Danfoss FP735Si Bedienungsanleitung

User Guide

Danfoss Heating

MAKING MODERN LIVING POSSIBLE

FP735Si

Electronic 3-Channel Full Programmer for

Heating and Hot Water with Service Interval Timer

FP735SI

FP735Si

Electronic 3-Channel Full Programmer for

Heating and Hot Water with

Service Interval Timer

For a large print version of these instructions

please call Marketing on 0845 121 7400.

Danfoss can accept no responsibility for possible errors in catalogues, brochures, and other

printed material. All trademarks in this material are property of the respective companies.

Certification Mark

Danfoss Heating 3

Thank you for buying a Danfoss product GB

FP735SI

GBGB

User Instructions

FP735Si

Electronic 3-Channel Full Programmer

Index

1.0 User Instructions .......................................................................................6

1.1 Display ...............................................................................................6

1.2 Preset programmes.......................................................................7

1.3 Before you start ..............................................................................7

1.4 Display preferences.......................................................................8

1.5 Setting the date and time...........................................................8

1.6 Accepting the preset programmes ...................................... 10

1.7 Before you change the preset programmes ..................... 10

1.7.1 Changing Zones.......................................................................... 11

1.7.2 Programming in 7-day mode ................................................. 12

1.7.3 Programming in 5+2 day mode ............................................ 13

1.7.4 Programming in 24 hour mode............................................. 14

1.7.5 Programming in A+B mode.................................................... 14

2.0 Advanced Functions ............................................................................. 17

2.1 Mode ............................................................................................... 17

2.2 Holiday mode............................................................................... 17

2.3 User overrides .............................................................................. 18

2.3.1 Move to next event .................................................................... 18

2.3.2 Extend by 1, 2 or 3 hours.......................................................... 19

2.3.3 Changing clock forwards and backward............................ 19

3.0 Advanced Programming..................................................................... 20

3.1 Overview of installer selectable features ........................... 20

3.1.1 Keyboard lock............................................................................... 20

4.0 Service Interval Timer.......................................................................... 20

5.0 Resetting the Unit.................................................................................. 21

6.0 INFO Button (COPY/i)............................................................................ 22

Danfoss Heating 5

GBGB

The text below has been edited and approved by the

Plain English Campaign, who has issued a Crystal Mark

to be displayed with it.

What is a Programmer?

... an explanation for householders.

Programmers allow you to set ‘On’ and ‘O’ time periods. Some

models switch the central heating and domestic hot water on and

o at the same time, while others allow the domestic hot water and

heating to come on and go o at dierent times. Set the ‘On’ and

‘O’ time periods to suit your own lifestyle. On some programmers

you must also set whether you want the heating and hot water

to run continuously, run under the chosen ‘On’ and ‘O’ heating

periods, or be permanently o.

The time on the programmer must be correct. Some types have

to be adjusted in spring and autumn at the changes between

Greenwich Mean Time and British Summer Time.

This programmer works together with the room thermostats and

the hot water thermostat. When the room and/or the hot water

has reached its set temperature, the heating will go o. Even if the

programmer has set it on.

FP735SI

GBGB Channel Status

(Event number when programming)

Channel Number

TIME

Days of Week (Numbers or Text)

1.0 User Instructions

1.1 Display

KEY TO SYMBOLS

Flame: shows when heating is on

Hourglass: shows during programming delays

Padlock: indicates keyboard is locked

Suitcase: indicates Holiday Mode is set

Clock: Timed Modes

Hand: Manual Modes

Alarm: Indicates alarm is active.

Also used for service due

3 on and 3 o events per day

2 on and 2 o events per day

1 on and 1 o event per day. All Day Mode

Timer (OFF) Mode

+ HRS: Extends function by 1, 2 or 3 hours

Timer (ON) Mode

Danfoss Heating 7

1.2 Preset Programmes

Your FP735Si comes ready programmed with a set of operating times

which often suit most people.

If you want, you can change any of these settings by following the

instructions on pages 12 to 17. First follow the steps on page 9 to set

your display preferences.

1.3 Before you start

Open the ap on the front of your

FP735Si. Using a non-metallic object,

press and release the recessed RESET

button (R/S).

NOTE: Your FP735Si features a backlight

on it’s display. Unless this has been

disabled or set to be on all the time, the

rst press of any button will cause the

backlight to come on. In order to action a

function, a repeat press of the button will

be required. All buttons will then operate

as normal until the unit is left untouched

for 2 minutes and then the next button

press will activate the backlight again.

Weekdays (Mon-Fri) Weekend (Sat-Sun)

Event Time Hot Water

and

Heating

Event Time Hot Water

and

Heating

1 06:30 1st ON 1 07:30 1st ON

2 08:30 1st OFF 2 09:30 1st OFF

3 11:30 2nd ON 3 11:30 2nd ON

4 13:30 2nd OFF 4 13:30 2nd OFF

5 16:30 3rd ON 5 16:30 3rd ON

6 22:30 3rd OFF 6 22:30 3rd OFF

FP735SI

1.5 Setting the Time and Date

Setting the correct date and time

Your FP735Si incorporates a real time clock with calendar function

that automatically changes time in both Spring and Autumn. The

time and date is set in the factory, and does not normally require

adjustment. However, should it be found necessary to adjust time or

date for any other reason refer to the following instructions.

1.4 Display Preferences

Clock display (12 or 24 hr)

Press and hold Λand + buttons for 2-3

seconds until display changes.

(AM or PM will appear in 12 hr mode)

Days of the week (numbers or text)

Press Λand –to toggle between day

numbers and text

Date

Month

Year

Danfoss Heating 9

Setting the date

Press and hold Λand PROG buttons for 3

seconds, to display date.

The YEAR number will ash, use Λor Vto

correct the year (Fig 1).

Use -or +to move to MONTH, then use Λ

or Vto correct month (Fig 2).

Use - or +to move to DATE in month,

then use Λor Vto correct day in month

(Fig 3).

If you attempt to select an invalid date

the unit will reject it and apply the nearest

valid date. It is recommended that date is

set in the order, yy/mm/dd.

Setting the correct time

After setting the date press PROG to

display the time. The time display will

ash on and o. Use the +and -buttons

to set the correct time (press and hold to

change in 10 minute increments). (Fig. 4)

Fig. 3 Fig. 4

Fig. 1 Fig. 2

FP735SI

Setting the correct day

The day of the week is set automatically

from the date. Press PROG button to

return to normal operation (RUN).

(Fig. 5)

1.6 Accepting the preset programmes

If you are happy to use the preset programmes on page 7, you do

not need to do anything else. To accept these settings just close the

front cover.

The unit is now in RUN mode (colon ashes in display) and the

heating will operate according to the preset programmes.

1.7 Before you change the preset programmes

Your installer will have set your unit to operate in either 7-day mode,

5+2 day mode or 24 hour mode. To tell which mode your unit is set

press PROG until Event 1 ashes in the display. The list of week days

at the bottom af the display indicates the chosen mode.

In 7-day mode (Fig. 7) you can

programme dierent settings for each

day of the week (see page 12).

Note: Only one day of the week is shown

in the display.

In 5+2 day mode (Fig. 8) you can enter

one set of programmes for weekdays and

another set for weekends (see page 13).

Note: Either weekdays or weekend days

are shown in the display.

Fig. 5 Fig. 6

Fig. 7 Fig. 8

Andere Handbücher für FP735Si

Inhaltsverzeichnis

Andere Danfoss Temperaturregler Handbücher

Danfoss

Danfoss ECL Comfort 210 Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 210 Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 210 Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 110 Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 210 Bedienungsanleitung

Danfoss

Danfoss AVQ PN16 Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 100M Bedienungsanleitung

Danfoss

Danfoss CP715 Si Montageanleitung

Danfoss

Danfoss ECL Comfort 210 Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 310 Bedienungsanleitung

Danfoss

Danfoss Optyma Plus OP-MPS Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 310 Bedienungsanleitung

Danfoss

Danfoss Optyma AK-RC 251 Bedienungsanleitung

Danfoss

Danfoss FHV-A Bedienungsanleitung

Danfoss

Danfoss 3060 Montageanleitung

Danfoss

Danfoss 103E7 Montageanleitung

Danfoss

Danfoss RX1 Bedienungsanleitung

Danfoss

Danfoss ECL Comfort P30 Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 210 Bedienungsanleitung

Danfoss

Danfoss FP735Si Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 110 Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 210 Bedienungsanleitung

Danfoss

Danfoss EKC 366 Bedienungsanleitung

Danfoss

Danfoss EKC 101 Bedienungsanleitung

Beliebte Temperaturregler Handbücher anderer Marken

Swegon

Swegon LUNAd MB Bedienungsanleitung

Lucky Reptile

Lucky Reptile Thermo Control II Bedienungsanleitung

SENSORMETRIX

SENSORMETRIX Argon 100 Bedienungsanleitung

Fuji Electric

Fuji Electric PXE4 Bedienungsanleitung

Yuyao gongyi

Yuyao gongyi XMT-808 series Bedienungsanleitung

Selec

Selec TC544C Bedienungsanleitung

P.W. KEY

P.W. KEY rt-208gt Bedienungsanleitung

Future Design

Future Design FDC-9200 Bedienungsanleitung

BH Thermal

BH Thermal BriskONE Bedienungsanleitung

Omron

Omron E5EX-H Bedienungsanleitung

West Control Solutions

West Control Solutions KS 45 Kurzanleitung

MCS

MCS RITC-15B Bedienungsanleitung

SMC Networks

SMC Networks Thermo-con INR-244-639 Bedienungsanleitung

eltherm

eltherm Ex-TC It Series Bedienungsanleitung

Omron

Omron C200H-TV Series Bedienungsanleitung

industrie technik

industrie technik CA1 Bedienungsanleitung

KRAL

KRAL EET 32 Bedienungsanleitung

dixell

dixell XR420C Verdrahtungsschema