Daikin EKRTR Bedienungsanleitung
INSTALLATION MANUAL
EKRTR
EKRTETS
Room thermostat
60
12534
87
170
161
28 50
±1.5 m
1.5 m
±1.5 m
12
3
45
>0.2 m
>0.2 m
>0.2 m
>0.2 m
3
1
2
4
5
EKRTR + EKRTETS
Room thermostat
4PW56105-1
Installation manual
1
The English text is the original instruction. Other languages are
translations of the original instructions.
Contents
1. Introduction ............................................................................ 2
2. Installation of EKRTETS as floor temperature sensor
(only for floor heating/cooling applications) ............................ 3
3. Installation of the EKRTR ....................................................... 6
4. Setting up codes in the installer menu ................................. 14
5. Technical characteristics ...................................................... 24
EKRTR
EKRTETS Room thermostat Installation manual
Read this manual attentively before starting up the unit.
Do not throw it away. Keep it in your files for future
reference.
Improper installation or attachment of equipment or
accessories could result in electric shock, short-circuit,
leaks, fire or other damage to the equipment. Be sure
only to use accessories made by Daikin which are
specifically designed for the use with the equipment and
have them installed by a professional.
If unsure of installation procedures or use, always
contact your dealer for advice and information.
Installation manual
2
EKRTR + EKRTETS
Room thermostat
4PW56105-1
1. Introduction
The room thermostat EKRTR can be used to control the Daikin
system (radiator heating and floor heating/cooling applications).
It is typically connected to the Daikin unit. Refer to the "Typical
application examples" in the Installation manual of the Daikin
unit.
■
In case of floor heating-only applications the room
thermostat can also be connected to the individual motorized
valve of the floor heating loop.
■
If a floor heating-only application is used in combination with
fan coil units each fan coil unit should have its dedicated fan
coil thermostat.
Optionally, an external temperature sensor EKRTETS can be
connected to the thermostat and used as:
■
external ambient temperature sensor to control the room
temperature (instead of the temperature sensor inside the
thermostat). In that case, install the temperature sensor
where you want to control the ambient temperature.
■
floor temperature sensor (only for floor heating/cooling
applications) to protect the floor temperature or to prevent
dew on the floor (in case of floor cooling). In that case, install
the temperature sensor in the floor (refer to "Installation of
EKRTETS as floor temperature sensor (only for floor
heating/cooling applications)" on page 3).
In case of extreme or sudden changes in weather
conditions, despite the dew prevention function,
condensation on the floor could occur.
To avoid reoccurrence, we suggest changing the
field settings (refer to "Set-up floor temperature
protection and dew prevention function (only for
floor heating/cooling applications)" on page 15.
In case the conditions are so extreme that this
countermeasure is not adequate, we suggest not
to use floor cooling.
EKRTR + EKRTETS
Room thermostat
4PW56105-1
Installation manual
3
2. Installation of EKRTETS as floor
temperature sensor (only for floor heating/
cooling applications)
As it should be integrated into the floor, the installation of the
temperature sensor EKRTETS should be planned and
performed in advance.
If EKRTETS is installed as floor temperature sensor, the
thermostat EKRTR should be wall-mounted. Refer to "Wall-
mounted installation" on page 6.
1
Take the installation suggestions for the thermostat into
account when selecting the installation location.
Refer to figure 3.
NOTE
The below procedure only serves as an example.
Your actual situation may differ from what is
represented here.
Installation manual
4
EKRTR + EKRTETS
Room thermostat
4PW56105-1
2
Integrate the EKRTETS temperature sensor in an electrical
conduit (
∅
16 mm maximum) in the floor construction as
shown below.
Make sure to seal the temperature sensor electrical conduit
to protect the thermostat from hot air currents and to allow
the replacement of the temperature sensor.
figure1
3
Pass the temperature sensor cable through the conduit until
it reaches the seal.
1
Thermostat
2
Temperature sensor conduit (Ø16 mm maximum)
3
Temperature sensor EKRTETS (in conduit with seal)
4
Water pipes
4
1
3
2
EKRTR + EKRTETS
Room thermostat
4PW56105-1
Installation manual
5
4
Connect the temperature sensor cable to the thermostat as
described in "Wall-mounted installation" on page 6.
NOTE
Install the temperature sensor as close as possible
to the floor loop inlet and as close as possible to the
floor surface as shown in the figure on page 4.
Installation manual
6
EKRTR + EKRTETS
Room thermostat
4PW56105-1
3. Installation of the EKRTR
You can mount the EKRTR thermostat on the wall or use it as
table-top model.
3.1. Wall-mounted installation
The EKRTR thermostat can be wall-mounted, with supplied
screws and plugs. Refer to figure 1.
This is the case when you want to install the optional EKRTETS
as external temperature sensor.
1
At the left of the thermostat, gently push the lid.
2
Remove the front cover by pulling it towards you.
3
Optionally for the EKRTETS, unscrew the screw of the cable
holder in the bottom left corner of the back part of the
thermostat and remove the transparent cable protection.
4
Remove the battery insulator.
5
Drill holes in the wall taking the dimensions of the thermostat
into account and insert the supplied plugs in the holes.
Refer to figure 4 (unit of measurement: mm).
3
3
2
1
4
3
EKRTR + EKRTETS
Room thermostat
4PW56105-1
Installation manual
7
6
Optionally, pass the temperature sensor wiring (EKRTETS)
through the back of the thermostat and wire it as shown
below.
7
Fasten the thermostat with the supplied screws.
8
Optionally for the EKRTETS, put the transparent cable
protection back into place and fix the cable protection with
the screw.
9
Close the thermostat cover.
10
Remove the protective film from the LCD.
3.2. Table-top installation of the thermostat
Only if the optional temperature sensor
EKRTETS
is not installed as external
temperature sensor, the EKRTR can be
used as a table-top model.
In that case, no particular installation
for the thermostat is needed. The
thermostat functions as a complete
wireless unit and can be put anywhere
in the house into its table holder.
Remove the battery insulator and the protective film from the
LCD, as described in "Wall-mounted installation" on page 6.
Be careful not to pinch the wiring when fastening.
Installation manual
8
EKRTR + EKRTETS
Room thermostat
4PW56105-1
3.3. Installation of the receiver
The receiver needs to be installed indoors, typically close to the
unit.
Recommendations for an optimum signal
reception
Take the installation suggestions for the receiver into account
when selecting the installation location and follow the
recommendations below.
■
Do not install the receiver inside a metal box.
■
Mount the receiver vertically, and minimum 10 cm away
from the unit.
■
Mount the receiver minimum 10 cm away from any vertical
metal pipe or vertical electric circuit.
■
Mount the receiver at least 1.5 m above the ground.
Before obtaining access to terminals, all power
supply circuits must be interrupted.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Daikin Thermostat Handbücher
Daikin
Daikin Premium Mini D2270 Originalbetriebsanleitung
Daikin
Daikin 910121750 Betriebsanleitung
Daikin
Daikin MTB 158 Handbuch
Daikin
Daikin 668811201 Allgemeine Anweisungen
Daikin
Daikin EKRTRB Bedienungsanleitung
Daikin
Daikin DZK-MTS-3 Bedienungsanleitung
Daikin
Daikin homecontrols EKRRVATU1BA Bedienungsanleitung
Daikin
Daikin BACnet Series Bedienungsanleitung
Daikin
Daikin TSTATD4271C Handbuch
Daikin
Daikin MT 180 Handbuch
Daikin
Daikin EKRTWA Bedienungsanleitung
Daikin
Daikin ESFV06A6 Bedienungsanleitung
Daikin
Daikin 910193131 Bedienungsanleitung
Daikin
Daikin TSTATD1152-2 Bedienungsanleitung
Daikin
Daikin ENVi Bedienungsanleitung
Daikin
Daikin Altherma 3 R F Bedienungsanleitung
Daikin
Daikin 910121748 Bedienungsanleitung
Daikin
Daikin TSTATD2100-2 Betriebsanleitung
Daikin
Daikin One+ Leitfaden
Daikin
Daikin DT4272 Fehlerbehebungshandbuch
Beliebte Thermostat Handbücher anderer Marken
EWELLY
EWELLY EW-181 Bedienungsanleitung
Prolon
Prolon T1100 Montageanleitung
Computherm
Computherm Q20 Bedienungsanleitung
Heatmiser
Heatmiser neoStat Bedienungsanleitung
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung
