Danby DPA120HEAUBDB Bedienungsanleitung

DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9

DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840

OWNER’S MANUAL

MANUEL DU PROPRIÉTAIRE

MANUAL DEL PROPIETARIO

PORTABLE AIR CONDITIONER

Owner’s Manual.............................1 - 12

CLIMATISEUR PORTABLE

Manuel du propriétaire.................13 - 24

AIRE ACONDICIONADO PORTÁTIL

Manual del propietario.................25 - 36

MODEL •MODÈLE •MODELO

DPA120HEAUBDB

DPA140HEAUBDB

2017.11.23

Welcome

Welcome to the Danby family. We are proud of our quality products and we believe in

dependable service. We suggest that you read this owner’s manual before plugging in your new

appliance as it contains important operation information, safety information, troubleshooting and

maintenance tips to ensure the reliability and longevity of your appliance.

Visit www.Danby.com to access self service tools, FAQs and much more. For additional assistance

call 1-800-263-2629.

Note the information below; you will need this information to obtain service under warranty.

You must provide the original purchase receipt to validate your warranty and receive service.

Model Number: _________________________________________________

Serial Number: _________________________________________________

Date of Purchase: _______________________________________________

Need Help?

Before you call for service, here are a few things you can do to help us serve you better.

Read this owner’s manual:

It contains instructions to help you use and maintain your appliance properly.

If you receive a damaged appliance:

Immediately contact the retailer or builder that sold you the appliance.

Save time and money:

Check the troubleshooting section at the end of this manual before calling. This section

will help you solve common problems that may occur.

1-800-26- Danby

(1-800-263-2629)

SAFETY REQUIREMENTS

This appliance is not intended for use by persons

(including children) whose physical, sensory or

mental capabilities may be different or reduced,

or who lack experience or knowledge, unless such

persons receive supervision or training to operate

the appliance by a person responsible for their

safety.

Children should be supervised to ensure that they

do not play with the appliance.

To avoid risk of electric shock, do not operate this

appliance in an area that is likely to accumulate

standing water. If this condition develops, disconnect

the power supply before stepping into the water.

Do not store or use combustible materials such as

gasoline or other ﬂammable vapors or liquids in the

vicinity of this or any other appliance.

Do not insert ﬁngers or other objects into grills or

openings in the appliance.

Do not cover or block the intake and exhaust

openings.

Do not operate the appliance without the ﬁlter

installed.

Do not operate the appliance near heat sources.

This appliance is intended for indoor, residential

applications only. Do not use this appliance

outdoors. Do not use this appliance for commercial

or industrial applications.

If the air conditioner is transported on its back or

side, it must be allowed to stand upright for 6 hours

before plugging in to avoid damage to internal

components.

Keep the appliance away from walls, furniture and

curtains with a clearance of at least 30 cm (12

inches) on all sides.

GROUNDING INSTRUCTIONS

This appliance must be grounded. Grounding

reduces the risk of electrical shock by providing an

escape wire for the electrical current.

This appliance has a cord that has a grounding

wire with a 3-prong plug. The power cord must be

plugged into an outlet that is properly grounded.

If the outlet is a 2-prong wall outlet, it must be

replaced with a properly grounded 3-prong wall

outlet. The serial rating plate indicates the voltage

and frequency the appliance is designed for.

WARNING - Improper use of the grounding

plug can result in a risk of electric shock.

Consult a qualiﬁed electrician or service agent

if the grounding instructions are not completely

understood, or if doubt exists as to whether the

appliance is properly grounded.

Do not connect the appliance to extension cords,

adapters or together with another appliance in the

same wall outlet.

Do not splice the power cord. Do not under any

circumstances cut or remove the third ground prong

from the power cord.

If the power supply cord is damaged, it must be

replaced by the manufacturer, its service agent or

similar qualiﬁed person in order to avoid hazard.

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS!

INSTALLATION INSTRUCTIONS

ASSEMBLING THE WINDOW KIT

1. Attach the air outlet adapter and the window

slider adapter onto either end of the exhaust

hose.

2. Insert the air outlet adapter into the lower

groove of the air outlet on the back of the

appliance. Ensure that the hook of the adapter

is aligned with the hole seat of the air outlet and

then slide down

3. Measure the window opening where the window

kit will be installed. Assemble as many sliders as

necessary to ﬁt the window.

4. If the length of the window requires all three

sliders, use two bolts to fasten the sliders at the

correct length.

5. If the window opening is less than the minimum

length of a single slider, use the slider that has

the hole in it and cut it to the correct length.

Make sure not to cut the end that has the hole

as this is necessary to attach the exhaust hose

adapter.

REQUIRED TOOLS

1. Medium sized Phillips screwdriver

2. Tape measure or ruler

3. Knife or scissors

4. Saw (in the event that the window sliders need to

be cut to size)

ACCESSORIES

1. Air outlet adapter

2. Exhaust hose

3. Window slider adapter

4. Bolts

5. Window slider A

6. Window slider B and C

7. Caster locks

8. Foam seal A (adhesive)

9. Foam seal B (adhesive)

10.Foam seal C (non-adhesive)

11.Security bracket and 2 screws

12.Drain hose

13.Remote control

INSTALLATION INSTRUCTIONS

INSTALLING THE WINDOW KIT

There are two possible installation methods

depending on the available window type.

Hung Window Installation

1. Cut the adhesive foam seals A and B to the

correct length for the window. Attach them to the

window sash and frame as shown.

2. Insert the assembled window slider kit into the

window opening.

3. Cut the non-adhesive foal seal C to match

the width of the window. Insert the foam seal

between the glass and the window frame to

prevent air and insects from getting into the

room.

4. Install the security bracket in the window frame

with the two provided screws.

5. Attach the window slider adapter to the hole in

the window slider kit.

Note: Do not over extend or bend the hose as this

will impede air ﬂow.

INSTALLATION INSTRUCTIONS

Sliding Window Installation

1. Cut the adhesive foam seals A and B to the

correct length for the window. Attach them to the

window sash and frame as shown.

2. Insert the assembled window slider kit into the

window opening.

3. Cut the non-adhesive foal seal C to match

the width of the window. Insert the foam seal

between the glass and the window frame to

prevent air and insects from getting into the

room.

4. Install the security bracket in the window frame

with the two provided screws.

5. Attach the window slider adapter to the hole in

the window slider kit.

Note: Do not over extend or bend the hose as this

will impede air ﬂow.

OPERATING INSTRUCTIONS

FEATURES

Front

1. Control panel

2. Air outlet grill

3. LED display

4. Handle (both sides)

5. Air intake grill

6. Rollers

Rear

1. Air intake grill

2. Air outlet

3. Drain outlet

4. Power cord

LOCATION

Place the air conditioner on a smooth, level ﬂoor

that is strong enough to support it and all included

accessories.

Make sure the appliance is level to minimize noise

and vibration.

The appliance must be installed near a grounded

receptacle and the overﬂow drain outlet on the rear

of the appliance must be accessible.

Do not cover air inlets or outlets or the remote

control receiver on the control panel.

The appliance requires 30 cm (12 inches) of

clearance on the front and sides.

The appliance requires at least 50 cm (20 inches) of

clearance on the back.

OPERATING INSTRUCTIONS

CONTROL PANEL

1. Fan Button: Press to select fan speed; low,

medium, high.

2. Mode Button: Press to select the desired mode;

cool, dry, fan.

3. Power Button: Press to turn the appliance on or

off.

4. Up and Down Buttons:

• Used to adjust the set temperature in 1°

increments.

• Press and hold both up and down buttons for 3

seconds to change the temperature display from

°C to °F.

LED DISPLAY

1. Temperature and Timer Display: Shows the set

temperature of the timer setting.

2. Temperature Scale: Indicates whether the

temperature scale is set to °C or °F.

3. Timer Indicator: Illuminates if the timer is

activated.

4. Fan Speed Display: Shows the current fan speed

setting; low, med, high.

5. Mode Display: Shows the current mode; cool,

dry, fan.

REMOTE CONTROL

1. Fan Button: Press to select fan speed; low,

medium, high.

2. Swing Button: Press to start the auto swing

feature. When auto swing is activated, press

again to stop the louver at the desired angle.

3. Sleep: Press to start the sleep function.

4. Up and Down Buttons: Used to set the

temperature and timer.

5. Power Button: Press to turn the appliance on or

off.

6. Mode Button: Press to select the desired mode.

Modes will cycle in sequence with each press of

the button; cool, dry, fan.

7. Timer Button: Press to set the timer function.

8. °C/°F Button: Press to change the temperature

display from °C to °F.

Operating Modes

• Cool Mode

Choose cool mode to set the cooling function. Use

the up and down arrows to choose the desired

temperature. Press the fan button to adjust the fan

speed.

The temperature can be set within a range of 18 -

32°C (64 - 90°F).

The exhaust hose should be installed during cool

mode to ensure the best results.

• Dry Mode

Choose dry mode to remove excess moisture from

the air during periods of high humidity. All water

pulled from the air will collect inside the appliance

and evaporate due to the heat from the compressor.

In especially humid conditions, it may be necessary

to empty the drain pan when it becomes full. Press

the fan button to adjust the fan speed.

The exhaust hose should be installed during dry

mode to ensure the best results.

• Fan Mode

Choose fan mode to run the internal fan without

engaging the cooling function. Press the fan button

repeatedly to choose the fan speed, low, med, high.

• Heat Mode

Choose heat mode to set the heating function. Use

the up and down arrows to choose the desired

temperature. Press the fan button to adjust the fan

speed.

The temperature can be set within a range of 13 -

27°C (55 - 81°F).

OPERATING INSTRUCTIONS

Timer Function

To set the turn off timer:

1. Ensure the appliance is turned on.

2. Press the timer button, the time on the display

will ﬂash.

3. Press the timer button to select the desired

amount of hours before the unit turns off.

To set the turn on timer:

1. Ensure the appliance is turned off.

2. Press the timer button, the time on the display

will ﬂash.

3. Press the timer button to select the desired

amount of hours before the unit turns on.

Notes:

• The display will revert back to showing the

temperature setting if the appliance does not

receive a signal within a 5 second period during

programming.

• Turning the appliance on or off at any time

or adjusting the timer setting to 0.0 hours will

cancel the timer settings.

• The timer can be set between 1 - 24 hours.

Sleep Function

The sleep function can be used to conserve energy

during sleeping hours.

When selected, the set temperature will increase

by 2 degrees over a 2 hours period. The appliance

will hold the new set temperature for 7 hours before

automatically returning to normal operation.

The sleep function can be canceled at any time by

pressing the sleep button.

OPERATING INSTRUCTIONS

REPLACING THE REMOTE BATTERIES

The remote control will arrive with a CR2025 coin

battery pre-installed. It may be necessary to remove

a clear, plastic insulating strip before ﬁrst use of the

remote control.

Follow the steps below to replace the battery.

1. Use a screwdriver to remove the screw that

secures the battery cover.

2. Push the battery cover hook to the right to

release it from the remote control. Pull the

battery cover out.

IMPORTANT

Do not dispose of

batteries as unsorted

municipal waste. Refer

to local laws for proper

disposal of batteries.

Notes:

• The air conditioner will not respond if curtains,

doors or other materials block the signal from

the remote control to the appliance.

• If the infrared signal receiver on the indoor unit

is exposed to direct sunlight, the air conditioner

may not function properly. Use curtains to

prevent the sunlight from falling on the receiver.

• Do not allow the remote control to get wet.

• Do not expose the remote control to direct

sunlight or heat.

• Do not leave the battery in the remote control

if it is not going to be used for more than 2

months.

WATER DRAINAGE

When the internal drain pan becomes full the

appliance will beep 8 times and the digital display

will show error code P1. The air conditioning or

dehumidifying action will stop but the fan may

continue to operate.

Follow the steps below to drain the appliance.

1. Turn the appliance off and unplug it from the

power source.

2. Carefully move the appliance to a location

where the water can be drained.

3. Remove the drain plug and allow the water to

completely drain.

4. Replace the bottom drain plug, pressing ﬁrmly to

ensure a tight ﬁt and no leaks.

5. The P1 error symbol will disappear and the

appliance will resume regular function once

power is restored.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Danby Klimaanlage Handbücher

Danby

Danby DAC5130 Bedienungsanleitung

Danby

Danby DPA120CB1WDB Montageanleitung

Danby

Danby DPA100B9IWDB-6 Bedienungsanleitung

Danby

Danby DAC060EB6WDB Bedienungsanleitung

Danby

Danby DPA120B1WB Montageanleitung

Danby

Danby dac10007ee Montageanleitung

Danby

Danby DAC050MB1WDB-RF Bedienungsanleitung

Danby

Danby DPAC8098 Bedienungsanleitung

Danby

Danby DAC5002D Bedienungsanleitung

Danby

Danby Premiere DPAC13012H Montageanleitung

Danby

Danby DAS120BAHWDB Bedienungsanleitung

Danby

Danby AAC5246DE Bedienungsanleitung

Danby

Danby DPA120B1WB Bedienungsanleitung

Danby

Danby DPA140HCB1WDD Montageanleitung

Danby

Danby DAC050MB1WDB Bedienungsanleitung

Danby

Danby DAC080B8IWDB-6 Bedienungsanleitung

Danby

Danby DAC050MCB1GDB Montageanleitung

Danby

Danby Designer DAC6003D Bedienungsanleitung

Danby

Danby DPA058B6WDB-RF Bedienungsanleitung

Danby

Danby DAC080ECB3GDB Montageanleitung

Danby

Danby DAC150EUB2GDB Montageanleitung

Danby

Danby Premiere DPAC9009 Montageanleitung

Danby

Danby Premiere DPAC9009 Bedienungsanleitung

Danby

Danby DAC180BBUWDB Montageanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung