D-Link DWL-6700AP Bedienungsanleitung
This document will guide you through the
basic installation process for your new
D-Link Unied Wireless Access Point.
DWL-6700AP
Documentation also available on
CD and via the D-Link Website
Quick Installation Guide
802.11n Unied Access Point
2 D-Link DWL-6700AP Quick Install Guide
ENGLISH
About This Guide
This installation guide provides basic instructions
for installing the DWL-6700AP Wireless Access
Point on your network. For additional information
about how to use the Access Point, please see
the User Manual, which is available on the CD
included in this package or from the D-Link
support website.
Unpacking the Product
System Requirements
Open the shipping carton and carefully unpack its
contents. Please consult the packing list below to
make sure all items are present and undamaged.
If any item is missing or damaged, please contact
your local D-Link reseller for a replacement.
-DWL-6700AP 802.11n Unied Access Point
-Power Cord
-PoE adapter (24 V / 1 A)
-Shielded Cat 5E Ethernet Cable
-Mounting Ties (Qty. 2)
-CD-ROM
-Grounding Wire
Note: Using a different PoE adapter from the
one included with the DWL-6700AP may cause
damage and will void the warranty for this product.
Optional Accessories
-N/A
Note: These accessories are not included in
the package. If any of these items are required,
please contact your reseller to order it.
-CD-ROM Drive
-Windows®, Macintosh®, or Linux-based
operating system
-Ethernet port or installed Ethernet adapter
-Internet Explorer 7.0, Safari 5.0, Firefox 4.0,
or higher
Hardware Overview
Figure 1. DWL-6700AP LEDs
LEDs
Status (Green):
LED1 (red):
LED2 (amber):
LED3 (green):
LED4 (green):
LED1 (red):
LED2 (amber):
LED3 (green):
LED4 (green):
2.4 GHz (green):
LAN1 (PoE in)
(green):
LAN2 (PoE in)
(green):
Blinks if there is a system error.
When the completes booting,
the LED will be solid green.
5 GHz WiFi Strength
WDS Mode:
Signal strength 20%
Signal strength 40%
Signal strength 60%
Signal strength 80%
AP Mode:
The radio is up, LED is solid
red, and blinks whenever is
data transmitting/receiving.
Off
Off
Off
The radio is up, LED is solid
green, and blinks whenever is
data transmitting/receiving.
The physical connection is up,
LED is solid green, and blinks
whenever is data transmitting/
receiving.
The physical connection is up,
LED is solid green, and blinks
whenever is data transmitting/
receiving.
D-Link DWL-6700AP Quick Install Guide 3
ENGLISH
Power on the access point
To power on the DWL-6700AP, you can only use
the proprietary PoE adapter included with the
DWL-6700AP.
1. Connect the supplied PoE adapter and power
cord to the AC power source.
2. Plug one end of an Ethernet cable into the
LAN1 (or LAN2) port of the DWL-6700AP
and the other end into a PoE out from a PoE
adapter.
• Manage the access point from the computer:
Connect the access point and your computer
directly via a straight-through Ethernet cable.
Installation
ComputerDWL-6700AP
ComputerDWL-6700AP
ComputerDWL-6700AP
Switch or Router
Reset Button
Reset Button
LAN (Data in)
LAN1 Port (PoE in)*
LAN2 Port (PoE in)*
PoE out
(Connect to DWL-
6700AP's LAN1 or LAN2
Congure the access point
To set up and manage the DWL-6700AP, use one
of the following methods:
• LAN1 or LAN2 on DWL-6700AP to Ethernet
Port labeled POE on PoE Adapter
• Connect the Power Cord to the PoE Adapter
and a power outlet
• Connect Computer to Ethernet Port labeled
LAN on PoE Adapter
Figure 2. DWL-6700AP Rear Panel
Interfaces
• Manage the access point from the computer
via the Switch or Router: Connect the access
point and your computer to the same switch
or router.
* DWL-6700AP can be powered by the included PoE
adapter from either LAN1 or LAN2
Figure 3. PoE Adapter Panel
Figure 4. Deployment Example
LAN
Power Active
POE
RST
LAN1 or LAN2
on DWL-6700AP
to Ethernet Port
labeled PoE on
PoE Adapter
Connect the
Power Cord to
the PoE Adapter
and a power
outlet
Connect Computer to
Ethernet Port labeled
LAN on PoE Adapter
LAN
PoE
POWER IN
Computer
DWL-6700AP
4 D-Link DWL-6700AP Quick Install Guide
ENGLISH
ComputerDWL-6700AP
Unied Wireless Switch
or
Wireless Controller
Mounting Options
Pole mount is the only option for the DWL-6700AP.
Cable Requirement
Use a Cat 5 cable with an even sheath.
The Ethernet ports on the DWL-6700AP access
point cannot accept a Cat 5 cable that has an
uneven sheath; the RJ-45 connector on the cable
will not fit properly into the receptacle on the access
point.
Warning: The DWL-6700AP is designed to receive
PoE power only from the proprietary PoE adapter
(24 V/1 A) included with the DWL-6700AP. The
DWL-6700AP is NOT an 802.3af-compliant device.
Connecting an access point to a Power over
Ethernet (PoE) device that is not approved by
D-Link can damage the equipment.
• Manage the access point from the computer
via the Unied Wireless Switch or Wireless
Controller: Connect the access point to a
Unied Wireless Switch or Wireless Controller.
Connect your computer to the same network
as that of the Unied Wireless Switch or
Wireless Controller.
Pole Mounting Installation
1. Open the bottom panel with a Hex screwdriver
(T8).
2. Plug the one end of Cat 5 cable into the
LAN1 or LAN2 port on DWL-6700AP, and the
other end to the port labeled POE on the PoE
Adapter.
3. Choose a gasket (6 mm or 4 mm) to t the
Ethernet cable; if LAN2 is not in-use, please
take off the black gasket.
4. Close the bottom panel with a Hex screwdriver
(T8).
Installation
ComputerDWL-6700AP
D-Link DWL-6700AP Quick Install Guide 5
ENGLISH
5. (Optional) Attach a grounding wire.
6. Attach access point to a pole
7. Fasten the mounting ties.
Andere Handbücher für DWL-6700AP
1
Inhaltsverzeichnis
Andere D-Link Drahtloser Zugangspunkt Handbücher
D-Link
D-Link DAP-2553 - Wireless N Dual Band Gigabit Access... Bedienungsanleitung
D-Link
D-Link DAP-3666 Bedienungsanleitung
D-Link
D-Link DBA-1510P Bedienungsanleitung
D-Link
D-Link DAP-1150 Bedienungsanleitung
D-Link
D-Link xtreme n duo dap-1522 Bedienungsanleitung
D-Link
D-Link DAP-2553 - Wireless N Dual Band Gigabit Access... Bedienungsanleitung
D-Link
D-Link DWL-1000AP Bedienungsanleitung
D-Link
D-Link DWP-1010 Bedienungsanleitung
D-Link
D-Link DWL-8220AP - AirPremier Wireless Switch Dualband Access... Bedienungsanleitung
D-Link
D-Link DAP-3320 Bedienungsanleitung
D-Link
D-Link DAP-3315 Bedienungsanleitung
D-Link
D-Link DAP-2553 - Wireless N Dual Band Gigabit Access... Bedienungsanleitung
D-Link
D-Link AirPremier N DAP-2360 Bedienungsanleitung
D-Link
D-Link AirPlus DWL-900AP+ Bedienungsanleitung
D-Link
D-Link DWL-2200AP - AirPremier - Wireless Access... Bedienungsanleitung
D-Link
D-Link DWL-7200AP - AirPremier AG - Wireless Access... Bedienungsanleitung
D-Link
D-Link DAP-1360 Bedienungsanleitung
D-Link
D-Link AirPlus Xtreme G DWL-2000AP Bedienungsanleitung
D-Link
D-Link AirPremier N DAP-3690 Bedienungsanleitung
D-Link
D-Link Rangebooster N 650 Access Point DAP-1353 Bedienungsanleitung
