Daikin TSTATD2100-2 Betriebsanleitung

Owner's

Manual

and

Installation

Instructions

TSTATD2100-2

RESIDENTIAL

for

Residential Use

Digital Thermostat

Heat Pump • Non-Programmable

Table of Contents

Safety Warnings ...................................................................3

Front Panel.............................................................................4

Dispay.....................................................................................5

Normal Operation.................................................................6

Aux Heat.................................................................................7

Fahrenheit or Celsius...........................................................8

Preparation............................................................................9

Remove Old Thermostat .....................................................10

Battery Replacement ..........................................................11

Wire Connections................................................................12

Sample Wiring Diagrams...................................................13

Test Operation ......................................................................17

Troubleshooting ...................................................................19

Warranty................................................................................20

The two Alkaline “AA” batteries must be replaced at

least once every 12 months to ensure proper operation.

The Low Battery icon will appear on the display when it is

time to replace the batteries. If the thermostat is connected

to 24v power, the batteries should still be installed, but are

not required.

When “Low Battery “ is displayed the batteries must be

replaced immediately.The manufacturer cannot be liable for

improper operation of the thermostat if the batteries are not

immediately replaced.

Annual battery replacement is especially critical in locations

subject to freezing temperatures. The thermostat will be

unable to turn on the heating system if the batteries are

exhausted.

This device complies with Part 15 of the FCC rules. Operation

is subject to the following two conditions: (1)This device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause

undesired operation.

Follow Installation Instructions carefully.

DISCONNECT POWERTOTHE

HEATER - AIR CONDITIONER

BEFORE REMOVINGTHE OLD

THERMOSTAT AND INSTALLING

THE NEW THERMOSTAT.

Safety Warnings

Front Panel

COOLER &

WARMER

BUTTONS

DISPLAY

HEAT

BATTERIES

COOL

OFF

FAN

HEAT

AUTO

On or Auto

FAN SWITCH

BI-COLOR LED

Heat or Cool demand

indicator when system

powered: Red = Heat

Green = Cool

MODE SWITCH

Cool, Off, or Heat

BATTERY

DOOR

AUX HEAT

NORM

EMRGC’Y LOCKOUT

Display

1Heat and Cool indicators. In normal operation, Heat or Cool

appears, depending on the Mode Switch position. When heat

or cool is energized, the Heat or Cool indicator will ﬂash.

2Current room or set temperature.

3Desired set temperature indicator.

When this indicator is on, the large numbers represent the

desired room temperature. Pressing the COOLER or WARMER

button during normal operation will cause the large numbers

to switch from the current room temperature to the desired set

temperature.

4Indicates battery life is low; it is recommended to replace the

batteries at this time.

5Indicates auxiliary heat is energized.

SET TEMP

LOW

BATTERY

HEAT

AUX

COOL

Normal Operation

1Select Cool or Heat with the Mode Switch.

2Normally leave the fan switched to Auto.

In Fan Auto, the fan will turn on only with a heat

or cool demand. When Fan On is selected, the fan

will run continuously.

3Adjust the desired set temperature with the

COOLER and WARMER buttons.

Operation

COOLER &

WARMER

BUTTONS

HEAT

BATTERIES

COOL

OFF

FAN

HEAT

AUTO

On or Auto

FAN SWITCH

MODE SWITCH

Cool, Off, or Heat

AUX HEAT

NORM

EMRGC’Y LOCKOUT

Aux Heat

HEAT

BATTERIES

COOL

OFF

FAN

HEAT

AUTO

AUX HEA

SWITCH

AUX HEAT

NORM

EMRGC’Y LOCKOUT

Emergency - Disables all compressor functions* and energizes only

Aux Heat to satisfy the heat demand.

Normal - Aux Heat is allowed to run, if necessary, along with the

heat pump to satisfy the heat demand.

Lockout - Aux Heat will never turn on regardless of the heat demand.

*When the Aux Heat switch is in the Emergency position the

compressor will also be locked out during cooling operation.

Fahrenheit or Celsius

1Select Off with the Mode Switch.

2Press and hold the COOLER and WARMER buttons at the same

time until the temperature is displayed in degrees Celsius.

3Repeat this process to display the temperature in degrees

Fahrenheit.

Operation

COOLER & WARMER

BUTTONS

HEAT

BATTERIES

COOL

OFF

FAN

HEAT

AUTO

MODE SWITCH

Cool, Off, or Heat

AUX HEAT

NORM

EMRGC’Y LOCKOUT

Preparation

• Proper installation of the thermostat will be accomplished by

following these step by step instructions. If you are unsure about

any of these steps, call a qualiﬁed technician for assistance.

• These tools will be required:

• Make sure your Heat Pump is working properly before

beginning installation of the thermostat.

• Carefully unpack the thermostat. Save the screws

and instructions.

• Turn off the power to the Heat Pump system at the

main fuse panel.

Flat Blade

Screwdriver

Wire Cutter

& Stripper

Remove & Replace Old Thermostat

• Remove the cover of the old thermostat. If it does not come off

easily check for screws.

• Loosen the screws holding the thermostat base or subbase to

the wall, and lift away.

• Disconnect the wires from the old thermostat.Tape the ends

of the wires as you disconnect them, and mark them with

the letter of the terminal for easy reconnection to the new

thermostat.

• Keep the old thermostat for reference purposes, until your new

thermostat is functioning properly.

Inhaltsverzeichnis

Andere Daikin Thermostat Handbücher

Daikin

Daikin Airzone DZK-4 Bedienungsanleitung

Daikin

Daikin TSTATD1152-2 Bedienungsanleitung

Daikin

Daikin homecontrols EKRCTRDI2BA Benutzerhandbuch

Daikin

Daikin One+ Leitfaden

Daikin

Daikin 910121750 Betriebsanleitung

Daikin

Daikin BACnet IM 1248 Bedienungsanleitung

Daikin

Daikin ENVi Bedienungsanleitung

Daikin

Daikin One+ Bedienungsanleitung

Daikin

Daikin BACnet IM 1234-1 Handbuch

Daikin

Daikin 668375401 Allgemeine Anweisungen

Daikin

Daikin 668811201 Allgemeine Anweisungen

Daikin

Daikin 910121748 Bedienungsanleitung

Daikin

Daikin 668811101 Allgemeine Anweisungen

Daikin

Daikin DZK-MTS-3 Bedienungsanleitung

Daikin

Daikin Home Controls EKRRVATR2BA Produktinformationsblatt

Daikin

Daikin EKRTWA Bedienungsanleitung

Daikin

Daikin TSTATD4271C Handbuch

Daikin

Daikin EKRTWA Bedienungsanleitung

Daikin

Daikin 910193131 Bedienungsanleitung

Daikin

Daikin EKRTRB Bedienungsanleitung

Daikin

Daikin TSTATD2200C-2 Betriebsanleitung

Daikin

Daikin EKRTR Bedienungsanleitung

Daikin

Daikin EKRTWA Bedienungsanleitung

Daikin

Daikin MT 180 Handbuch

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung