D-Link AirPremier DWL-2210AP Bedienungsanleitung

Softwareandspecificationssubjectto change without notice.DWL-2210AP.08262004

Before You Begin

Check Your Package Contents

If any of the above items are missing, please contact your reseller.

Networks with a DHCP Server: The DWL-2210AP is DHCPenabled by default. Usethe

KickStart Wizard on the DWL-2210AP CD-ROM to discover and identify DWL-2210AP

Access Points on your network.

Networks without a DHCP Server: The DWL-2210AP will default to an IP address of

192.168.0.50withasubnetmaskof255.255.255.0.Youwillneedtoassignyourcomputer

a Static IP address within the same range as the DWL-2210AP’s IP address for the

purposeof configuringthe DWL-2210AP.

CD-ROM with Manual and Software

Ethernet (CAT5e UTP/Straight-Through) Cable

Using a power adapter

with a different voltage

rating will damage and void

the warranty of this product.

Power Adapter

PoE Base Unit

DWL-2210AP

D-LinkD-Link

D-Link

AirAir

Air

PremierPremier

Premier™™

™™

™

802.11g/2.4GHz Wireless802.11g/2.4GHz Wireless

802.11g/2.4GHz Wireless

Add

daptive Aaptive A

aptive Aaptive A

aptive Access Pccess P

ccess Pccess P

ccess Poinoin

oinoin

ointt

This product can be set up usingThis product can be set up using

This product can be set up using

anan

any curry curr

y curry curr

y currenen

enen

ent web brt web br

t web brt web br

t web browserowser

owserowser

owser, i.e, i.e

, i.e, i.e

, i.e.,.,

.,.,

Internet Explorer 6 or NetscapeInternet Explorer 6 or Netscape

Internet Explorer 6 or Netscape

Navigator 6.2.3.Navigator 6.2.3.

Navigator 6.2.3.

DWL-2210AP AirPremier™Wireless Adaptive

AccessPoint

Power Cord

Connecting the DWL-2210AP to Your

Network

Therearetwomethods ofpoweringthe DWL-2210AP.Thepoweradaptercan plugdirectly

into the unit or plug into the PoE (Power over Ethernet) base unit. To connect power

directly to the DWL-2210AP, please follow the steps on this page. To use the PoE base

unit, please follow the steps on the next page.

Connecting Power Directly to the DWL-2210AP

A.Connect the power adapter to the receptor at the back panel of the DWL-2210AP.

Plugthe otherend ofthe poweradapter toa walloutlet orpower strip.The PowerLED

will turn ON toindicate proper operation.

B.Insert one end of the Ethernet cable to the Ethernet port on the back panel of the

DWL-2210AP and the other end of the Ethernet cable to an Ethernet Broadband

Router (i.e.,D-Link DI-604) orSwitch (i.e., D-Link DSS-5+).Note:You also havethe

option of connecting the DWL-2210AP directly to the computer that will be used for

configuration. The LAN LED light should illuminate to indicate a proper Ethernet

connection. (Note: The Ethernet Port on the DWL-2210AP isAuto-MDI/MDIX. This

allows you to use a straight-through or crossover Ethernet cable to connect to the

Ethernetport on the DWL-2210AP.)

C.The DWL-G650 AirPlus Xtreme G™Wireless Cardbus Adapter and the DWL-G520

AirPlus Xtreme G™Wireless PCI Adapter will connect, right out of the box with the

DWL-2210AP,using theirdefault wireless settings. Computers with802.11b wireless

adapters can also connect to the DWL-2210AP.

Connecting the DWL-2210AP to Your

Network (continued)

Connecting PoE (Power over Ethernet) to the DWL-2210AP

•Step 1: Connect one end of an Ethernet cable (included with your package) to the

LAN port on the DWL-2210AP and the other end of the Ethernet cable to the port

labeled P+DATA OUT on the PoE base unit.

•Step 2:Connect another Ethernet cable from the DATAIN port on the PoE base unit

to your router/switch or to a PC.

•Step 3: Attach the power adapter to the connector labeled POWER IN on the PoE

base unit.Attach the power cord to the power adapter and into an electrical outlet.

When you have completed the steps in this Quick Installation Guide, your connected

network should look similar to this:

Connecting the DWL-2210AP to Your

Network (continued)

Attachthewirelessantenna

to this connector.

Pressing this button restores theAccess

Pointtoitsoriginalfactorydefaultsettings.

LAN Port

Receptor

Reset Button

Antenna Connector Connects to a computer, a switch, router,

or PoE base unit using an Ethernet cable.

UsedtoconnectPower

Adapter directly to unit.

Connecting the DWL-2210AP to Your

Network (continued)

Front Panel

Rear Panel

WLANLED

The Wireless LAN LED will blink to

indicatewirelessnetwork activity.

LANLED

A solid green light indicates a good

networkconnection.Thelight willblink

when there is activity on the LAN.

Power LED

ThePowerLEDwilllightupsolid

greenwhen properlyconnected

toa valid power source.

TheKickStart Wizard isused to discoverand identify DWL-2210APAccess Points

on a network with a DHCP server. KickStart will not discover any other devices. If

your network does not have a DHCP server, please skip to Section 3 on page 9.

Using the KickStart Wizard on a Network

with a DHCP Server

Click onKickStart

(DHCPnetworks only)

Insert the DWL-2210AP CD-ROM into

yourCD-ROMdrive.Theautorunscreen

should load automatically. If not, go to

MyComputeranddoubleclickonyour

CD-ROMicon.

Click Next

The KickStart welcome

screenappears.

The KickStart Wizard will

search for DWL-2210AP

Access Points on your

network.

Click Administration Console

KickStart will display the

Access Point(s) on your

network. If necessary,

click Back to rescan the

network.

Click Next

Click OK

The DWL-2210AP login

screenwill appear.

Type admin in the User

nameandPasswordfields.

Using the KickStart Wizard on a Network

with a DHCP Server (continued)

The DWL-2210AP Web-management interface will appear. Please refer to the

user manual located on the CD-ROM for details on configuring the DWL-2210AP.

Using the KickStart Wizard on a Network

with a DHCP Server (continued)

Using a Static IP Address to Connect to

the DWL-2210AP

To assign a Static IP Address on the computer that you are using to configure the

DWL-2210AP,follow the stepsfor the appropriate operating system:

Windows XP:

Go to Start, click on Control Panel

double-click on Network Connections,

right-click on Local Area Connections

and select Properties.

Highlight Internet Protocol (TCP/IP)

Click Properties

Select Use the following IP address

ClickOK

IP address: 192.168.0.51

Subnet mask: 255.255.255.0

Inputa static IP address in the same range

as the DWL-2210AP’s IP address of

192.168.0.50.Each computer/device must

have a unique IP address.

Go to Start > Settings > Network and Dial-

up Connections.Double-click on the Local

Area Connection associated with the

NetworkAdapterinstalledon yoursystemand

select Properties.

Click Properties

Click Internet Protocol (TCP/IP)

Select Use the following IP address

Click OK

Windows 2000:

IP address: 192.168.0.52

Subnet mask: 255.255.255.0

Inputa static IP address in the same range

as the DWL-2210AP’s IP address of

192.168.0.50.Each computer/device must

have a unique IP address.

Using a Static IP Address to Connect to

the DWL-2210AP

Andere Handbücher für AirPremier DWL-2210AP

Inhaltsverzeichnis

Andere D-Link Drahtloser Zugangspunkt Handbücher

D-Link

D-Link DWL-3500AP Service-Handbuch

D-Link

D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM... Bedienungsanleitung

D-Link

D-Link DBA-1510P Bedienungsanleitung

D-Link

D-Link DWL-3200AP - AirPremier - Wireless Access... Bedienungsanleitung

D-Link

D-Link DWL-8220AP - AirPremier Wireless Switch Dualband Access... Bedienungsanleitung

D-Link

D-Link DAP-600P Bedienungsanleitung

D-Link

D-Link AirPremier N DAP-2690 Bedienungsanleitung

D-Link

D-Link DWL-7230AP - xStack - Wireless Access Point Bedienungsanleitung

D-Link

D-Link DAP-3666 Bedienungsanleitung

D-Link

D-Link DAP-1665 Bedienungsanleitung

D-Link

D-Link DAP-1533 Bedienungsanleitung

D-Link

D-Link AMPLIFI DAP-1525 Bedienungsanleitung

D-Link

D-Link DAP-2660 Bedienungsanleitung

D-Link

D-Link DAP-2610 Bedienungsanleitung

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

D-Link

D-Link Rangebooster N 650 Access Point DAP-1353 Bedienungsanleitung

D-Link

D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM... Bedienungsanleitung

D-Link

D-Link AirPremier N DAP-2690 Bedienungsanleitung

D-Link

D-Link DAP-1160 Bedienungsanleitung

D-Link

D-Link DWL-7100AP Bedienungsanleitung

D-Link

D-Link DWL-8720AP Bedienungsanleitung

D-Link

D-Link DPN-101G Bedienungsanleitung

D-Link

D-Link Nuclias Connect DAP-2622 Bedienungsanleitung

D-Link

D-Link AirPremier N DAP-3525 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung

EnGenius

EnGenius EAP350 Bedienungsanleitung