D-MAX 650 TVL Bedienungsanleitung

High Resolution / Day&Night

COLOR BOX CAMERA

사용 설명서

용서

650TVL

MANUAL

The lightning flash with an arrowhead symbol, within an equilateral

triangle is intended to alert the user to the presence of uninsulated

dangerous voltage within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

INFORMATION - This equipment has been tested and found to comply with limits for a

Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own expense.

WARNING - Changes or modifications not expressly approved by the

manufacturer could void the user’s authority to operate the equipment.

CAUTION : To prevent electric shock and risk of fire hazards:

Do NOT use power sources other than that specified.

Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and should conform to all

local codes

The camera needs periodic inspection.

Contact an authorized technician for inspection.

Stop using your camera when you find a malfunction.

If you use your camera around smoke or unusual heat for a long time,

fire may be caused.

Do not Install the camera on a surface that can not support it.

Unless the surface is suitable, it could cause falling or other hazards.

Do not hold plug with wet hands.

It could cause an electric shock.

Do not disassemble the camera.

It may result in fire, electric shock or other hazards.

Do not use the camera close to a gas or oil leak.

It may result in fire or other hazards.

■ Warning

1.Features

---------------------------------

2. Components

---------------------------------

3. Names and functions of parts

---------------------------------

4. Installation

---------------------------------

5. Setup Menu Operation

---------------------------------

6. Troubleshooting

---------------------------------

7. Specifications

---------------------------------

■Contents

☺Horizontal Resolution 650 TVLines

Clear image quality has been achieved by employing a SONY CCD with 410,000

pixels, which provides a horizontal resolution of 620 TV lines.

☺DAY & NIGHT

This camera has a function that automatically selects the mode that is appropriate for

daytime or night-time conditions The COLOR mode operates in daytime conditions to

provide optimum colors, and BW mode operates in nighttime conditions to enhance the

definition of the image.

☺Electronic IRIS

The electronic IRIS function enables continuous automatic control of the shutter between

1/60~1/120,000 seconds.

☺White Defect restoration

When the camera has white defect in the CCD with ages, User can restore it using OSD

menu.

☺PRIVACY Function

The PRIVACY function conceals the areas you do not wish to appear on the screen.

☺High Sensitivity

The built-in high sensitivity SONY COLOR CCD enables a clear image even in

0.1Lux

☺Controlled by OSD Menu

The camera can be controlled by selecting text displayed on the monitor screen.

☺Additional Functions

MOTION DETECTION, MIRROR, SHARPNESS functions are also available.

1. Features

COLOR CAMERA

-------------

AUTO IRIS LENS CONNECTION

PLUG

-------------

C-MOUNT ADAPTOR

-------------

L-WRENCH

-------------

MANUAL

-------------

2. Components

1) Front

① Lens protection cap

Please cover the lens when not using it.

② CS-Mount lens adaptor

Please attach the CS-Mount lens here.

③ Back Focus clamp screw

Please loosen the clamp screw with a screwdriver before adjusting the Back Focal

length.

☞Mounting bracket screw hole

Please use the screw hole when fixing the

camera onto the mounting bracket. Please use

the clamp screw as specified picture.

☞The mounting bracket can be separated and attached to the top of the camera.

In this instance please do not tighten the screw to a depth of more than 5mm,

otherwise serious damage can occur to the inside of the camera.

3. Names and Functions of Parts

2) Back

⑥

① Auto iris lens connector

This is the connection terminal for the auto iris lens.

② Video output terminal

Sends video signals and connects to the video input terminal of the monitor.

③ Power lamp

Lights up when the correct power is supplied to the camera.

④ Setting button

SETUP button : Used for the menu display. This button can be used to confirm

settings after changing the value of the selected function or current conditions.

UP & DOWN buttons : Used for selecting items by moving the cursor up or down on

the menu screen.

LEFT & RIGHT buttons : Used when changing item values, by moving the cursor to

the left or right on the menu screen.

⑤ Power input terminal

Connects to the power appropriate to each power requirement.

⑥Auto Iris Switch

Video or DC

☞Make sure that user can’t use video type lens using high voltage camera.

1) Lens

Lenses are sold separately. Lenses such as auto iris lens, CS-Mount lens and C-Mount

lens can be used.

Note)

• Use of the DC auto iris lens is recommended to achieve the best results for operating this

product effectively.

• Please keep the lens clean.

• Any foreign objects and finger marks on the lens can cause inferior image quality in low

light level conditions.

①When using an auto iris lens

- Please peel off about 8mm of the outer skin of the auto iris lens cable.

- Please peel off about 2mm of the outer skin of the insulated conductor inside the

lens cable

- Please remove the cover of the auto iris lens connection plug and solder the lens

cable to the connector pin in the plug.

4. Installation

Pin No. LENS

DC VIDEO

No.1 Pin Damping- Red(power)

No.2 Pin Damping+ NC

No.3 Pin Drive+ White(video signal)

No.4 Pin Drive- Black(GND)

- Please replace the auto iris lens connection plug cover and take off the lens

protection cap, and then attach the auto iris lens to the camera by screwing it in

clockwise.

- Please insert the connection plug that is connected to the auto iris lens cable into

the auto lens connector, which is located on the back of the camera

- Please set the lens selection switch, located on the back of the camera, to DC or

VIDEO depending on the type of auto iris lens which is being used.

Inhaltsverzeichnis

Andere D-MAX Sicherheitskamera Handbücher

D-MAX

D-MAX DCC-580D Series Bedienungsanleitung

D-MAX

D-MAX DCC-500DV Bedienungsanleitung

D-MAX

D-MAX DCC-500D Bedienungsanleitung

D-MAX

D-MAX DMS-200 Bedienungsanleitung

D-MAX

D-MAX DHC-10SITA Bedienungsanleitung

D-MAX

D-MAX DMC-20SEC Bedienungsanleitung

D-MAX

D-MAX DCC-520D series Bedienungsanleitung

D-MAX

D-MAX DCC-520DV Bedienungsanleitung

D-MAX

D-MAX DIC-7030DV Bedienungsanleitung

D-MAX

D-MAX DCC-501DV Bedienungsanleitung

D-MAX

D-MAX DMS-200 Bedienungsanleitung

D-MAX

D-MAX 600 TVL Bedienungsanleitung

D-MAX

D-MAX DCC-500F Bedienungsanleitung

D-MAX

D-MAX DMC Series Bedienungsanleitung

D-MAX

D-MAX 680 TVL Bedienungsanleitung

D-MAX

D-MAX DCC-600F Bedienungsanleitung

D-MAX

D-MAX Pixim Seawolf DSP Bedienungsanleitung

D-MAX

D-MAX DSC-300SE Bedienungsanleitung

D-MAX

D-MAX DCC-601DV Bedienungsanleitung

D-MAX

D-MAX DCC-528DV Bedienungsanleitung

D-MAX

D-MAX DWC-540PV Bedienungsanleitung

D-MAX

D-MAX DSC-737SE Bedienungsanleitung

D-MAX

D-MAX DSC-230SI Bedienungsanleitung

D-MAX

D-MAX DSC-2000Si Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung