Daikin BRP072B42 Bedienungsanleitung
Wireless LAN Connecting Adapter
[BRP072B42]Installation Manual
1
Wireless LAN Connecting Adapter
[BRP072B42]Installation Manual
Check if the following accessories are included in your package.
Website:
http://www.daikinthai.com/wlan3/modbus
This set includes the following items:
Wireless LAN connecting adapter: 1 pc,
Serial number sticker (*1): 1 pc,
Screw (M3 × 8): 2 pcs.
Installation manual: 1 pc
This set includes the following items:
Holder: 1 pc,
Double face tape: 2 pcs,
Screw (M3 × 16): 2 pcs.
Wire harness assembly (*2): 1 pc
•For details on specifications, setting methods, FAQ, and the latest
version of this manual, see our website.
Accessories
Accessories
•Do not use the Wireless LAN connecting adapter for purposes other than wireless LAN
communication. Not accessible to Internet networks.
*1 •The serial number sticker is necessary for wireless connection settings.
Please keep it in a safe place.
*2 •Do not use extension or other wire harness assembly.
•Some models already have this wire harness assembly installed in the indoor unit.
AB
D
C
2
The protection of appliances marked with this symbol is ensured by double
insulation and does not require a safety connection to electrical earth (ground).
When installing:
Situations which could result in death
or serious injury.
WARNING
•The following describes the meanings of pictorial symbols used in this installation manual.
•To conduct a test run of the air conditioner, complete according to the installation manual for
the air conditioner unit.
Give this installation manual to the customer when installation is completed.
Prohibited Follow directions
Safety precautions
Safety precautions
Request installation by your dealer or a technician.
(Could cause electric shock or fire.)
Always use the accessories and specified parts for installation. Be sure to follow
the directions in this installation manual.
(Could cause the unit to fall, electric shock or fire.)
Electrical work must be performed in accordance with relevant local and national
regulations and with the instructions in this installation manual.
Always use a dedicated circuit.
(Could cause electric shock or fire.)
Always turn off the power supply when installing.
(Touching the electrical parts could cause an electric shock.) The main switch of
the installation is at the outdoor unit. Please switch off this main switch to turn off
the power supply.
3
Situations which could result in death or
serious injury.
WARNING
When using:
Do not disassemble, modify, or repair.
(Could cause fire, electric shock or injury.)
Do not handle the Wireless LAN connecting adapter with wet hands.
(Could cause electric shock or fire.)
Do not allow the Wireless LAN connecting adapter to get wet or use it when
bathing or similar activities using water.
(Could cause electric shock or fire.)
Do not use the Wireless LAN connecting adapter near medical equipment or
persons using cardiac pacemakers or defibrillators. The Wireless LAN connecting
adapter may cause life-threatening electromagnetic interference.
Do not use the Wireless LAN connecting adapter near auto-control equipment
such as automatic doors or fire alarm equipment.
(Could cause accidents due to erroneous equipment behavior.)
Immediately turn off the circuit breaker if there is abnormal odor or sound,
when it is overheating, or smoking.
(Could cause fire or malfunction.)
•Request an inspection by your dealer.
Turn off the circuit breaker if the Wireless LAN connecting adapter was dropped
or the case is damaged.
(Could cause fire or electric shock.)
•Request an inspection by your dealer.
Safety precautions
Safety precautions
4
Situations which could result in damage or
physical injury.
CAUTION
When installing:
Do not install where flammable gas leaks can occur.
(Could cause fire.)
Grip the connector when disconnecting the wire harness assembly from the outlet.
(Otherwise fire or electric shock can occur.)
Do not use where small children can get access.
(Could cause injuries.)
When using:
Do not use this product near a microwave oven.
(This can affect Wireless LAN communications.)
Safety precautions
Safety precautions
5
Wireless LAN connecting adapter
Wireless LAN connecting
adapter (External)
Main components
Main components
Basic parameters:
Frequency range:
Radio protocol:
RF channel:
Output power:
ERP:
Power supply:
2400 MHz–2483.5 MHz
IEEE 802.11b/g/n
1–13
0 dBm~18 dBm
17 dBm (11b) / 13 dBm (11g) / 12 dBm (11n)
DC 14 V / 100 mA
RF channel: Radio frequency channel
ERP: Effective radiated power
Applicable indoor units
For more details about installation of Wireless LAN connecting adapter
and applicable units visit http://www.daikinthai.com/wlan3/modbus
RUN lamp (orange)
lights when connecting to a router
(Wireless LAN access point).
AP lamp*
SETUP button
Use when connecting to a router
(Wireless LAN access point).
MODE button*
POWER button*
Installation type
Installation type
Wireless LAN connecting adapter
(the product is inside the indoor unit)
B
A
* No operation for BRP072B42 model.
6
Installation
Installation
Choose an installation site. (In the case of )
The Wireless LAN connecting adapter should be sited in a place where:
Attach the Wireless LAN connecting adapter to indoor unit.
Always turn off the power supply when installing.
(Touching the electrical parts could cause an electric shock.)
The main switch of the installation is at the outdoor unit.
WARNING
Installation
Work
1
2
•
The
Wireless LAN connecting
adapter is not in the path of direct sunlight.
•
The
Wireless LAN connecting
adapter is away from the source of heat or steam.
•
There is not source of machine oil vapour (this may shorten
the Wireless LAN connecting
adapter
life).
•
The
Wireless LAN connecting
adapter is at least 1 m away from any television or radio set
(The Wireless LAN connecting adapter may cause interference with the picture or sound).
•Distance between the indoor unit and the Wireless LAN connecting adapter is within length
of Wireless LAN cable.
Always turn off the power supply when installing.
(Touching the electrical parts could cause
an electric shock.)
Danger
•
If there is no white“S21” connector,
install aseparate printed circuit board
intothe indoor unit.
Connect the end of the connector
without the
wire harness
anchor.
Connector
Attach wire harness assembly to
indoor unit.
Remove the front grille of the indoor unit,
then connect the connector of wire harness assembly
to the white “S21” connector on the electrical wiring box.
• For instructions on how to remove the front grille or run the
wire harness assembly
into place,
see the installation manual of the particular air conditioner.
(
Wire harness assembly
can connect to
wire harness assembly
HA.)
D
Wire harness anchor
Wire harness
assembly
D
D
D
The steps to be followed depend on the installation type: type = External, type = Internal.
A B
A
In the case of A
D
7
Installation
Installation
Installation
Work
3
Remove the Wireless LAN connecting adapter case (upper).
Remove the upper case of the Wireless LAN connecting adapter.
Wireless LAN
connecting adapter
printed circuit board
Wireless LAN connecting
adapter case (upper)
Wireless LAN connecting
adapter case (lower)
Open the door Grab the
wire harness assembly
Binding band Insulation tube
Connector
(white)
D
•
Some models already have the wire harness assembly
installed in the indoor unit.
In such a case,
please proceed with the installation as below.
Remove the upper front panel from the indoor unit and open the door, grab the wire harness
assembly with your fingers and pull it out, then remove the binding band and pull the insulation
tube off the wire harness assembly.
• Refer to your air conditioner’s installation manual for details on removing the upper front panel.
In the case of B
(For both and .)
A B
8
Attach wire harness assembly to the Wireless LAN connecting
4
Installation
Installation
Installation
Work
Attach the
wire harness assembly
connector (white).
•
Fasten the wire harness assembly to the notch in the Wireless LAN connecting adapter case (lower).
Connect the connector to the same color.
Fasten the
wire harness assembly
and ensure that external force is not transmitted.
Connector (white)
Return the Wireless LAN connecting adapter case
to its original state. (For both and .)
Snap the top of the upper case unto the clip at the top of the lower case
and press to close the box.
5
Fix the upper Wireless LAN connecting adapter
case with 2 screws (M3 × 8) located in accessory set.
Wireless LAN connecting
adapter case (lower)
top portion clip
Wireless LAN connecting
adapter case (upper)
top portion clip
Check that the
wire harness assembly
is securely fastened.
adapter. (For both and .)
A B
A B
Inhaltsverzeichnis
Andere Daikin Adapter Handbücher
Daikin
Daikin BRP069A61 Anleitung zur Verwendung
Daikin
Daikin BRP069A41 Bedienungsanleitung
Daikin
Daikin EKMBPP1 Bedienungsanleitung
Daikin
Daikin BRP069A78 Anleitung zur Verwendung
Daikin
Daikin BRP069A61 Anleitung zur Verwendung
Daikin
Daikin BRP069A61 Bedienungsanleitung
Daikin
Daikin 4P359542-3S Bedienungsanleitung
Daikin
Daikin BRP069A61 Bedienungsanleitung
Daikin
Daikin BRP069B82 Bedienungsanleitung
Daikin
Daikin BRP072C42 Bedienungsanleitung
Daikin
Daikin 4P359542-4R Bedienungsanleitung
Daikin
Daikin BRP069C81 Bedienungsanleitung
Daikin
Daikin BRP069C41 Anleitung zur Verwendung
Daikin
Daikin BRP069C41 Bedienungsanleitung
Daikin
Daikin BRP084C42 Bedienungsanleitung
Daikin
Daikin 4P359542-1N Bedienungsanleitung
Daikin
Daikin BRP069A71 Anleitung zur Verwendung
Daikin
Daikin 4P359542-1S Bedienungsanleitung
Daikin
Daikin BRP069A71 Bedienungsanleitung
Daikin
Daikin BRP069C51 Anleitung zur Verwendung
