Dahua A Bedienungsanleitung

HDCVI Eyeball Camera

User’s Manual

V1.0.0

Foreword I

Foreword

General

This user’s manual (hereinafter referred to be "the Manual") introduces the functions,

installation and operations of the camera.

Safety Instructions

The following categorized signal words with defined meaning might appear in the Manual.

Signal Words

Meaning

WARNING

Indicates a medium or low potential hazard which, if not avoided,

could result in slight or moderate injury.

CAUTION

Indicates a potential risk which, if not avoided, could result in

property damage, data loss, lower performance, or unpredictable

result.

TIPS

Provides methods to help you solve a problem or save you time.

NOTE

Provides additional information as the emphasis and supplement

to the text.

Revision History

Version

Revision Content

Release Date

V1.0.0

First release.

May 2019

Privacy Protection Notice

As the device user or data controller, you might collect personal data of others such as face,

fingerprints, car plate number, Email address, phone number, GPS and so on. You need to be

in compliance with the local privacy protection laws and regulations to protect the legitimate

rights and interests of other people by implementing measures include but not limited to:

providing clear and visible identification to inform data subject the existence of surveillance

area and providing related contact.

About the Manual

The Manual is for reference only. If there is inconsistency between the manual and the

actual product, the actual product shall prevail.

We are not liable for any loss caused by the operations that do not comply with the manual.

The manual would be updated according to the latest laws and regulations of related

Foreword II

regions. For detailed information, see the paper manual, CD-ROM, QR code or our official

website. If there is inconsistency between paper manual and the electronic version, the

electronic version shall prevail.

All the designs and software are subject to change without prior written notice. The product

updates might cause some differences between the actual product and the manual. Please

contact the customer service for the latest program and supplementary documentation.

There still might be deviation in technical data, functions and operations description, or

errors in print. If there is any doubt or dispute, please refer to our final explanation.

Upgrade the reader software or try other mainstream reader software if the manual (in PDF

format) cannot be opened.

All trademarks, registered trademarks and the company names in the manual are the

properties of their respective owners.

Please visit our website, contact the supplier or customer service if there is any problem

occurred when using the device.

If there is any uncertainty or controversy, please refer to our final explanation.

Important Safeguards and Warnings III

Important Safeguards and Warnings

Electrical Safety

All installation and operation should conform to your local electrical safety codes.

The power source shall conform to the requirement of the Safety Extra Low Voltage (SELV)

standard, and supply power with rated voltage which conforms to Limited power Source

requirement according to IEC60950-1. Please note that the power supply requirement is

subject to the device label.

A readily accessible disconnect device shall be incorporated in the building installation

wiring.

Make sure if the camera power adapter meets the camera operating voltage requirement

before powering up the device (The material and length of the power cable might influence

the device voltage).

Prevent the power cable from being trampled or pressed, especially the plug, power socket

and the junction extruded from the device.

We assume no liability or responsibility for all the fires or electrical shock caused by

improper handling or installation.

Environment

Do not aim the device at strong light to focus, such as lamp light and sun light.

Transport, use and store the device within the range of allowed humidity and temperature.

Keep the camera away from water or other liquid to avoid damages to the internal

components.

Keep sound ventilation to avoid heat accumulation.

Heavy stress, violent vibration or water splash are not allowed during transportation,

storage and installation.

Pack the device with standard factory packaging or the equivalent material when

transporting the device.

It is recommended to use the device together with lightning arrester to improve lightning

protection effect.

It is recommended to get the grounding holes to be grounded to enhance the reliability of

the device.

It is recommended to use qualified video transmission cable to improve video quality. It is

recommended to use RG59 coaxial cable or higher standard.

Important Safeguards and Warnings IV

Use standard components or accessories provided by manufacturer and make sure the

device is installed and maintained by professional engineers.

The surface of the image sensor should not be exposed to laser beam radiation in an

environment where a laser beam device is used.

Do not provide two or more power supply sources for the device; otherwise it might

damage the device.

When the camera is in the condition of PoC power supply, do not connect any other

devices between the camera and PoC XVR or PoC transceiver including UTC, Balun,

optical transceiver, distributor and convertor and so on; otherwise, the device might get

burned.

PoC power supply is with high voltage. Do not dismantle the device during normal

operation; otherwise it might cause danger to both device and users due to high voltage.

Table of Contents V

Table of Contents

Foreword.................................................................................................................................................... I

Important Safeguards and Warnings.................................................................................................... III

1 Introduction............................................................................................................................................ 1

General.......................................................................................................................................... 11.1 Features........................................................................................................................................ 11.2

2 Design..................................................................................................................................................... 2

Dimension..................................................................................................................................... 22.1 Cable............................................................................................................................................. 32.2

3 Installation.............................................................................................................................................. 5

4 General Configuration .......................................................................................................................... 9

Opening Main Menu...................................................................................................................... 94.1 Setting Audio Input...................................................................................................................... 104.2 Operating OSD Menu ..................................................................................................................114.3

5 Maintenance......................................................................................................................................... 13

Introduction 1

1 Introduction

General1.1

This series of products comply with the HDCVI standard and support the transmission of video

and control signal over coaxial cable. They produce video signal with megapixel resolution and

require XVR device that comply with the HDCVI standard to achieve high speed, long distance

and zero lag transmission of the signal. They are applicable to cover the high definition

monitoring needs for locations like financial center, telecom site, supermarket, hotel,

government, school and factory.

Features1.2

720p series support over 800 m real-time transmission of video and control signal from

RG59 cable; for 1080p to 4k series, the distance is 500 m.

For PoC cameras, 1080P series support 400 m power supply transmission, and 4MP series

support 300 m by RG59 cable.

Excellent low-light performance with IR or night vision technology.

Configure devices easily with OSD menu.

Support switching between HD/SD outputs.

IP67 rated.

Design 2

2 Design

Dimension2.1

Model A (mm [inch])Figure 2-1

Model B (mm [inch])Figure 2-2

Model C (mm [inch])Figure 2-3

Model D (mm [inch])Figure 2-4

Design 3

Model E (mm [inch])Figure 2-5

Cable2.2

Cable type might vary with different cameras, and the actual product shall prevail.

Cable port listFigure 2-6

For more information about cable ports, see Table 2-1; for the operation method of ⑥(DIP

switch), see Table 2-2.

Table 2-1 Cable port description

No.

Port Name

Function

Design 4

No.

Port Name

Function

①

12V DC

power input

Inputs 12V DC power. Please be sure to supply power as instructed in the

Manual.

Device abnormity or damage could occur if power is not supplied correctly.

②

12V DC or

24V AC

power input

Inputs 12V DC or 24V AC power. Please be sure to supply power as

instructed in the Manual.

Device abnormity or damage could occur if power is not supplied correctly.

③

Video output

Connects to XVR to output video signal.

For PoC cameras, it connects to XVR to output video signal and at the same

time supplies power to the camera.And this function is available only in the

HDCVI video output mode.

When the camera is in the condition of PoC power supply, do not

connect any other device between the camera and PoC XVR or PoC

transceiver including UTC, Balun, optical transceiver, distributor and

convertor and so on; otherwise, the device might get burned.

PoC power supply is with high voltage. Do not dismantle the device

during normal operation; otherwise it might cause danger to both device

and users due to high voltage.

④

Audio input

Connects to sound-pick-up devices to receive analog audio signal.

⑤

Power output

Supplies 12V DC power.

Ensure that power consumption of devices connected to this port is

below 2W.

Ensure that supply frequency of devices connected to this port is higher

than 1MHz, such as sound pick-up, temperature/humidity sensor and

other devices without power consumption change. It might cause image

flickering if this port is connected to devices with supply frequency less

than 1MHz, such as fan, Hall sensor, loudspeaker, motor and other

electromechanical devices with power consumption change.

⑥

DIP switch

Dial switches to change output mode. Switch up indicates "ON", and switch

down indicates "OFF."

Table 2-2 Operation of DIP switch

Switch1

Switch2

Output Mode

OFF

CVI

CVBS

OFF

AHD

OFF

TVI

Andere Handbücher für A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Dahua Sicherheitskamera Handbücher

Dahua

Dahua N42BJ62 Bedienungsanleitung

Dahua

Dahua TPC-SD8320 Bedienungsanleitung

Dahua

Dahua HFW2831S-S-S2 Bedienungsanleitung

Dahua

Dahua IPC-HF8232F-HDMI Bedienungsanleitung

Dahua

Dahua DH-IPC-HDBW4421EP-0280B Bedienungsanleitung

Dahua

Dahua HAC-HDW2231R-Z Bedienungsanleitung

Dahua

Dahua DH-SD1A Bedienungsanleitung

Dahua

Dahua DH-IPC-HDBW5442HN-ZHE Bedienungsanleitung

Dahua

Dahua IPC-HDBW8281-Z Bedienungsanleitung

Dahua

Dahua IPC-MBW4231-AS/M12 Bedienungsanleitung

Dahua

Dahua DH-IPC-HDBW11A0EN-W Bedienungsanleitung

Dahua

Dahua DH-IPC-HFW1120SP-W Bedienungsanleitung

Dahua

Dahua N65CL5Z Bedienungsanleitung

Dahua

Dahua IPC-PDBW82041N-B360 Bedienungsanleitung

Dahua

Dahua DH-IPC-MBW4231-AS Bedienungsanleitung

Dahua

Dahua K Series Bedienungsanleitung

Dahua

Dahua IPC-EBW81230 Installations- und Benutzerhandbuch

Dahua

Dahua N51BL22 Bedienungsanleitung

Dahua

Dahua DH-IPC-HDW8341X-3D Series Gebrauchsanweisung

Dahua

Dahua DH-IPC-HDB4X-W Bedienungsanleitung

Dahua

Dahua IPC-HUM8231-L3 Bedienungsanleitung

Dahua

Dahua DH-IPC-PFW8601N-H-A180 Bedienungsanleitung

Dahua

Dahua IPC-HDW3849H-AS-PV-0280B Bedienungsanleitung

Dahua

Dahua DH-HAC-EB2401 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung