D-Link DCS-3716 Bedienungsanleitung

This document will guide you through the basic installation

process for your new D-Link Network Camera.

DCS-3716

Documentation also available on

CD and via the D-Link Website

Quick Installation Guide

3 Megapixel Day & Night Network Camera

D-Link DCS-3716 Quick Install Guide

DCS-3716 Quick Install Guide

This installation guide provides basic instructions for installing the DCS-3716 Network Camera

on your network. For additional information about how to use the camera, please see the User

Manual which is available on the CD included in this package or from the D-Link support website.

Installation Steps

1. Verify the package contents against the list below.

2. Hardware Overview

3. Hardware Installation

4. Conguration with Wizard

5. Adjust the Zoom/Focus

Package Contents

• DCS-3716 Network Camera

• Camera Stand

• Manual and Software on CD-ROM

• CAT5 Ethernet Cable

• Power Adapter

• Quick Install Guide

• C-CS Mount Adapter (5mm Ring)

If any of the above items are missing, please contact your reseller.

D-Link DCS-3716 Quick Install Guide 3

Hardware Overview

LED

Power and network

indicator

I/O Connector

I/O connectors for external

devices

BNC

Analog video output

Reset

Press and hold this button for 5

seconds to reset the camera back

to the factory default settings

Audio In

Audio input connector

for a microphone

DC Power

12V DC

Audio Out

Audio output for external speakers

Ethernet (PoE)

RJ-45 connector for Ethernet

which can also be used to power

the camera using PoE

Lens Connector

Connect to a CS mount

ICR Sensor

The IR-Cut Removable sensor judges

lighting conditions and switches from

color to infrared accordingly

Rear Panel

Front Panel

D-Link DCS-3716 Quick Install Guide

1. AES: Auto Electric Shutter

2. DC IRIS: Toggle auto iris (DC drive)

3. NTSC: TV output signal selector

4. PAL: TV output signal selector

SD Card Slot

Insert a SD card (sold separately) for

storing recorded images and video

Right Panel

Left Panel

1 AES

2 DCIRIS

3 NTSC

4 PAL

DC-Iris Connector

Connector for DC auto iris lens

DIP Switch

Toggles between several regional formats

D-Link DCS-3716 Quick Install Guide 5

Hardware Installation

Basic Connection (without PoE)

Connect the camera to your switch or router via Ethernet cable, and then connect the supplied

power cable from the camera to a power outlet or surge protector (recommended).

Connection Using a PoE Switch

If using a PoE switch or router, connect the network camera via Ethernet cable. The Ethernet

cable will transmit data and power.

Note: Once power has been established, the LED will turn red. When the device has obtained

an IP address and is accessible, the LED will turn green.

D-Link DCS-3716 Quick Install Guide

Conguration with Wizard

Click Setup Wizard to begin the installation.

Insert the DCS-3716 CD into your computer's CD-ROM drive to begin the installation. If

the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start

automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive letter of

your CD-ROM drive.

After clicking Setup Wizard, the following window will open.

Click Next to continue.

Click Yes to accept the License Agreement.

Click Finish to complete the installation.

To start the installation process, click Next.

Note: The installation may take several minutes to nish.

D-Link DCS-3716 Quick Install Guide 7

Click on the D-Link Setup Wizard SE icon that was created

in your Windows Start menu.

Start > D-Link > Setup Wizard SE

Take a moment to conrm your settings and click Restart.

Select DHCP if your camera obtains an IP address when it

boots up from a DHCP server (i.e. router). Select Static IP if

the camera will use the same IP address each time it is started.

Click Next to proceed to the next page.

Enter the Admin ID and password. When logging in for the

rst time, the default Admin ID is admin with the password

left blank. Click Next to proceed to the next page.

The Setup Wizard will appear and display the MAC address

and IP address of your camera(s). If you have a DHCP server

on your network, a valid IP Address will be displayed. If your

network does not use a DHCP server, the network camera's

default static IP 192.168.0.20 will be displayed.

Click the Wizard button to continue.

D-Link DCS-3716 Quick Install Guide

Click on the D-Link Setup Wizard SE icon that was created

in your Windows Start menu.

Start > D-Link > Setup Wizard SE

Viewing Camera via Web Browser

This section shows your camera’s live video. You can select

your video prole and view or operate the camera. For

additional information about web conguration, please

refer to the user manual included on the CD-ROM or the

D-Link website.

Enter admin as the default username and leave the

password blank. Click OK to continue.

Select the camera and click the Link button to access the

web conguration.

The Setup Wizard will automatically open your web browser

to the IP address of the camera.

D-Link DCS-3716 Quick Install Guide 9

Adjust the Zoom/Focus

Adjust Zoom Ratio

Unscrew the focus controller to loosen the

zoom controller. Adjust the zoom factor by

moving the controller to the left or right until

the desired range is achieved. Tighten the

zoom controller once completed.

Adjust Focus

Unscrew the focus controller to loosen

it. Adjust the focal range by moving the

controller to the left or right until the image

is clear. Tighten the focus controller once

completed.

D-Link DCS-3716 Quick Install Guide

Notes

Andere Handbücher für DCS-3716

Inhaltsverzeichnis

Andere D-Link Sicherheitskamera Handbücher

D-Link

D-Link DCS-2310L Bedienungsanleitung

D-Link

D-Link DCS-930L Bedienungsanleitung

D-Link

D-Link DCS-7010L Bedienungsanleitung

D-Link

D-Link DCS-7513 Bedienungsanleitung

D-Link

D-Link DCS-4603 Bedienungsanleitung

D-Link

D-Link SECURICAM DCS-6511 Bedienungsanleitung

D-Link

D-Link DCS-7513 Bedienungsanleitung

D-Link

D-Link DCS-7410 Bedienungsanleitung

D-Link

D-Link SECURICAM DCS-7110 Bedienungsanleitung

D-Link

D-Link DCS-6616 Bedienungsanleitung

D-Link

D-Link DCS-936L Handbuch

D-Link

D-Link DCS-6112V Bedienungsanleitung

D-Link

D-Link DCS-8300LH Bedienungsanleitung

D-Link

D-Link DCS-931L Cloud Camera 1050 Bedienungsanleitung

D-Link

D-Link DCS-3010 Bedienungsanleitung

D-Link

D-Link DCS-7513 Bedienungsanleitung

D-Link

D-Link DCS-6500LH Bedienungsanleitung

D-Link

D-Link DCS-5222L Bedienungsanleitung

D-Link

D-Link DCS-942L Handbuch

D-Link

D-Link DCS-7413 Bedienungsanleitung

D-Link

D-Link DCS-2210 Bedienungsanleitung

D-Link

D-Link DCS-5230 Bedienungsanleitung

D-Link

D-Link MyDlink DCS-8515LH Bedienungsanleitung

D-Link

D-Link DCS-4612EK Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung