Dahua Technology DH-IPC-HFW4X-W Bedienungsanleitung

Bullet Wi-Fi Camera

Quick Start Guide

V1.0.0

ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.

Quick Start Guide

Foreword

General

This manual introduces the functions, installation, and operations of the camera.

Safety Instructions

The following categorized signal words with defined meaning might appear in the manual.

Signal Words

Meaning

WARNING

Indicates a medium or low potential hazard which, if not avoided,

could result in slight or moderate injury.

CAUTION

Indicates a potential risk which, if not avoided, could result in

property damage, data loss, lower performance, or unpredictable

result.

NOTE

Provides additional information as the emphasis and supplement

to the text.

Revision History

Version

Revision Content

Release Time

V1.0.0

First release.

March 2020

About the Manual

⚫The Manual is for reference only. If there is inconsistency between the manual and the

actual product, the actual product shall prevail.

⚫We are not liable for any loss caused by the operations that do not comply with the manual.

⚫The manual would be updated according to the latest laws and regulations of related

regions. For detailed information, see the paper manual, QR code or our official website. If

there is inconsistency between paper manual and the electronic version, the electronic

version shall prevail.

⚫All the designs and software are subject to change without prior written notice. The product

updates might cause some differences between the actual product and the manual. Please

contact the customer service for the latest program and supplementary documentation.

⚫There still might be deviation in technical data, functions and operations description, or

errors in print. If there is any doubt or dispute, please refer to our final explanation.

⚫Upgrade the reader software or try other mainstream reader software if the manual (in PDF

format) cannot be opened.

⚫All trademarks, registered trademarks and the company names in the manual are the

properties of their respective owners.

⚫Please visit our website, contact the supplier or customer service if there is any problem

Quick Start Guide

occurred when using the device.

⚫If there is any uncertainty or controversy, please refer to our final explanation.

Quick Start Guide

III

Important Safeguards and Warnings

Electrical Safety

⚫All installation and operation shall conform to your local electrical safety codes.

⚫The power source shall conform to the Safety Extra Low Voltage (SELV) standard, and supply

power with rated voltage which conforms to Limited power Source requirement according to

IEC60950-1. Note that the power supply requirement is subject to the device label.

⚫Make sure that the power supply is correct before operating the device.

⚫A readily accessible disconnecting device shall be incorporated in the building installation

wiring.

⚫Prevent the power cable from being trampled or pressed, especially the plug, power socket and

the junction extruded from the device.

Environment

⚫Do not aim the device at strong light to focus, such as lamp light and sun light; otherwise it

might cause over brightness or light marks, which are not the device malfunction, and affect the

longevity of Complementary Metal-Oxide Semiconductor (CMOS).

⚫Do not place the device in a damp, dusty extremely hot or cold environment, or the locations

with strong electromagnetic radiation or unstable lighting.

⚫Keep the device away from any liquid to avoid damage to the internal components.

⚫Keep the indoor device away from rain or damp to avoid fire or lightning.

⚫Keep sound ventilation to avoid heat accumulation.

⚫Transport, use and store the device within the range of allowed humidity and temperature.

⚫Heavy stress, violent vibration or water splash are not allowed during transportation, storage

and installation.

⚫Pack the device with standard factory packaging or the equivalent material when transporting

the device.

⚫Install the device in the location where only the professional staff with relevant knowledge of

safety guards and warnings can access. The accidental injury might happen to the

non-professionals who enter the installation area when the device is operating normally.

Operation and Daily Maintenance

⚫Do not touch the heat dissipation component of the device to avoid scald.

⚫Carefully follow the instructions in the manual when performing any disassembly operation

about the device; otherwise, it might cause water leakage or poor image quality due to

unprofessional disassembly. Please contact after-sale service for desiccant replacement if

there is condensed fog on the lens after unpacking or when the desiccant turns green. (Not all

models are included with the desiccant).

⚫It is recommended to use the device together with lightning arrester to improve lightning

protection effect.

Quick Start Guide

⚫It is recommended to ground the device to enhance reliability.

⚫Do not touch the image sensor (CMOS) directly. Dust and dirt can be removed with air blower,

or you can wipe the lens gently with soft cloth that is moistened with alcohol.

⚫You can clean the device body with soft dry cloth, and for stubborn stains, use the cloth with

mild detergent. To avoid possible damage on device body coating which could cause

performance decrease, do not use volatile solvent such as alcohol, benzene, diluent to clean

the device body, nor can strong, abrasive detergent be used.

⚫Dome cover is an optical component. Do not touch or wipe the cover with your hands directly

during installation or operation. For removing dust, grease or fingerprints, wipe gently with

moistened oil-free cotton with diethyl or moisten soft cloth. You can also remove dust with an air

blower.

⚫Strengthen the protection of network, device data and personal information by adopting

measures which include but not limited to using strong password, modifying password regularly,

upgrading firmware to the latest version, and isolating computer network. For some devices

with old firmware versions, the ONVIF password will not be modified automatically along with

the modification of the system password, and you need to upgrade the firmware or manually

update the ONVIF password.

⚫Use standard components or accessories provided by manufacturer and make sure that the

device is installed and maintained by professional engineers.

⚫The surface of the image sensor should not be exposed to laser beam radiation in an

environment where a laser beam device is used.

⚫Do not provide two or more power supply sources for the device unless otherwise specified. A

failure to follow this instruction might cause damage to the device.

Quick Start Guide 
V
Table of Contents 
Foreword .................................................................................................................................................... I
Important Safeguards and Warnings .................................................................................................... III 
1 Cable....................................................................................................................................................... 1
2 Network Configuration.......................................................................................................................... 2
 Initializing Device .......................................................................................................................... 2
 Modifying Device IP Address ........................................................................................................ 3
 Logging in to Web Interface.......................................................................................................... 4
3 Installation.............................................................................................................................................. 6
 Packing List................................................................................................................................... 6
 Dimensions ................................................................................................................................... 6
 Installing Device............................................................................................................................ 7
3.3.1 Installation Type.................................................................................................................. 7
3.3.2 Installing Antenna ............................................................................................................... 7
3.3.3 Installing SD Card (Optional).............................................................................................. 7
3.3.4 Attaching Device................................................................................................................. 7
3.3.5 Installing Waterproof Connector (Optional) ........................................................................ 9
3.3.6 Adjusting Lens Angle .........................................................................................................11 

Quick Start Guide

1 Cable

Waterproof all the cable joints with insulating tape and waterproof tape to avoid short circuit and

water damage. For the detailed operation, see the FAQ Manual.

Cable list

For more information about cable ports, see Table 1-1.

Table 1-1 Cable information

No.

Port Name

Description

Ethernet

Connects to network with network cable.

12V DC

power input

Inputs 12V DC power. Be sure to supply power as instructed in the

manual.

Device abnormity or damage could occur if power is not supplied

correctly.

Quick Start Guide

2 Network Configuration

Device initialization and IP address setting can be finished with the "ConfigTool" or on web

interface.

⚫Device initialization is required at first use or after the device being reset.

⚫Device initialization is available only when the IP addresses of the device (192.168.1.108

by default) and the PC stay in the same network segment.

⚫Plan useable network segment properly to connect the device to the network.

⚫The following figures and interfaces are for reference only, and the actual product shall

prevail.

Initializing Device

Double-click "ConfigTool.exe" to open the tool.

Click .

The Modify IP interface is displayed. See Figure 2-1.

Modify IP

Click Search setting.

The Setting interface is displayed.

Enter the start IP address and end IP address of the network segment in which you

want to search devices, and then click OK.

All the devices found in the network segment are listed.

Select one or several devices whose Status is Uninitialized, and then click Initialize.

The Device initialization interface is displayed.

Quick Start Guide

Select the devices that need initialization, and then click Initialize.

The password setting interface is displayed. See Figure 2-2.

Password setting

Set and confirm the password of the devices, then enter a valid email address, and

then click Next.

The final setting interface is displayed.

Password can be modified or reset in System Settings.

Select the options according to your needs, and then click OK.

The Initialization interface is displayed after initialization is completed. Click the

success icon ( ) or the failure icon ( ) for the details.

Click Finish.

The device status in the Modify IP interface (Figure 2-1) turns to Initialized.

Modifying Device IP Address

⚫You can modify IP address of one or multiple devices in one time. This section is based on

modifying IP addresses in batches.

⚫Modifying IP addresses in batches is available only when the corresponding devices have

the same login password.

Do Step 1 to Step 4 in "2.1 Initializing Device" to search for devices in your network

segment.

After clicking Search setting, enter the username and password, and make sure that

they are the same as what you set during initialization; otherwise there will be wrong

password notice.

Quick Start Guide

Select the devices whose IP addresses need to be modified, and then click Modify IP.

The Modify IP Address interface is displayed. See Figure 2-3.

Modify IP Address

Select Static mode, and then enter start IP, subnet mask, and gateway.

⚫IP addresses of multiple devices will be set to the same if you select the Same IP

check box.

⚫If DHCP server is available in the network, devices will automatically obtain IP

addresses from DHCP server when you select DHCP.

Click OK.

Logging in to Web Interface

Open IE browser, enter the IP address of the device in the address bar, and then press

Enter key.

If the setup wizard is displayed, finish the settings as instructed.

Enter the user name and password in the login box, and then click Login.

For the first-time login, click Click Here to Download Plugin, and then install the

plugin as instructed.

The main interface is displayed when the installation is finished. See Figure 2-4.

Inhaltsverzeichnis

Andere Dahua Technology Sicherheitskamera Handbücher

Dahua Technology

Dahua Technology ANPR Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-EBW81242-AS-S2 Bedienungsanleitung

Dahua Technology

Dahua Technology 52C230UNI Bedienungsanleitung

Dahua Technology

Dahua Technology DH-IPC-HFW3849T1P-AS-PV-S3-BLK Bedienungsanleitung

Dahua Technology

Dahua Technology N65CB5Z Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HDBW1531E-S-0280B Bedienungsanleitung

Dahua Technology

Dahua Technology DH-IPC-HFW11A0SN-W Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HDW2241T-S-0280B Bedienungsanleitung

Dahua Technology

Dahua Technology 22204TNI Bedienungsanleitung

Dahua Technology

Dahua Technology IR Eyeball Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HUM4231S-L4-0280B-S3 Bedienungsanleitung

Dahua Technology

Dahua Technology N82AL32 Bedienungsanleitung

Dahua Technology

Dahua Technology EZ-IP BULLET Bedienungsanleitung

Dahua Technology

Dahua Technology D-TPC-BF1241-B3F4-DW-S2 Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HDW1239DT-PV-STW Bedienungsanleitung

Dahua Technology

Dahua Technology 6CE230UNI Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HUM8531M-V-LED-0360B Bedienungsanleitung

Dahua Technology

Dahua Technology D-IPC-HDBW3441F-AS-M-0360B Bedienungsanleitung

Dahua Technology

Dahua Technology A42AR2 Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HFW2431DG-4G Bedienungsanleitung

Dahua Technology

Dahua Technology DSS4004-S2 Allgemeine Anweisungen

Dahua Technology

Dahua Technology HFW5241E-ZE Bedienungsanleitung

Dahua Technology

Dahua Technology EOL Series Bedienungsanleitung

Dahua Technology

Dahua Technology N55BS5 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung