D-Link NUCLIAS CONNECT DAP-2680 Bedienungsanleitung
This document will guide you through the basic installation
process for your new D-Link Wireless AC Access Point.
DAP-2680
Quick Installation Guide
Nuclias Connect AC1750 Wave 2 Dual Band PoE Access Point
D-Link DAP-2680 Quick Start Guide
2
ENGLISH
DAP-2680 Quick Start Guide
This installation guide provides basic instructions for installing the DAP-2680 Wireless Access
Point on your network. For additional information about how to use the Access Point, please
see the User’s Manual which is available on the CD included in this package or from the
D-Link support website.
System Requirements
Minimum System Requirements:
• an Ethernet port, or an installed Ethernet adapter
• Internal Explore 11, Safari 7, Firefox 28, Google Chrome 33 or later versions of these
browsers
1. Package Contents
DAP-2680 802.11ac Power over Ethernet (PoE) Access Point
Mounting Brackets
Ceiling Brackets
Quick Start Guide
If any of the above items are missing, please contact your reseller.
NOTE no PSU supplied. To power the units use an D-Link 802.3at PoE switch or the D-Link
DPE-301GI PoE injector.
D-Link DAP-2680 Quick Start Guide 3
ENGLISH
2. Hardware Overview
LED
Power/Status LED - Dual color (Red/green)
. Flash Red during booting up or malfunction
. Static Green while it’s ready/working
. Solid Red while boot up fail
Interfaces
Power Receptor
(*Note no longer
used, replaced
by PoE)
LAN Port (PoE)
* PoE kit (injector and adapter) is NOT include in the package and it can be purchased
with the model name "DPE-301GI".
D-Link DAP-2680 Quick Start Guide
4
ENGLISH
Power on the access point
To power on the DAP-2680, you can use ONE of the following methods:
1. Plug one end of your Ethernet cable into the LAN port of the DAP-2680, and the other
end into a port on a 802.3at PoE switch.
2. Purchase separately a DPE-301GI PoE injector if you need to connect the Access
Point without a 802.3at PoE Switch.
Congure the access point
To set up and manage the DAP-2680, use one of the following methods:
1. Connect the access point and your computer to the same switch. Manage the access
point from the computer.
Enter http://dap2680macxxxx.local/ (xxxx means mac’s last four characters) in the
address field of your browser, which is the default IP address of the access point.
Log in to the Administration Web pages. The default login information is:
Username: admin
Password: admin
2. Connect the access point and your computer via DPE-301GI. Manage the access
point from the computer.
Ensure your computer is congured with a static IP address in 192.168.0.0/24 subnet.
Launch a web browser, type the default IP address of the access point http://
dap2680macxxxx.local/ (xxxx means mac’s last four characters) and then press Enter.
Log in to the Administration Web pages. The default login information is:
Username: admin
Password: admin
3. Installation
OR
Computer
802.3at PoE Switch
DAP-2680
Computer
PoE Injector
Power
Adapter
D-Link DAP-2680 Quick Start Guide 5
ENGLISH
Solid wall or ceiling
Installation
1. Place the mounting bracket on a wall or
ceiling.
5. Plug the Ethernet cable into the LAN
port on the access point.
6. To attach the access point to the
mounting bracket.
2. Mark the points where you will insert the
screws. Take out the mounting ring.
3. Drill holes in the marked points and
insert the plastic wall anchors.
4. Use the supplied screws to attach the
mounting ring to the wall.
D-Link DAP-2680 Quick Start Guide
6
ENGLISH
1. Clip two ceiling brackets onto the ceiling
panels. Make sure both brackets are in
line with each other.
2. Use the provided screws to attach the
mounting ring to the ceiling bracket.
3. Plug the Ethernet cable into the LAN
port on the access point.
4. Place the DAP-2680’s male bracket
in the mounting bracket’s female
bracket. Click DAP-2680 and the
mounting bracket to lock in position.
Ceiling bracket
Ceiling crossbar
Mounting with a ceiling bracket
Installation
TECHNICAL SUPPORT dlink.com/support
GPL Code Statement
This D-Link product includes software code developed by third parties,
including software code subject to the GNU General Public License (“GPL”)
or GNU Lesser General Public License (“LGPL”). As applicable, the terms of
the GPL and LGPL, and information on obtaining access to the GPL code
and LGPL code used in this product, are available to view the full GPL Code
Statement at:
https://tsd.dlink.com.tw/GPL
The GPL code and LGPL code used in this product is distributed WITHOUT
ANY WARRANTY and is subject to the copyrights of one or more authors. For
details, see the GPL code and the LGPL code for this product and the terms of
the GPL and LGPL.
Written Oer for GPL and LGPL Source Code
Where such specific license terms entitle you to the source code of such
software, D-Link will provide upon written request via email and/or
traditional paper mail the applicable GPL and LGPLsource code files via
CD-ROM for a nominal cost to cover shipping and media charges as allowed
under the GPL and LGPL.
Please direct all inquiries to:
Email:
Snail Mail:
Attn: GPLSOURCE REQUEST
D-Link Systems, Inc.
17595 Mt. Herrmann Street
Fountain Valley, CA 92708
Déclaration relative au code GPL
Ce produit D-Link comprend des codes de logiciel développés par
des tiers, y compris des codes de logiciel soumis à la Licence Publique
Générale GNU ( «GPL») ou à la Licence Publique Générale GNU Limitée
(«LGPL»). Le cas échéant,, les conditions de la GPL et de la LGPL, ainsi
que les informations permettant d’accéder au code GPL et au code LGPL
utilisés dans ce produit, sont disponibles pour consulter la déclaration de
code GPL complète au:
http://tsd.dlink.com.tw/GPL
Les codes GPL et LGPL utilisés dans le produit sont distribués SANS
AUCUNE GARANTIE et sont soumis aux droits d'auteur d'un ou de
plusieurs auteurs. Pour plus de détails, reportez-vous aux codes GPL et
LGPL de ce produit et aux conditions de la GPL et de la LGPL.
Ore écrite pour le code source GPL et LGPL
Si des conditions spécifiques de la licence vous donnent droit au code
source du logiciel, D-Link fournira, sur demande écrite par courrier
électronique et/ou courrier papier traditionnel, les fichiers de code
source GPL et LGPL applicables via CD-ROM à un coût nominal pour
couvrir les frais d'expédition et de support comme autorisé par la licence
GPL et LGPL.
Veuillez adresser toutes les demandes à:
Courrier électronique:
Courrier ordinaire:
Attention: GPLSOURCE REQUEST
D-Link Systems, Inc.
17595 Mt. Herrmann Street
Fountain Valley, CA 92708
Ver. 1.01(WW)_130x183
2019/10/29
Andere Handbücher für NUCLIAS CONNECT DAP-2680
6
Inhaltsverzeichnis
Andere D-Link Drahtloser Zugangspunkt Handbücher
D-Link
D-Link DAP-2230 Bedienungsanleitung
D-Link
D-Link DWL-2600AP Service-Handbuch
D-Link
D-Link DWL-8200AP - AirPremier Managed Dualband Access... Bedienungsanleitung
D-Link
D-Link DWL-6600AP Bedienungsanleitung
D-Link
D-Link DAP-2553 - Wireless N Dual Band Gigabit Access... Bedienungsanleitung
D-Link
D-Link Rangebooster N 650 Access Point DAP-1353 Bedienungsanleitung
D-Link
D-Link DBA-X2830P Bedienungsanleitung
D-Link
D-Link xtreme n duo dap-1522 Kurzanleitung
D-Link
D-Link DWL-3500AP Bedienungsanleitung
D-Link
D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung
D-Link
D-Link DWL-2200AP - AirPremier - Wireless Access... Bedienungsanleitung
D-Link
D-Link DIR-506L Bedienungsanleitung
D-Link
D-Link DWL-3600AP Service-Handbuch
D-Link
D-Link Air Premier DAP-2695 Bedienungsanleitung
D-Link
D-Link DAP-3315 Bedienungsanleitung
D-Link
D-Link DAP-3310 Bedienungsanleitung
D-Link
D-Link DAP-2660 Bedienungsanleitung
D-Link
D-Link AirPremier N DAP-3690 Bedienungsanleitung
D-Link
D-Link AirPremier N DAP- 2590 Bedienungsanleitung
D-Link
D-Link DWL-2200AP - AirPremier - Wireless Access... Bedienungsanleitung
