Dahua Technology IPC-EBW81242-AS-S2 Bedienungsanleitung

Panoramic Fisheye Network Camera

Quick Start Guide

V1.0.

0ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.

Quick Start Guide

Foreword

General

This manual introduces the functions, installation and operations of the camera.

Safety Instructions

The following categorized signal words with defined meaning might appear in the manual.

Signal Words Meaning

WARNING

Indicates a medium or low potential hazard which, if not avoided,

could result in slight or moderate injury.

CAUTION

Indicates a potential risk which, if not avoided, could result in

property damage, data loss, lower performance, or unpredictable

result.

NOTE Provides additional information as supplement to the text.

Revision History

Version Revision Content Release Date

V1.0.0 First release. November, 2021

Privacy Protection Notice

As the device user or data controller, you might collect the personal data of others such as their face,

fingerprints, and license plate number. You need to be in compliance with your local privacy

protection laws and regulations to protect the legitimate rights and interests of other people by

implementing measures which include but are not limited: Providing clear and visible identification

to inform people of the existence of the surveillance area and provide required contact information.

About the Manual

The manual is for reference only. Slight differences might be found between the manual and the

product.

We are not liable for losses incurred due to operating of the product in ways that are not in

compliance with the manual.

The manual will be updated according to the latest laws and regulations of related jurisdictions.

For detailed information, see the paper User Manual, use our CD-ROM, scan the QR code or visit

our official website. The manual is for reference only. Slight differences might be found between

the electronic version and the paper version.

All the designs and software are subject to change without prior written notice. Product

updates might result in some differences appearing between the actual product and the

Quick Start Guide

manual. Please contact customer service for the latest program and supplementary

documentation.

There might be deviations in the description of the technical data, functions and operations, or

errors in the print. If there is any doubt or dispute, we reserve the right of final explanation.

Upgrade the reader software or try other mainstream reader software if the manual (in PDF

format) cannot be opened.

All trademarks, registered trademarks and the company names in the manual are the properties

of their respective owners.

Please visit our website, contact the supplier or customer service if any problems occur while

using the device.

If there is any uncertainty or controversy, we reserve the right of final explanation.

Quick Start Guide

III

Important Safeguards and Warnings

Electrical safety

All installation and operation should conform to your local electrical safety codes.

The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no

higher than PS2. Note that the power supply requirements are subject to the device label.

Make sure the power supply is correct before operating the device.

A readily accessible disconnect device shall be incorporated in the building installation wiring.

Prevent the power cable from being trampled or pressed, especially the plug, power socket and

the junction extruded from the device.

Environment

Do not aim the device at strong light to focus, such as lamp light and sun light; otherwise it

might cause over brightness or light marks, which are not the device malfunction, and affect the

longevity of Complementary Metal-Oxide Semiconductor (CMOS).

Do not place the device in a damp or dusty environment, extremely hot or cold temperatures, or

the locations with strong electromagnetic radiation or unstable lighting.

Keep the device away from any liquid to avoid damage to the internal components.

Keep the indoor device away from rain or damp to avoid fire or lightning.

Keep sound ventilation to avoid heat accumulation.

Transport, use and store the device within the range of allowed humidity and temperature.

Heavy stress, violent vibration or water splash are not allowed during transportation, storage

and installation.

Pack the device with standard factory packaging or the equivalent material when transporting

the device.

Install the device in the location where only the professional staff with relevant knowledge of

safety guards and warnings can access. The accidental injury might happen to the

non-professionals who enter the installation area when the device is operating normally.

Operation and Daily Maintenance

Do not touch the heat dissipation component of the device to avoid scald.

Carefully follow the instructions in the manual when disassembling operation about the device;

otherwise, it might cause water leakage or poor image quality due to unprofessional operations.

Make sure that the gasket ring is flat and properly installed in the groove before installing the

cover. Contact after-sales service for desiccant replacement if there is condensed fog on the lens

after unpacking or when the desiccant turns green (Not all models are included with the

desiccant).

We recommend using the device together with lightning arrester to improve lightning

protection effect.

We recommend grounding the device to enhance reliability.

Quick Start Guide

Do not touch the image sensor (CMOS) directly. Dust and dirt could be removed with air blower,

or you can wipe the lens gently with soft cloth that is moistened with alcohol.

You can clean the device body with soft dry cloth, and for stubborn stains, use the cloth with

mild detergent. To avoid possible damage on device body coating which could cause

performance decrease, do not use volatile solvent such as alcohol, benzene, diluent to clean the

device body, nor can strong, abrasive detergent be used.

Dome cover is an optical component. Do not touch or wipe the cover with your hands directly

during installation or operation. For removing dust, grease or fingerprints, wipe gently with

moistened oil-free cotton with diethyl or moistened soft cloth. You can also remove dust with an

air blower.

WARNING

Please strengthen the protection of network, device data and personal information by adopting

measures which include but not limited to using strong password, changing password regularly,

upgrading firmware to the latest version, and isolating computer network. For some device with

old firmware versions, the ONVIF password will not be modified automatically along with the

modification of the system password, and you need to upgrade the firmware or manually

update the ONVIF password.

Use standard components or accessories provided by manufacturer and make sure the device is

installed and maintained by professional engineers.

The surface of the image sensor should not be exposed to laser beam radiation in an

environment where a laser beam device is used.

Do not provide two or more power supply sources for the device unless otherwise specified. A

failure to follow this instruction might cause damage to the device.

Quick Start Guide

Table of Contents

Foreword............................................................................................................................................................ I

Important Safeguards and Warnings............................................................................................................. III

1 Introduction................................................................................................................................................... 1

Cable ............................................................................................................................................................................................... 11.1

Connecting Alarm Input/output .......................................................................................................................................... 21.2

2 Network Configuration ................................................................................................................................. 4

Initializing Device....................................................................................................................................................................... 42.1

Changing Device IP Address.................................................................................................................................................. 62.2

Logging in Web Page................................................................................................................................................................ 72.3

3 Installation..................................................................................................................................................... 8

Packing List................................................................................................................................................................................... 83.1

Dimension..................................................................................................................................................................................... 83.2

Installing Device ......................................................................................................................................................................... 93.3

3.3.1 Installation Method...................................................................................................................................................... 9

3.3.2 Installing SD Card (Optional) ..................................................................................................................................10

3.3.3 Attaching Device.........................................................................................................................................................10

3.3.4 Installing Waterproof Connector...........................................................................................................................14

Quick Start Guide

1Introduction

Cable1.1

Waterproof all the cable joints with insulating tape and waterproof tape to avoid short circuit and

water damage. For detailed operation, see FAQ manual.

CablesFigure 1-1

Table 1-1 Cable information

No. Port Name Description

1 Power input Inputs 12 VDC power. Please be sure to supply power as instructed in the

Guide.

Device abnormity or damage could occur if power is not supplied

correctly.

Quick Start Guide

No. Port Name Description

2 Ethernet Port Connects to network with network cable.

Provides power to the device with PoE.

PoE is available on select model.

3 Audio input Connects to sound-pick-up device to receive audio signal.

4 Audio output Connects to speaker to output audio signal.

5 Alarm I/O Includes alarm signal input and output ports, the number of I/O ports

Might vary on different devices. For detailed information, see

Table 1-2.

Table 1-2 Alarm I/O port information

Port name No. Connector name Description

I/O port

1 ALARM_OUT1 Alarm output port 1 outputs alarm signal to alarm

device.

When connecting to alarm device, only the

ALARM_OUT 1 port and ALARM_OUT_GND 1 port

with the same number can be used together.

2 ALM_OUT_GND1

3 ALARM_IN1 Alarm input port 1 receives the switch signal of

external alarm source.

4 ALARM_IN2 Alarm input port 2 receives the switch signal of

external alarm source.

5 ALM_IN_GND Alarm input GND.

6 ALARM_OUT2 Alarm output port 2 outputs alarm signal to alarm

device.

When connecting to alarm device, only the

ALARM_OUT 2 port and ALARM_OUT_GND 2 port

with the same number can be used together.

7 ALM_OUT_GND2

Connecting Alarm Input/output1.2

Alarm input/output is available on select models.

Connect alarm input device to the alarm input end of the I/O port.Step 1

Device collects different states of alarm input port when the input signal is idling and being

grounded. Device collects logic "1" when input signal connecting to 3.3 V or idling; device

collects logic "0" when input signal being grounded.

Quick Start Guide

Alarm inputFigure 1-2

Connect alarm output device to the alarm output end of the I/O port. The alarm output isStep 2

relay switch output, which can only connect to NO alarm devices.

The ALARM_OUT port and the ALM_OUT_GND port with the same number constitute a

switch for alarm output.

The switch is open normally and closes when there is alarm output.

Alarm outputFigure 1-3

The alarm input on the web page is corresponding to the alarm input end of the I/O

port. There will be high level and low level alarm signal generated by the alarm input

device when alarm occurs, set the input mode to "NO" (default) if the alarm input signal

is logic "0" and to "NC" if the alarm input signal is logic "1".

The alarm output in the web page is corresponding to the alarm output end of the

device, which is also the alarm output end of the I/O port.

Quick Start Guide

2Network Configuration

Device initialization and IP setting can be finished with the ConfigTool or in web page. For more

information, see web operation manual.

Device initialization is available on select models, and it is required at first use and after device is

being reset.

Device initialization is available only when the IP addresses of the device (192.168.1.108 by

default) and the PC stays in the same network segment.

Planning useable network segment properly to connect the device to the network.

The following figures and interfaces are for reference only.

Initializing Device2.1

Double-click ConfigTool.exe to open the tool.Step 1

Click .Step 2

Click Search Setting.Step 3

SettingFigure 2-1

Select the searching way.Step 4

Current Segment Search (default)

Select the Current Segment Search checkbox. Enter the username in the Username

box and the password in the Password box. The system will search for devices

accordingly.

Other Segment Search

Select the Other Segment Search checkbox. Enter IP address in the Start IP box and

End IP box respectively. Enter username and password. The system will search for the

devices accordingly.

If you select the Current Segment Search checkbox and the Other Segment Search

checkbox together, the system searches for devices under both conditions.

Inhaltsverzeichnis

Andere Dahua Technology Sicherheitskamera Handbücher

Dahua Technology

Dahua Technology IPC-HFW3841E-AS-0280B-S2 Bedienungsanleitung

Dahua Technology

Dahua Technology EOL Series Bedienungsanleitung

Dahua Technology

Dahua Technology N42BD32 Bedienungsanleitung

Dahua Technology

Dahua Technology 49925TNI Bedienungsanleitung

Dahua Technology

Dahua Technology D-SD6C3432XB-HNR-AGQ-PV Bedienungsanleitung

Dahua Technology

Dahua Technology IR Eyeball Bedienungsanleitung

Dahua Technology

Dahua Technology EZ-IP BULLET Bedienungsanleitung

Dahua Technology

Dahua Technology D-TPC-BF1241-B3F4-DW-S2 Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-MBW4231-AS/M12 Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HDW3549H-ZAS-PV-27135 Bedienungsanleitung

Dahua Technology

Dahua Technology 8A840WANF Bedienungsanleitung

Dahua Technology

Dahua Technology DH-HAC-HUM1220GN-B Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HFW1320S-W Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HDW2241T-S-0280B Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HFW1239DQ-PV-STW Bedienungsanleitung

Dahua Technology

Dahua Technology Lite IPCHFW2231T-ZAS-S2 Bedienungsanleitung

Dahua Technology

Dahua Technology N43AJ52 Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HFW81230E-Z Bedienungsanleitung

Dahua Technology

Dahua Technology N82AL32 Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HFW5431E-Z Bedienungsanleitung

Dahua Technology

Dahua Technology WizMind IPC-PDBW82041-B360 Bedienungsanleitung

Dahua Technology

Dahua Technology HD IR Mini Bullet Bedienungsanleitung

Dahua Technology

Dahua Technology DH-IPC-HFW3 Bedienungsanleitung

Dahua Technology

Dahua Technology IPC-HFW2531T-ZS-S2 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung