Daikin BRP072C42 Bedienungsanleitung

Wireless LAN Connecting Adapter

[BRP072C42]Installation Manual

English

ภาษาไทย

Bahasa

Tiếng Việt

中文

(繁體)

Indonesia

Contents

Safety precautions 2

Accessories 5

Main components 6

Installation 7

Conﬁguration 15

Troubleshooting 17

Website:

http://www.daikinthai.com/product/dmobile

•For details on speciﬁcations, setting methods, FAQ, and the latest

version of this manual, see our website.

The protection of appliances marked with this symbol is ensured by double

insulation and does not require a safety connection to electrical earth (ground).

When installing:

Situations which could result in death

or serious injury.

WARNING

•The following describes the meanings of pictorial symbols used in this installation manual.

•To conduct a test run of the air conditioner, complete according to the installation manual for

the air conditioner unit.

Give this installation manual to the customer when installation is completed.

Prohibited Follow directions

Safety precautions

 Request installation by your dealer or a technician.

(Could cause electric shock or ﬁre.)

 Always use the accessories and speciﬁed parts for installation. Be sure to follow

the directions in this installation manual.

(Could cause the unit to fall, electric shock or ﬁre.)

 Electrical work must be performed in accordance with relevant local and national

regulations and with the instructions in this installation manual.

Always use a dedicated circuit.

(Could cause electric shock or ﬁre.)

 Always turn off the power supply when installing.

(Touching the electrical parts could causeelectric shock.)

Please switch off the main switch to turn off the power supply.

Situations which could result in death or

serious injury.

WARNING

When using:



Do not disassemble, modify, or repair.

(Could cause ﬁre, electric shock or injury.)



Do not handle the Wireless LAN connecting adapter with wet hands.

(Could cause electric shock or ﬁre.)



Do not allow the Wireless LAN connecting adapter to get wet or use it when

bathing or similar activities using water.

(Could cause electric shock or ﬁre.)



Do not use the Wireless LAN connecting adapter near medical equipment or

persons using cardiac pacemakers or deﬁbrillators. The Wireless LAN connecting

adapter may cause life-threatening electromagnetic interference.



Do not use the Wireless LAN connecting adapter near auto-control equipment

such as automatic doors or ﬁre alarm equipment.

(Could cause accidents due to erroneous equipment behavior.)



Immediately turn off the circuit breaker if there is abnormal odor or sound,

when it is overheating, or smoking.

(Could cause ﬁre or malfunction.)

•Request an inspection by your dealer.



Turn off the circuit breaker if the Wireless LAN connecting adapter was dropped

or the case is damaged.

(Could cause ﬁre or electric shock.)

•Request an inspection by your dealer.

Safety precautions

Situations which could result in damage or

physical injury.

CAUTION

When installing:



Do not install where ﬂammable gas leaks can occur.

(Could cause ﬁre.)



Grip the connector when disconnecting the wire harness assembly from the outlet.

(Otherwise ﬁre or electric shock can occur.)



Do not use where small children can get access.

(Could cause injuries.)

When using:



Do not use this product near a microwave oven.

(This can affect Wireless LAN communications.)

Safety precautions

Check if the following accessories are included in your package.

This set includes the following items:

Wireless LAN connecting adapter: 1 pc,

Serial number sticker (*1): 1 pc,

Screw (M3 × 8): 2 pcs.

Installation manual: 1 pc

This set includes the following items:

Holder: 1 pc,

Double face tape: 2 pcs,

Screw (M3 × 16): 2 pcs.

Wire harness assembly (*2): 1 pc

(long wire)

Wire harness assembly (*2): 1 pc

(short wire)

Accessories

*1 •The serial number sticker is necessary for wireless connection settings.

Please keep it in a safe place.

*2 •Do not use extension or other wire harness assembly.

•Some models already have this wire harness assembly installed in the indoor unit.

For TYPE A

For TYPE B

Main components

Wireless LAN connecting adapter

Wireless LAN connecting

adapter (External)

Basic parameters:

Frequency range:

Radio protocol:

RF channel:

Power supply:

2400 MHz–2483.5 MHz

IEEE 802.11b/g/n

1–13

DC 14 V / 100 mA

RF channel: Radio frequency channel

Applicable indoor units

For the latest details about installation of Wireless LAN connecting adapter

and applicable units, visit http://www.daikinthai.com/product/dmobile

RUN lamp (orange)

lights when connecting to a router

(Wireless LAN access point).

AP lamp*

SETUP button

Use when connecting to a router

(Wireless LAN access point).

MODE button*

POWER button

Installation type

Wireless LAN connecting adapter

(the product is inside the indoor unit)

* No operation for BRP072C42 model.

Installation

Choose an installation site. (In the case of )

The Wireless LAN connecting adapter should be sited in a place where:

Attach the Wireless LAN connecting adapter to indoor unit.

Always turn off the power supply when installing.

(Touching the electrical parts could cause an electric shock.)

WARNING

Installation

Work

•

The

Wireless LAN connecting

adapter is not in the path of direct sunlight.

•

The

Wireless LAN connecting

adapter is away from the source of heat or steam.

•

There is not source of machine oil vapour (this may shorten

the Wireless LAN connecting

adapter

life).

•

The

Wireless LAN connecting

adapter is at least 1 m away from any television or radio set

(The Wireless LAN connecting adapter may cause interference with the picture or sound).

•Distance between the indoor unit and the Wireless LAN connecting adapter is within length

of Wireless LAN cable.

Always turn off the power supply when installing.

(Touching the electrical parts could cause

an electric shock.)

Danger

•

If there is no white“S21” connector,

install aseparate printed circuit board

intothe indoor unit.

Connect the end of the connector

without the

wire harness

anchor.

Connector

Attach wire harness assembly

(long wire) to indoor unit.

Remove the front grille of the indoor unit,

then connect the connector of wire harness assembly

to the white “S21” connector on the electrical wiring box.

• For instructions on how to remove the front grille or run the

wire harness assembly

into place,

see the installation manual of the particular air conditioner.

(Wire harness assembly can connect to HA connector S21.)

Wire harness anchor

Wire harness

assembly

The steps to be followed depend on the installation type: type = External, type = Internal.

A B

In the case of A



Installation

Work

Open the door Grab the

wire harness assembly

Binding band Insulation tube

Connector

(white)

•

Some models already have the wire harness assembly

installed in the indoor unit.

In such a case,

please proceed with the installation as below.

Remove the upper front panel from the indoor unit and open the door, grab the wire harness

assembly with your ﬁngers and pull it out, then remove the binding band and pull the insulation

tube off the wire harness assembly.

• Refer to your air conditioner’s installation manual for details on removing the upper front panel.

In the case of B



TYPE B1

TYPE B2 (Small casing) and B3 (Large casing)

Attach wire harness assembly (short wire) to indoor unit.

Remove the front grille of the indoor unit,

then connect the connector of wire harness assembly

to the white “S21” connector on the electrical wiring box.

• For instructions on how to remove the front grille or run the

wire harness assembly

into place,

see the installation manual of the particular air conditioner.

(

Wire harness assembly can connect to HA connector S21.

)

•

If there is no white“S21” connector,

install aseparate printed circuit board

intothe indoor unit.

Connect the end of the connector

without the

wire harness

anchor.

Connector

Inhaltsverzeichnis

Sprachen:

Andere Daikin Adapter Handbücher

Daikin

Daikin BRP069C51 Anleitung zur Verwendung

Daikin

Daikin BRP069A61 Anleitung zur Verwendung

Daikin

Daikin BRP069A71 Bedienungsanleitung

Daikin

Daikin 4P359542-3S Bedienungsanleitung

Daikin

Daikin DCM601A72 Bedienungsanleitung

Daikin

Daikin BRP069A61 Bedienungsanleitung

Daikin

Daikin BRP069B82 Bedienungsanleitung

Daikin

Daikin BRP069B41 Bedienungsanleitung

Daikin

Daikin BRP069C81 Bedienungsanleitung

Daikin

Daikin 4P359542-4R Bedienungsanleitung

Daikin

Daikin BRP069A41 Bedienungsanleitung

Daikin

Daikin 4P359542-1S Bedienungsanleitung

Daikin

Daikin BRP069A78 Anleitung zur Verwendung

Daikin

Daikin BRP084C42 Bedienungsanleitung

Daikin

Daikin BRP069A61 Bedienungsanleitung

Daikin

Daikin BRP072B42 Bedienungsanleitung

Daikin

Daikin EKMBPP1 Bedienungsanleitung

Daikin

Daikin 4P359542-1E Bedienungsanleitung

Daikin

Daikin BRP069C41 Anleitung zur Verwendung

Daikin

Daikin BRP069C51 Bedienungsanleitung

Daikin

Daikin BRP072C42-1 Bedienungsanleitung

Daikin

Daikin 4P359542-1N Bedienungsanleitung

Daikin

Daikin BRP069A61 Anleitung zur Verwendung

Daikin

Daikin BRP069C41 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung