D-Link DAP-2230 Merkblatt

- 1 -

Manual to install the firmware

For DAP-2230 Rev.A, DAP-2310 Rev.B, DAP-2360 Rev.B, DAP-2610 Rev.A,

DAP-2660 Rev.A, DAP-2680 Rev.A, DAP-2695 Rev.A and DAP-3662 Rev.A

Important:

After the firmware upgrade the DAP can’t be used in a Central Wi-Fi Manager (CWM)

System or in an AP-Array System.

You would need to install the „not-NC-firmware“ into your DAP again.

See the attached manual

“Manual for Downgrade from Nuclias Connect Firmware.pdf”

Recommendation:

Connect the DAP and the PC, with it you make the firmware upgrade, with a LAN cable

with your network, there is also the DHCP server available.

For the installation of the firmware please follow this.

1. Get access to the setup of your DAP via web browser.

The default address is http://192.168.0.50 or when you already implemented the DAP

into your network please call the IP-address this you configured into you DAP or this the

DAP got from the DHCP server in you network.

2. By default the setup has no password.

At User name enter admin and then click onto Login.

Note:

Did you set an Admin-Password please enter this.

Do you don’t know the Admin-Password anymore you must reset the DAP to factory

defaults (Factory Reset).

For this press the Reset button of the running DAP for example with a paperclip or pencil

for 5-10 seconds.

- 2 -

3. At the top choose the menu Maintenance and then in the open menu

Firmware and SSL Certification Upload.

4. At Upload Firmware From File click onto Choose File.

Pick the previously un-zipped firmware file

DAP-2610_RevA_Firmware_200r063.bin

and click onto Upload.

5. The firmware will be installed now.

This takes close to 5 minutes.

6. Important:

You must reset the DAP to factory defaults (Factory Reset).

For this press the Reset button of the running DAP for example with a paperclip or pencil

for 5-10 seconds.

After the DAP is restarted it is ready to integrate into a Nuclias Connect environment.

- 3 -

If your DAP is build-in and you cant’t press the Reset button easily you

can reset it over the setup instead.

7. Log-in into the setup again.

At User name enter admin and then click onto Login.

Did you set an Admin-Password please enter it.

8. At System Country choose any country and click onto Update.

- 4 -

9. Please wait 2 minutes.

10. Log-in into the setup again.

At User name enter admin.

At Password please enter also admin.

From now this is the default Admin password until you configure the DAP new.

Click onto Login.

11. At the top choose the menu System.

Click onto Restore.

- 5 -

12. Click onto OK.

13. Please wait two minutes.

After the DAP is restarted it is ready to integrate into a Nuclias Connect environment.

To check the detailed version number of the installed version please log-in into the setup

of your DAP.

In the address line of your web browser enter

http://<ip-adresse>/version.txt

The <ip-adresse> is for the IP-address of your DAP.

A page with detailed information about the firmware appears.

Andere Handbücher für DAP-2230

3

Dieses Handbuch passt für folgende Modelle

7

Inhaltsverzeichnis

Andere D-Link Drahtloser Zugangspunkt Handbücher

D-Link

D-Link AirPremier N DAP-2360 Bedienungsanleitung

D-Link

D-Link AirXpert DWL-7000AP Bedienungsanleitung

D-Link

D-Link DWL-7200AP - AirPremier AG - Wireless Access... Bedienungsanleitung

D-Link

D-Link AirPlus Xtreme G DWL-2000AP Bedienungsanleitung

D-Link

D-Link AirPremier DWL-7700AP Bedienungsanleitung

D-Link

D-Link D DWL-G700AP DWL-G700AP Bedienungsanleitung

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

D-Link

D-Link DWL_7100 Bedienungsanleitung

D-Link

D-Link D DWL-8200AP DWL-8200AP Bedienungsanleitung

D-Link

D-Link DAP-1533 Bedienungsanleitung

D-Link

D-Link AirPremier N DAP-2690 Bedienungsanleitung

D-Link

D-Link AirPro DWL-6000AP Bedienungsanleitung

D-Link

D-Link AirPremier N DAP-2690 Bedienungsanleitung

D-Link

D-Link WL-7620AP Bedienungsanleitung

D-Link

D-Link DWL-2130AP - xStack - Wireless Access Point Bedienungsanleitung

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

D-Link

D-Link DAP-1665 Bedienungsanleitung

D-Link

D-Link AirPremier N DAP-2360 Bedienungsanleitung

D-Link

D-Link DWL-700AP - Air - Wireless Bridge Bedienungsanleitung

D-Link

D-Link AirXpertDWL-7000AP Bedienungsanleitung

D-Link

D-Link DWL-3200AP - AirPremier - Wireless Access... Bedienungsanleitung

D-Link

D-Link DAP-2553 - Wireless N Dual Band Gigabit Access... Bedienungsanleitung

D-Link

D-Link DBA-2820P Bedienungsanleitung

D-Link

D-Link DAP-2610 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung

EnGenius

EnGenius EAP350 Bedienungsanleitung