D-Link AirPremier N DAP-3525 Bedienungsanleitung

DAP-3525

Dual Band Exterior PoE Access Point

Quick Install Guide

Business Class Networking

System Requirements

Package Contents

• D-Link DAP-3525 • Mounting Plate

• Power Adapter • Power Cord

• 4m Ethernet Cable • PoE Base

• Grounding Wire • Mounting Screws

If any of following items are missing, please contact your reseller:

Ethernet Port

Connects DAP-3525 to the network

via Ethernet cable.

Power LED

A solid green light indicates a proper

connection to the power supply. This

LED will blink red during boot up.

Reset Button

Resets the Access Point to factory

defaults.

LAN LED

A sold green light indicates the Ethernet

connection is good. The light will blink

during data transmission.

WLAN LED

A blinking green light indicates the

wireless function is working. The light

will blink fast during data transmission.

Important: Before connecting, you must register your Access Point online.

• Internet connectivity

• Computer with a Windows®, Macintosh®, or Linux-based operating system

• Browser with Firefox 3.6, Chrome 5.0, Safari 4.0, Internet Explorer 8.0, or later versions

• Note: your Access Point includes a one-year subscription to the CloudCommand™

online service. After one year, the service requires an annual subscription.

To properly congure your Access Point, you need:

1342 5

Registering Your Access Point Online

New Customer: If you don’t have an existing CloudCommand™ account, create

one by following the instructions in our simple step-by-step wizard. The wizard

will guide you through the initial setup of your entire wireless network.

Step 1: Before you can use the Access Point, you must register it online.

Locate the Unit Identication Code ( UIC ) on the yellow label placed on the

underside of your Access Point.

Step 3 : Choose the appropriate registration scenario.

Step 2: Go to http://dlink.cloudcommand.com on a compatible browser

( Firefox 3.6, Chrome 5.0, Safari 4.0, Internet Explorer 8.0, or later versions ).

Existing Customer: If you already have a CloudCommand™ account, please

follow the instructions.

Welcome to D-Link’s line of cloud-managed wireless Access

Points. Leverage the product’s online interface to congure,

deploy, secure and manage your entire wireless network.

Product Label

UIC: dl1153422ba3

Unit Name:

DAP-3525

FCC ID: KA2AP3520A1

IC: 4216A-AP3525A1

Model: DAP-3525A1

MA DE I N CH IN A CM

CCAXXXXXXXXXXX

MA C ID :X XX XX X0 00002

CloudCommand™ Dashboard

UIC: dl1153422ba3

Unit Name:

If your network automatically assigns IP addresses ( DHCP service ), connect

the Access Point directly to the network by plugging an Ethernet cable into

the LAN port on its rear panel. Insert the cable’s other end into your existing

switch or router with Internet connectivity.

No additional configuration is required. Within a few minutes the Access

Point will self configure and become ready to use. You have the option

of later reconfiguring your Access Point to a static IP address using the

CloudCommand™ interface .

The DAP-3525 is PoE ( Power over Ethernet ) compliant. You can power it

either by using a PoE switch or the included power adapter. Once powered,

the green power LED will turn ON to indicate proper operation.

Deploying Your Access Point with Dynamic IP Addressing

Option 1:

DAP-3525

Switch or Router

Internet

If your network does not automatically assign IP addresses ( No DHCP

service ), follow these steps to properly configure your Access Point:

Deploying Your Access Point without Dynamic IP Addressing

Option 2:

Step 1: Connect the Access Point directly to your computer using an

Ethernet cable.

Step 2: Configure the Ethernet connection of your computer as follows:

DAP-3525 PC or Mac

Configure APs

Right-click on the Local Area

Connection which represents your

network adapter and select Properties.

Highlight Internet Protocol (TCP/IP)

and click Properties.

Click Use the following IP address

and enter an IP address that is on

the same subnet as your network

or the LAN IP address on your new

DAP-3525.

Click OK twice to save your settings.

Windows® 7 - Click on Start > Control Panel > Network and Internet >

Network and Sharing Center > Change Adapter Setting.

Windows Vista® - Click on Start > Control Panel > Network and Internet >

Network and Sharing Center > Manage Network Connections.

Windows® XP - Click on Start > Control Panel > Network Connections.

Windows® 2000 - Right-click My Network Places > Properties.

Type “admin” in the User Name eld.

Leave the Password eld blank.

Click the Login button.

Step 4: Once you enter the IP address or device name, the login screen will

appear.

Step 3: Launch a web browser and type either the IP address of the access

point (default - 192.168.0.50) or the default device name of the access point

(http://dlinkapxxxx where xxxx are the last 4 numbers of the MAC address).

The MAC Address is on the lower-left corner of the device label (highlighted

below).

DAP-3525

FCC ID: KA2AP3520A1

IC: 4216A-AP3525A1

Model: DAP-3525A1

MADE IN CHINA CM

CCAXXXXXXXXXXX

MAC ID:XXXXXX000002

Step 6: No additional configuration is required. Within a few minutes the

Access Point will self configure and become ready to use. You have the option

of later reconfiguring your Access Point to a new static IP address using the

CloudCommand™ interface.

The DAP-3525 is PoE ( Power over Ethernet ) compliant. You can power it

either by using a PoE switch or the included power adapter. Once powered,

the green power LED will turn ON to indicate proper operation.

Step 5: Once logged in, you will be able to change the Access Point’s IP

address and DNS information to match your existing network configuration.

Step 7: Restore setting change in Step 2.

DAP-3525

Power over Ethernet

Switch or Router Internet

To view your CloudCommand™ dashboard, please log in at

http://dlink.cloudcommand.com. The dashboard is your starting point to

monitor network activity, troubleshoot problems, authorize and disconnect

individual devices, or make conguration changes to your Access Point(s).

CloudCommand™ Dashboard

1 7

Manage Access Points and connected

devices

View alerts and events, and set up

alert notications

Display detailed activity reports for

users and Access Points

Change congurations, Wi-Fi network

names, security, and passwords

View activity graphs

View devices connected to your

guest network

View devices connected to your

primary wireless network

View Access Points in your network

Read FAQs

Authorize a new device to connect

to your wireless network

Monitor alerts in real time

235

Connect the Ethernet Cable

This product should ONLY be installed by an experienced installer who is

familliar with local building and safety codes and where ever applicable, is

licensed by the appropriate authorities. Failure to do so may void the D-Link

product warranty and may expose the end user or the service provider to legal

and nancial liabilities. D-Link and its resellers or distributors are not liable for

injury, damage, or violation of regulations associated with the installation of

outdoor units or antennas.

A safety grounding system is necessary to protect your outdoor installation

from lightning strikes and the build-up of static electricity. The grounding

system must comply with the National Electrical Code and safety standards

that apply in your country. Always check with a qualied electrician if you

are in doubt as to whether your outdoor installation is properly grounded.

Note: DAP-3525 is certied to IP65 which means the device is protected

from dust and low pressure jets of water from all directions - limited ingress

permitted. It is recommended to place this device under a roof.

Installation / Mounting

Step 1: Connect the supplied Ethernet cable with the waterproof enclosure to the

Ethernet port on the DAP-3525.

Step 2: After plugging the Ethernet cable in the port, tighten the waterproof enclosure.

Step 3: Attach the grounding cable and tighten the screw.

Attach the Mounting Plate

Step 1: Insert provided wall anchors in the wall where the mounting plate will

be attached. Use the provided screws to secure the mounting plate on the wall.

Inhaltsverzeichnis

Andere D-Link Drahtloser Zugangspunkt Handbücher

D-Link

D-Link xtreme n duo dap-1522 Kurzanleitung

D-Link

D-Link AirPlus Xtreme G DWL-2000AP Bedienungsanleitung

D-Link

D-Link DBA-1520P Bedienungsanleitung

D-Link

D-Link AirPro DWL-6000AP Bedienungsanleitung

D-Link

D-Link AirPlus DWL-900AP Bedienungsanleitung

D-Link

D-Link DBA-1510P Bedienungsanleitung

D-Link

D-Link DWL-6610AP Bedienungsanleitung

D-Link

D-Link D DWL-8200AP DWL-8200AP Bedienungsanleitung

D-Link

D-Link DWL-3200AP - AirPremier - Wireless Access... Bedienungsanleitung

D-Link

D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM... Bedienungsanleitung

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

D-Link

D-Link DAP-1160L Bedienungsanleitung

D-Link

D-Link DAP-3220 Bedienungsanleitung

D-Link

D-Link DAP-1155 Bedienungsanleitung

D-Link

D-Link DWL-3200AP - AirPremier - Wireless Access... Bedienungsanleitung

D-Link

D-Link DWL-7130AP - xStack - Wireless Access Point Bedienungsanleitung

D-Link

D-Link DAP-2553 - Wireless N Dual Band Gigabit Access... Bedienungsanleitung

D-Link

D-Link DWL-6700AP Bedienungsanleitung

D-Link

D-Link AirPlusXtreme G+ DWL-2000AP+ Bedienungsanleitung

D-Link

D-Link DAP-2610 Bedienungsanleitung

D-Link

D-Link AirXpert DWL-7000AP Bedienungsanleitung

D-Link

D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM... Bedienungsanleitung

D-Link

D-Link DWL-2200AP - AirPremier - Wireless Access... Bedienungsanleitung

D-Link

D-Link DWL-6600AP Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung

EnGenius

EnGenius EAP350 Bedienungsanleitung