Danby DAC5111M Montageanleitung

Danby Products Limited, Ontario, Canada N1H 6Z9

Danby Products Inc., Findlay, Ohio, USA 45840

Model • Modèle • Modelo

• Owner’s Use and Care Guide

• Guide d’utilisation et soins de Propriètaire

AIR CONDITIONER

CLIMATISEUR

V1 11.10 DM

DAC5111M / DAC5211M

Contents

CAUTION:

PRECAUTION:

Read and follow all safety rules and operat-

ing instructions before first use of this prod-

uct.

Veuillez lire attentivement les consignes de

sécurité et les instructions d’utilisation avant

l’utilisation initiale de ce produit.

CLIMATISEUR

Guide d'utilisation et d'entretien ........................

• Bienvenue

• Consignes de Sécurité Importantes

• Caractéristiques

• Installation

• Consignes d’utilisation

• Soins et Entretien

• Dépannage

• Garantie

2-11

AIR CONDITIONER

Owner’s Use and Care Guide .............................

• Welcome

• Important Safety Information

• Features

• Installation

• Operation Instructions

• Care and Maintenance

• Troubleshooting

• Warranty

Model • Modèle DAC5111M / DAC5211M

12-21

Welcome

Thank you for choosing a Danby appliance to provide you and your family with all of the “Home Comfort” requirements

of your home, cottage, or office. This Owner’s Use and Care Guide will provide you with valuable information necessary

for the proper care and maintenance of your new appliance. If properly maintained, your Danby appliance will give you

many years of trouble free operation. Please take a few moments to read the instructions thoroughly and familiarize

yourself with all of the operational aspects of this appliance.

For easy reference, may we suggest you attach a copy of your sales slip/receipt to this page, along with the following

information, located on the manufacturers nameplate on side of the unit.

NOTE: THIS UNIT IS NOT DESIGNED FOR “THROUGH-THE-WALL” INSTALLATION.

Model Number:

Serial Number:

Date of Purchase:

This information will be necessary if your unit requires servicing and/or for general inquiries. To contact a Customer

Service Representative, call Danby TOLL FREE: 1-800-263-2629

WARNING

Improper connection of the grounding plug can result in risk of

Fire, Electric Shock and/or injury to Persons associated with the

appliance. Check with a qualified service representative if in doubt

that the appliance is proplery grounded.

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

ELECTRICAL

SPECIFICATIONS

FOR YOUR SAFETY: Read these instructions carefully before operating the unit.

1) All wiring must comply with local and national electrical codes and must

be installed by a qualified electrician. If you have any questions

regarding the following instructions, contact a qualified electrician.

2) Check available power supply and resolve any wiring problems

BEFORE installing and operating this unit.

3) This 115V air conditioner uses 4.8 or less nameplate amps and may

be used in any properly wired, general purpose household receptacle.

See Table 1 for specifications for individual branch circuit.

4) For your safety and protection, this unit is grounded through the power

cord plug when plugged into a matching wall outlet. If you are not sure

whether your wall outlet is properly grounded, please consult a qualified

electrician.

5) The wall outlet must match the 3-prong plug on the service cord

supplied with the unit. DO NOT use plug adapters. See Table 2 for

receptacle and fuse information. If it is necessary to use an extension

cord to connect your air conditioner, use an approved “air

conditioner” extension cord only (available at most local hardware

stores).

6) The rating plate on the unit contains electrical and other technical data.

The rating plate is located on the right side of the unit, above the power

cord.

TABLE 1

Suggested Individual Branch Circuit

Nameplate Amps *AWG Wire Size

4.5 to 4.8 18

AWG- American Wire Gauge

*Based on copper wire at 60°C temperature rating.

TABLE 2

Receptacle and Fuse Types

Rated Volts 125

Amps 15

Wall Outlet

Fuse Size 15

Time Delay Fuse Plug Type

(or Circuit Breaker)

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

ENERGY SAVING TIPS

FOR YOUR SAFETY: Read these instructions carefully before operating the unit.

Your Danby appliance is designed to be highly efficient in energy

savings. Follow these recommendations for greater efficiency.

1) Select a thermostat setting that suits your comfort needs and leave at

that chosen setting.

2) The air filter is very efficient in removing airborne particles. Keep the air

filter clean at all times. (usually cleaned every 2 weeks depending on

indoor air quality).

3) Use drapes, curtains or shades to keep direct sunlight from penetrating

and heating the room, but do not allow drapes or curtains to obstruct

the air flow around the unit.

4) Start your air conditioner before the outdoor air becomes hot and

uncomfortable, to avoid an initial period of discomfort while the unit is

cooling off the room.

5) When outdoor temperatures are cool enough, use HIGH or LOW FAN

only. This circulates indoor air, providing some cooling comfort, and

utilizes less electricity than when operating on a cooling setting.

Features

Air FIlter

Exterior

Air Inlet

Cabinet

Interior Air Inlet

Control Panel

Interior Air Outlet

Installation Instructions

CAUTION

Because the compressor is located on the controls side of the unit

(left side), this side will be heavier and more awkward to manipu-

late. Inadequate support on control side of the unit can result in

personal injury and damage to your unit and property. Therefore, it

is recommended that you have someone assist you during the

installation of this unit.

TOOLS NEEDED FOR INSTALLATION:

• Screw Drivers: Phillips and flat head.

• Power Drill: 1/8” (3.2mm) diameter drill bit.

• Pencil

•Measuring Tape

• Scissors

• Carpenters Level

NOTE: Save the shipping carton and packing materials for future storage

or transportation. From carton, remove the plastic bag containing the

installation hardware kit necessary for the installation of your air

conditioner. Please check the contents of hardware kit against the corre-

sponding model check list, prior to installation of the unit. See Fig. 1.

ELECTRIC SHOCK HAZARD

To avoid the possibility of personal

injury, disconnect power to the unit

before installing or servicing.

NOTE: Your Room Air Conditioner is

designed for easy installtion in a single or

double-hung window. This unit is NOT

designed for vertical (slider type) windows

and/or through-the-wall applications.

Installation Instructions

Fig. 1

INSTALLATION

HARDWARE

LOCATION A) This room air conditioner is designed to fit easily into a single or double

hung window. However, since window designs vary, it may be

necessary to make some modifications for safe, proper installation.

B) Make sure window and frame are structurally sound and free from dry

and rotted wood.

C) For maximum efficiency, install the air conditioner on a side of the

house or building which favours more shade than sunlight. If the unit is

in direct sunlight, it is advisable to provide an awning over the unit.

D) Provide sufficient clearance around the cabinet to allow for ample air

circulation through the unit (See Fig. 2). The rear of the unit should be

outdoors and not in a garage nor inside a building. Keep unit as far

away as possible from obstacles/obstructions and at least 30” above

the floor or ground. Curtains and other objects within a room should be

prevented from blocking the air flow.

E) Be certain the proper electrical outlet is within reach of the installation.

Use only a single outlet circuit rated at 15 amps. All wiring should be in

accordance with local and national electrical codes.

F) DO NOT install unit where leakage of combustible gas is suspected.

Your air conditioner may fail to operate in air containing oils (including

machine oils), sulfide gas, near hot springs, etc.

NOTE: Your unit is designed to evaporate condensation under normal

conditions. However, under extreme humidity conditions, excess conden-

sation may cause basepan to overflow to the outside. The unit should be

installed where condensation run-off cannot drip on pedestrains or neigh-

boring properties.

3/4in. (19.1mm)

screws (7) Safety Lock (1)

3/8in. (9.5mm) screws

(4) *Factory installed

on some models

“L” Shaped

mounting

bracket (1)

* Factory installed

on some models

Sash bracket (2)

Adhesive

Foam Seal(1)

Side Curtain LH (1)

Side Curtain RH (1)

LOCATION

Installation Instructions

Awning

Fence,

wall, or

other

obstacle

Ground

Side

Obstruction

20”

Min

30”

Min

20”

Min

12” Min

Fig. 2

1) Assembly of the Upper Channel to Cabinet. (Factory installed on some units)

• “L” Shaped Top Channel: Install the “L” shaped channel to the top of the

cabinet as shown in Fig. 3, using four (4) 3/8” screws.

2) Assembly of the Side Curtains to Cabinet.

• Extend the shutter from the shutter frame and slide it into the shutter tabs

on the side channel of the air conditioner, as shown in Fig. 4.

• Slide the shutters into the top (“L” Shaped) and bottom (“U” Shaped)

channels. The shutters are identified (on frame) as left and right.

3) Completing the Installation

• Cut the foam (non adhesive) sealing strip to fit the area of the window sill

that the air conditioner will rest on.

3/8” screws

“L” shaped mounting

bracket

“U” shaped Channel

(Factory Installed)

Slide down into tabs

Shutter tabs

Shutter

Shutter frame

Fig. 3

Fig. 4

Installation Instructions

3) Completing the Installation (cont’d)

• Carefully place the air conditioner into the window with the “L” shaped

mounting bracket (on top) positioned in front of the upper window sash.

The bottom of the cabinet should be positioned on the “recessed” portion

of the window frame. Pull the window down until it rests just behind the

front flange of the (top) “L” shaped mounting bracket (See Fig. 5).

• Expand the shutter frames (fully) on each side and secure the top of the

frames to the window sash using one 3/4” screw on each side and one in

the “L” shaped mounting bracket (Fig. 5).

• Secure the shutter clamp on each side of the (lower) shutter and secure

to window sill using one 3/4” screw on each side (Fig. 5).

• Place the second foam sealing strip to fit the opening between the inside

and outside windows, then attach the safety lock to the outside window

frame using one 3/4” screw (See Fig. 6).

PLEASE NOTE: Window applications come in a variety of different styles.

Therefore, it may be necessary to modify or improvise your particular

installation.

Window sash

“L” Shaped

Mounting

Bracket

Shutter clamps

3/4” screws

Fig. 5

Safety Lock

3/4” screw

Foam Seal

Fig. 6

Operating Instructions

CONTROLS SELECTOR SWITCH: The selector switch controls fan speed and/or cool-

ing speed. To set desired cooling temperature, simply rotate the

SELECTOR knob to the appropriate setting.

FAN SPEEDS:

• LOW FAN will circulate air at minimum speed without cooling.

• HIGH FAN will circulate air at maximum speed without cooling.

COOLING MODES:

• LOW COOL provides cooling with minimum air circulation.

Recommended for night-time use.

•HIGH COOL provides cooling with maximum air circulation.

Recommended for quick cooling or for extremely hot days. Once room is

cooled, reduce setting to LOW COOL.

• OFF shuts-down the unit completely

NOTE: Always allow 3 minutes before switching from one mode to

another.

THERMOSTAT: The thermostat automatically controls the (compressor)

cooling cycle and maintains the selected room temperature. To set the

thermostat, rotate the thermostat knob to the desired cooling setting (1

warmest - 7 coldest). The fan motor will continue to operate after the com-

pressor (cooling) has cycled off. This is normal.

IMPORTANT

When using FAN control, turn selector switch slowly, allowing unit

to adjust. When using THERMOSTAT, be sure to allow three min-

utes before changing temperature. Adjusting too quickly may cause

compressor to overload.

Thermostat

Selector

Switch OFF

arrêt

Care and Maintenance

CLEAING When cleaning the air conditioner, be sure to turn the SELECTOR knob to

the “OFF” position and disconnect the power cord from the electrical

outlet.

1) DO NOT use gasoline, benzene, thinner, or any other chemicals to

clean this unit, as these substances may cause damage to the finish

and deformation of plastic parts.

2) Never attempt to clean the unit by pouring water directly over any of the

surface areas, as this will cause deterioration of electrical components

and wiring insulation.

AIR FILTER If the air filter becomes clogged with dust, air flow is obstructed and

reduces efficiency. The air filter should be cleaned every 2 weeks.

AIR FILTER REMOVAL:

The air filter is located behind the air intake front grill. To remove the air

filter, grasp the filter handle on the front of the gril and slide it out to the

right.

To reinstall the air filter, reverse the above procedures. The air filter must

be vacuumed or washed by hand in warm water. Dry thoroughly before

re-installing.

CLEANING AIR FILTER:

1) Use a vacuum cleaner with soft brush attachment

2) Wash the filter in lukewarm water below 40°C (104°F): To get best

results, wash with soapy water or a neutral cleaning agent.

3) Rinse the filter with clean water and dry thoroughly before re-installing.

IMPORTANT

DO NOT forget to install the air filter. If the air conditioner is left to

operate without the air filter, dust is not removed from the room air

and may result in machine failure. When the air inlet grill and cabi-

net are dirty, wipe with lukewarm water (below 40°C). Use of a mild

detergent is recommended.

END OF SEASON

CARE

1) Operate the fan alone for half a day to dry out the inside of the unit.

2) Turn off power and remove plug from wall socket.

3) Clean filter.

4) Store (covered) air conditioner in a dry location.

CAUTION

When installing and/or removing the air conditioner from the win-

dow, ensure that caution is taken to prevent it from falling

backward. It is recommended that installation or removal of the air

conditioner is done with assistance to prevent injury to persons or

damage to the unit or property.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Danby Klimaanlage Handbücher

Danby

Danby DPA100E5WDB-6 Bedienungsanleitung

Danby

Danby DPAC8399 Bedienungsanleitung

Danby

Danby DAC150ECB1GDB Montageanleitung

Danby

Danby DPA140B1WDB-6 Bedienungsanleitung

Danby

Danby DPSL120B1W Bedienungsanleitung

Danby

Danby DPAC5009 Montageanleitung

Danby

Danby Arctic Aire AAC060EB1G Montageanleitung

Danby

Danby dac10507ee Bedienungsanleitung

Danby

Danby DPA060CB4WDB Bedienungsanleitung

Danby

Danby DPTA090HEB1WDB Bedienungsanleitung

Danby

Danby DAC145EB6WDB-RF Bedienungsanleitung

Danby

Danby DAC080EB7WDB-RF Bedienungsanleitung

Danby

Danby DAC10000 Montageanleitung

Danby

Danby DAC060ECB4GDB Montageanleitung

Danby

Danby APAC9036 Bedienungsanleitung

Danby

Danby DAC080BGUWDB Bedienungsanleitung

Danby

Danby DAC100ECB4GDB Montageanleitung

Danby

Danby DPA100E3WDB Bedienungsanleitung

Danby

Danby Designer DPA100A1GD Bedienungsanleitung

Danby

Danby DESIGNER DPAC10011BL Montageanleitung

Danby

Danby DAS090BAHWDB Bedienungsanleitung

Danby

Danby DPA120B1WB Bedienungsanleitung

Danby

Danby DAC060ECB2GDB Montageanleitung

Danby

Danby DPA100E5WDB-RF Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung