Danfoss SonoSelect 10 Bedienungsanleitung

03/2017 © Danfoss VUIGB602

www.heating.danfoss.com

Installation & User Guide

SonoSelect and SonoSafe

energy meters

2 | © Danfoss | Energy Meters | 2017.03 VUIGB702

Installation & User Guide SonoSelect and SonoSafe

Note! To ensure latest version of declaration, please visit danfoss.com.

VUIGB702 © Danfoss | Energy Meters | 2017.03 | 3

Installation & User Guide SonoSelect and SonoSafe

Contents

1. Inside the box ........................................................................... 4

2. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.1 Preparation...........................................................................4

2.2 Identification of installation: Supply/Return pipe installation ...........................5

2.3 Flow sensor installation...............................................................5

2.4 Mounting orientation, calculator ......................................................5

2.5 Mounting of O-ring and temperature sensor ..........................................6

2.6 Communication (Expansion modules).................................................7

2.7 Installation of module/cable ........................................................ 10

2.8 Battery ..............................................................................11

3. Commissioning ......................................................................... 12

3.1 Bleeding ........................................................................... 12

3.2 Supply/return configuration .........................................................12

3.3 Meter sealing....................................................................... 12

3.4 IP class ............................................................................. 12

4. Function overview ...................................................................... 13

4.1 Menu structure ..................................................................... 13

4.2 Display explanation..................................................................14

4.3 Alarms ..............................................................................14

5. Device overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

6. Disposal................................................................................ 15

4 | © Danfoss | Energy Meters | 2017.03 VUIGB702

Installation & User Guide SonoSelect and SonoSafe

1. Inside the box

Description of components included in the box

107/2015 ©Danfoss VDIGH102

InstallationGuide

SonoSelect and SonoSafe

energy meters

1 x

Energy meter

2 x

Gaskets

1 x

Temperature sensor

O-ring and mounting pin

4 x

Wired seals

1 x

Installation

& User Guide

Note!

• For cooling meters a wall mounting kit is delivered with the product

2. Installation

2.1 Preparation

SonoSelect incorporates a tamper monitor-

ing function. If the calculator is opened the

meter will set alarm E13 in display.

Don’t open unless for adding communica-

tion module, replacing battery or installing

cables.

Reset requires Bluetooth dongle 014U1963

and SonoApp service tool.

SonoSelect is delivered with the option

of reconfiguring supply/return using the

Bluetooth dongle 014U1963 and SonoApp

service tool.

Note!

• Product is approved for ambient temperature between 5-55 °C, non-condensing (indoor installation). It is

recommended to install Calculator at max. 45 °C to secure optimal conditions for battery lifetime. At media

temperatures below ambient temperature (cooling) the calculator must be mounted separately from the flow

sensor to prevent condensation.

• Avoid installation stress from pipes and fittings.

• Flush the system.

VUIGB702 © Danfoss | Energy Meters | 2017.03 | 5

Installation & User Guide SonoSelect and SonoSafe

2.2 Identification of installation: Supply/Return pipe installation

Supply installation Return installation

Heat meters have red temp sensor in supply pipe and all cooling meters have blue temp sensor in supply pipe

2.3 Flow sensor installation

Pipe position: No limitations but avoid positions

where air can be collected.

Rotation in pipe axis: Flow sensor should be angled

in 45 to 315° to avoid air collection in flow sensor.

2.4 Mounting orientation, calculator

4 x 90°

Click!

1a.

1b.

6 | © Danfoss | Energy Meters | 2017.03 VUIGB702

Installation & User Guide SonoSelect and SonoSafe

2.5 Mounting of O-ring and temperature sensor

One temperature sensor is factory mounted in the flow sensor. The other must be mounted in the opposite

pipe relative to the flow sensor installation.

Mount O-ring

on pin.

Insert pin with

O-ring.

Position O-ring.

Remove pin.

Moist and insert sensor

probe.Tighten at torque

12 ± 2 Nm.

To ensure accuracy and a tight seal the sensor installation should comply to EN1434-2 annex A:

Key

Threaded connec-

tion size A

Tapping bore

size B

G½ 18.5 mm

G¾ 24 mm

G1 30.5 mm

Note:

Tolerance on machined dimensions = ± 0.5 mm.

Pipe fittings for use with probe type DS (Direct Short).

: provision for security sealing.

VUIGB702 © Danfoss | Energy Meters | 2017.03 | 7

Installation & User Guide SonoSelect and SonoSafe

2.6 Communication modules

Modules in general

To adapt the meter for various applications SonoSelect 10 and SonoSafe 10 features a slot for mounting

communication modules.

Each module features its own µ-controller and is powered by its own battery.

Modules have their own parameter set which is saved in the module µ-controller ﬂash memory. A local

copy of the energy meter parameters used for communication is stored in the module.

Data from module is updated in meter every 10 minutes.

Power: Lithium Thionyl Chloride battery (half of AA size).

2 pulse inputs have common ground.

Modules are galvanically isolated from energy meter circuitry

Wired M-Bus module with 2 pulse inputs

Once installed the meter will display the icon for wired communication and pulse inputs in loop 2 of the

display.

Wired M-Bus is galvanically isolated from μC and pulse inputs.

The two pulse inputs can be programmed independently of each other (see speciﬁcation for pulse input

module).

M-Bus (primary) Lithium Thionyl Chloride battery (half of AA size)

M-Bus (secondary) M-Bus supply

Baud rate supported 300, 2400, 4800, 9600

Communication protocol According to EN1434-3 & EN13757-3

Battery life time 16+1 year (from productiondate)

Wireless OMS communication module, 868.95MHz with 2 pulse inputs

Once installed the meter will display the icon for wireless communication and pulse inputs in loop 2 of the

display. The two pulse inputs can be programmed independently of each other (see speciﬁcation for

pulse input module).

Standard Open Metering System (OMS) issue 4.0.2

Frequency 868.95 MHz

Antenna Internal

Transmission power 10mW (7.8 dBm); (Max 25mW; 13,9dBm)

Mode T1 mode

Encryption AES 128 bit encryption (mode 5), Parameterized Static key

Sending interval Fixed network: 15 min.

Telegram Standard telegram*

Battery life time 16+1 year (with pulse inputs oﬀ)

* See section with data telegram.

8 | © Danfoss | Energy Meters | 2017.03 VUIGB702

Installation & User Guide SonoSelect and SonoSafe

2 pulse input module

Once installed the meter will display the icon for pulse inputs in menu 2 of the display. Accumulated

volume is only readable by communication. The two pulse inputs can be programmed independently of

each other (see speciﬁcation for pulse input module).

Pulse value 0.001 m³ to 1 m³ per pulse

Voltage supply ≤ 6.0 V

Source current ≤ 0.1 mA

High level input threshold ≥ 2 V

Low level input threshold ≤ 0.5 V

Pull-up resistor 100 kΩ

Pulse length ≥100 ms

Maximum frequency ≤ 5 Hz

Pulse inputs According to EN1434-2, section 7.1.5 (Classiﬁcation of pulse input

devices Class IB)

Battery life time 16+1 year

* Suitable for both electronic switch and Reed contact.

Data telegram

Wired M-bus

Standard telegram:

• Accumulated energy

• Accumulated volume

• Current ﬂow

• Current power

• Supply temperature

• Return temperature

• Diﬀerence temperature

• Enclosure temperature

• Current time

• Hour counter factory

• Hour counter OK

Wireless M-bus (OMS)

Standard telegram ﬁxed network:

• Accumulated energy

• Accumulated volume

• Current ﬂow

• Current power

• SupplyTemperature

• ReturnTemperature

• CurrentTime

VUIGB702 © Danfoss | Energy Meters | 2017.03 | 9

Installation & User Guide SonoSelect and SonoSafe

Terminals and cables

Communication Name Terminal No.

M-Bus Meter bus (blue or orange) 24

Meter bus (blue or orange) 25

Pulse input

Pulse input 1 + (Brown) 50

Pulse input 1 - (White) 51

Pulse input 2 + (Brown) 52

Pulse input 2 - (White) 53

Cable specification

Pulse input cables <10 m

To ensure IP protection class connecting cable outer

jackets must be Ø4.2 ± 0.1 mm

Communication cables delivered with heat meter.

Cable ends are stripped with crimped ferule. 1.0 m

10 | © Danfoss | Energy Meters | 2017.03 VUIGB702

Installation & User Guide SonoSelect and SonoSafe

2.7 Installation of module/cable

Before handling module

PCB ensure relevant ESD

regulations are observed

(IEC 61340-5-1).

Break wired seal for

enclosure.

Cut rubber parallel to enclosure.

Insert module follow-

ing guide on PCBA

cover.

Insert cable through

hole, connect cable

and fix to screw termi-

nals matching color

and terminal numbers.

Fix cable(s) to cable

relief. Outer jacket

no longer than 9 mm

from cable relief (line).

Press down.

Close enclosure making sure that no cables inter-

fere with rubber sealing and other internal parts.

Click!

Reset tamper alarm via Sono-

App for SonoSelect 10.

For module configuration, see

SonoApp user guide.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Danfoss Messgerät Handbücher

Danfoss

Danfoss AKS 4100 Bedienungsanleitung

Danfoss

Danfoss SonoMeter 30 Bedienungsanleitung

Danfoss

Danfoss SONO 3500 CT Bedienungsanleitung

Danfoss

Danfoss SonoMeter 30 Bedienungsanleitung

Danfoss

Danfoss ADAP-KOOL AK-LM 340 Bedienungsanleitung

Danfoss

Danfoss AK-EM 100 Bedienungsanleitung

Danfoss

Danfoss SonoSensor 30 Bedienungsanleitung

Danfoss

Danfoss VLT Bedienungsanleitung

Danfoss

Danfoss 40 Gebrauchs- und Pflegehandbuch

Danfoss

Danfoss AK-SM 350 Bedienungsanleitung

Danfoss

Danfoss SonoMeter 30 Bedienungsanleitung

Danfoss

Danfoss SonoSafe Bedienungsanleitung

Danfoss

Danfoss Supercal 5 Bedienungsanleitung

Danfoss

Danfoss WS 403 Handbuch

Danfoss

Danfoss PR-SC4K Modbus Bedienungsanleitung

Danfoss

Danfoss Infocal 9 Bedienungsanleitung

Danfoss

Danfoss Micromon Bedienungsanleitung

Danfoss

Danfoss PR-SC4K Direct Bedienungsanleitung

Danfoss

Danfoss SonoCollect 110 Bedienungsanleitung

Danfoss

Danfoss 40 Bedienungsanleitung

Danfoss

Danfoss MAGFLO MAG 1100 Bedienungsanleitung

Danfoss

Danfoss PR-SC4K Modbus Bedienungsanleitung

Danfoss

Danfoss Vickers Target-Pro 2 Bedienungsanleitung

Danfoss

Danfoss SonoMeter 30 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung