D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

WIRELESS 108G ACCESS POINT

Quick Installation Guide+

Руководство по быстрой установке+

Guía de Instalación Rápida+

Guia de Instalação Rápida+

快速安裝指南+

Petunjuk Pemasangan Cepat+

クイックインストールガイド+

DWL-2100AP

D-Link

AirPlus

XtremeGTM

802.11g/108Mbps

Wireless Access Point

5V 2.0A DC Power Adapter

Software and speciﬁcations subject to change without notice. DWL-2100AP. 12152004

Before You Begin

Check Your Package Contents

DWL-2100AP 802.11g/108Mbps Wireless

Access Point

CD-ROM (containing Manual and

Warranty)

Ethernet (CAT5 UTP) Cable

If any of the above items are missing, please contact your reseller.

It’s best to use a computer (with an Ethernet adapter) that is connected to a switch

for conﬁguring the DWL-2100AP. The default IP address for the DWL-2100AP is

192.168.0.50 with a Subnet Mask of 255.255.255.0. You will need to assign your

computer a Static IP address within the same range as the DWL-2100AP’s IP address

for the purpose of conﬁguring the DWL-2100AP. See the Appendix if you need

assistance in assigning a Static IP address for your network adapter.

Using a power

supply with a

different voltage rating

will damage and void the

warranty of this product.

This product can be set

up using any current web

browser, i.e., Internet

Explorer 6 or Netscape

Navigator 6.2.3.

First, connect the power adapter to the receptor at the back panel of the

DWL-2100AP and then plug the other end of the power adapter to a wall outlet or

power strip. The Power LED will turn ON to indicate proper operation.

B. Insert one end of the cable to the Ethernet port on the back panel of the

DWL-2100AP and the other end of the cable to an Ethernet Broadband Router

(i.e., D-Link DI-604) or Switch (i.e., D-Link DES-1005D). Note: You also have the

option of connecting the DWL-2100AP directly to the computer that will be used for

conﬁguration. The Link LED light will illuminate to indicate a proper Ethernet

connection. (Note: The Ethernet Port on the DWL-2100AP is Auto-MDI/MDIX.

Meaning you can use a straight-through or crossover-Ethernet cable to connect to

the Ethernet port on the DWL-2100AP.)

C. The DWL-G650 AirPlus Xtreme G Wireless Cardbus Adapter and the DWL-G520

AirPlus Xtreme G Wireless PCI Adapter will connect, out of the box , with the

DWL-2100AP, using their default wireless settings. Computers with 802.11b/g

wireless adapters can also connect to the DWL-2100AP.

Connecting the DWL-2100AP Wireless

Access Point to Your Network

C. Antennas Used to

wirelessly connect to

802.11b/g adapters.

B. LAN PORT for

connecting the access

point to a switch on the

local network with an

ethernet cable

Reset Button

Pressing this button restores

the Access Point to its original

factory default settings.

A. Receptor for

Power Adapter.

Using the Setup Wizard

Open your Web

browser and type

“http://192.168.0.50”

into the URL address

box. Then press the

Enter or Return key.

The logon pop-up

screen will appear.

Type “admin” for the

username and leave

the password ﬁeld

blank.

Click OK

When you have

completed the steps in

this Quick Installation

Guide, your connected

network should look

similar to this:

Once you have

logged in, the Home

screen will appear.

You will see the following

screens.

Click Run Wizard

Click Next

Using The Setup Wizard (continued)

Click Next

Step 1 - Set up your

new password. You have

the option to establish a

password.

Step 2 - Wireless Setup

The default wireless

settings are:

SSID = dlink

Channel = 6

You can change these

settings to match an

existing wireless network.

Click Next

Using The Setup Wizard (continued)

Step 3 - Encryption

The DWL-2100AP is capable

of two levels of wireless

encryption 64-bit and 128-bit.

By default the encryption is

disabled. You can change the

encryption settings for more

secure wireless communication.

Your Setup is Complete!

Using The Setup Wizard (continued)

Click Next

Click Restart

Click Close

You will be returned to the Home tab.

Click to Exit

For additional settings or information, refer to the Advanced, Tools, or Status tabs on

the web-management interface; or to the manual located on the CD-ROM.

Appendix

To assign a Static IP Address to the laptop or computer that you are using to conﬁgure

the DWL-2100AP, please do the following:

Assigning a Static IP Address in Windows

Go to Start > Double- click on Control

Panel > Double-click on Network

Connections > Right-click on Local

Area Connections > Click Properties

Click Properties

Select Use the following IP address in

the Internet Protocol (TCP/IP) Properties

window

Input your IP address and subnet mask.

(The IP Address must be within the same

range as the DWL-2100AP. The IP Address

of the DWL-2100AP is 192.168.0.50. You

can assign 192.168.0.51 for your computer.

No two computers can have the same

IP Address. Assign a subnet mask of

255.255.255.0.)

Highlight Internet Protocol (TCP/IP)

Click OK

Andere Handbücher für DWL-2100AP - AirPlus Xtreme G

Inhaltsverzeichnis

Sprachen:

Andere D-Link Drahtloser Zugangspunkt Handbücher

D-Link

D-Link DAP-3310 Bedienungsanleitung

D-Link

D-Link DAP-1665 Bedienungsanleitung

D-Link

D-Link DAP-1150 Bedienungsanleitung

D-Link

D-Link DAP-1360 Bedienungsanleitung

D-Link

D-Link AirPremier N DAP-3525 Bedienungsanleitung

D-Link

D-Link Rangebooster N 650 Access Point DAP-1353 Bedienungsanleitung

D-Link

D-Link Air Premier DAP-2695 Bedienungsanleitung

D-Link

D-Link DAP-2330 v 1.0 Bedienungsanleitung

D-Link

D-Link DWL-2130AP - xStack - Wireless Access Point Bedienungsanleitung

D-Link

D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM... Kurzanleitung

D-Link

D-Link DAP-3315 Bedienungsanleitung

D-Link

D-Link DAP-2553 - Wireless N Dual Band Gigabit Access... Bedienungsanleitung

D-Link

D-Link AirPremier N DAP-2310 Bedienungsanleitung

D-Link

D-Link AirPremier N DAP-2360 Bedienungsanleitung

D-Link

D-Link AirPlus DWL-900AP+ Bedienungsanleitung

D-Link

D-Link DAP-3410 Bedienungsanleitung

D-Link

D-Link DWR-730 Bedienungsanleitung

D-Link

D-Link DVA-G3670B Bedienungsanleitung

D-Link

D-Link DAP-1665 Bedienungsanleitung

D-Link

D-Link DAP-2682 Bedienungsanleitung

D-Link

D-Link DBA-1510P Bedienungsanleitung

D-Link

D-Link DAP-1155 Bedienungsanleitung

D-Link

D-Link DAP-2553 - Wireless N Dual Band Gigabit Access... Bedienungsanleitung

D-Link

D-Link AirPlus DWL-900AP+ Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung

EnGenius

EnGenius EAP350 Bedienungsanleitung