Danfoss TP6000M Bedienungsanleitung

User Instructions

TP6000M & TP6000MA Electronic Programmable Room Thermostats

Product Features

• 2 or 4 programmed events each day, set by installer

• 5/2 day programming, provides dierent set of

programmes for weekend

• AM/PM or 24 hour clock display set by user

• Centigrade or Fahrenheit temperature display, set by user

•Mains powered

• Factory pre-set programmes which can be edited by user

• Built-in & remote sensor versions

LCD DISPLAY

Heating Temperature

Event Number

Thermometer Mode Indicator

Temperature Override - Up

Temperature Override - Down

Thermostat Calling for Heat

Main Display

Time or Temperature

Day of week (1 = Monday)

Keyboard

Locked

BUTTONSLCD DISPLAYS

A) Important note; Resetting the unit - To ensure correct operation press reset button

before commencing with programming.

Important note; If no buttons are pressed for two minutes the unit will automatically go

back to run mode. All changes made will be saved.

B) USER PREFERENCES

Before programming the thermostat it is recommended that the user preferences as regards

clock display and temperature scale are set. Details of the available user preferences are shown

below:

Clock display: press both - and  buttons and hold for 2 seconds to change display between

AM/PM & 24 hour. Repeat to return to original setting.

Temperature scale: to select between centigrade and farenheit temperature displays, follow

the steps below:

1. Press - and  buttons for 2 seconds to enter temperature display mode

2. Press - and + buttons for 2 seconds to change between centrigrade and farenheit display

3.Press - and  buttons for 2 seconds to change display back to time display mode prior to

programming.

Display actual room temperature: to permanently display actual room temperature press both

- and  and hold for 2 seconds. Repeat to return to time display.

C) SETTING THE TIME OF DAY AND DAY OF WEEK

1 Press PROG button to enter programming mode.

2. Press + or – buttons to adjust time of day, if in AM/PM mode remember to ensure that AM/PM

setting is correct.

3. Press PROG to move on to select current day of week.

4. Press + or - button repeatedly until correct day of week is displayed. Day 7 is Sunday.

5. Press PROG button to advance to“Programming event times and temperatures”.

D) PROGRAMMING EVENT TIMES AND TEMPERATURES

Reminder - The thermostat can be set by the installer to provide 2 or 4 programme events per

day. The thermostat provides 5-day / 2-day Programming with one set of programmes for days

1-5, (Monday to Friday), and another set of programmes for days 6-7, (Saturday and Sunday).

Reminder - If thermostat has been set by building owner or installer for 2 events per day, only

2 events can be programmed.

Reminder – The time setting of all events are made in increments of 10 minutes.

Setting the time and temperatures events for Days 1-5.

1. Press + or – buttons to adjust event time for event 1.

plus 

plus

plus 

PROG

then

plus 

then

plus 

RESET

BUTTONSLCD DISPLAYS

2. Press PROG to advance to temperature setting.

3. Press  or  buttons to adjust heating temperature

OPTIONAL: If heating is not required, “O”can be selected below 5°C.

Press PROG button to move onto event 2 programming and follow details below:

1. Press + or – buttons to adjust event time.

2. Press PROG to advance to temperature setting.

3. Press  or  buttons to adjust heating temperature

OPTIONAL: If heating is not required, “O”can be selected below 5°C.

Press PROG button to move onto next event 3 programming and follow details below:

1. Press + or – buttons to adjust event time.

2. Press PROG to advance to temperature setting.

3. Press  or  buttons to adjust heating temperature

OPTIONAL: If heating is not required, “O”can be selected below 5°C.

Press PROG button to move onto next event 4 programming and follow details below:

1. Press + or – buttons to adjust event time.

2. Press PROG to advance to temperature setting.

3. Press  or  buttons to adjust heating temperature

OPTIONAL: If heating is not required, “O”can be selected below 5°C.

Press PROG to advance to programming of days 6 & 7.

Setting the time and temperatures events for Days 6-7.

1. Press + or – buttons to adjust event time.



PROG



PROG



PROG



PROG



PROG

then

BUTTONSLCD DISPLAYS

2. Press PROG to advance to temperature setting.

3. Press  or  buttons to adjust heating temperature

OPTIONAL: If heating is not required, “O”can be selected below 5°C.

Press PROG button to move onto event 2 programming and follow details below.

1. Press + or – buttons to adjust event time.

2. Press PROG to advance to temperature setting.

3. Press  or  buttons to adjust heating temperature

OPTIONAL: If heating is not required, “O”can be selected below 5°C.

Press PROG button to move onto next event 3 programming and follow details below:

1. Press + or – buttons to adjust event time.

2. Press PROG to advance to temperature setting.

3. Press  or  buttons to adjust heating temperature

OPTIONAL: If heating is not required, “O”can be selected below 5°C.

Press PROG button to move onto next event 4 programming and repeat steps F1 – F3 above.

1. Press + or – buttons to adjust event time.

2. Press PROG to advance to temperature setting.

3. Press  or  buttons to adjust heating temperature

OPTIONAL: If heating is not required, “O”can be selected below 5°C.

PROG



then



PROG

then



PROG

then



PROG

then

BUTTONSLCD DISPLAYS

DAILY USE INSTRUCTIONS

E) TEMPORARY CHANGES TO PROGRAMMED TEMPERATURES

Press either  or  buttons to view programmed temperatues.

Note: If O is selected this option does not operate.

Then use  button to temporarily raise temperature, a  symbol will appear in the LCD dis-

play.

Or use  button to temporarily lower temperature, a  symbol will appear in the LCD display.

Reminder - Limited temperature adjustment:The amount of temperature adjustment may have

been limited by the building owner or the installer.

Reminder - Automatic cancellation of overrides: Any temporary override of temperature is

cancelled at the next event.

F) SELECTING WEEKEND INTO WEEKDAY OVERRIDE

Week-end into week day override

To temporarily copy weekend programmes into weekdays press both  and  buttons together

and hold down for 2 seconds.

To cancel the weekend into weekday override press both  and  buttons twice.

Advice:

During weekdays, this allows weekend programmes to be temporarily be copied into the current

day. The programme reverts to normal operation at the end of the day.

G) SELECTING THERMOSTAT MODE

Thermostat mode options

Programmes can be permanently overridden by selectingTHERMOSTAT mode, this feature is used

if xed temperatures are required for extended periods of operation.

1. To enter THERMOSTAT mode press both  and  buttons together and hold down for 2

seconds to enter WEEKDAY into WEEK END override.

2. Press both  and  buttons together for a second time and hold down for 2 seconds to enter

THERMOSTAT mode. The default setting is heat only.

3. Once in THERMOSTAT mode it is possible to select the required heating temperatures and the

thermostat operating mode, see below for setting details.

4. Use  or  buttons to select required heating temperature.

Advice: THERMOSTAT mode can be cancelled at any time by pressing both and buttons

together and holding down for 2 seconds. This will return the unit to normal running mode.







and



and



and

then



and

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to

products already on order provided that such alterations can be made without subsequent changes being necessary in specications already agreed.

Part No. 33074v07 07/07

Danfoss Randall Ltd

Ampthill Road,

Bedford, MK42 9ER

Tel: 01234 364621 Fax: 01234 219705

Email: danfossrandall@danfoss.com

Website: www.danfoss-randall.co.uk

Event Setting Time/ temp Days 1-5 Days 6-7

Time: 6:30 7:30

Temp. Heat: 20.0°C 20.0°C

User Time:

Temp. Heat:

Factory Time: 8:30 9:30

Temp. Heat: 15.0°C 20.0°C

User Time:

Temp. Heat:

Factory Time: 16:30 16:30

Temp. Heat: 21.0°C 21.0°C

User Time:

Temp. Heat:

Factory Time: 22:30 22:30

Temp. Heat: 15.0°C 15.0°C

User Time:

Temp. Heat:

OTHER FEATURES AND FUNCTIONS

H) DISPLAYING ROOM TEMPERATURE

To enter thermometer mode to display current room temperature press both - and  buttons

and hold for 2 seconds. To return to time display repeat press and hold operation.

! Remember - the unit will revert to time display after Programming or Advanced Programming

Mode has been entered.

Reminder – Whilst in thermometer mode if the display ashes a row of bars the measured

temperature exceeds the display limit.

I) RESETTING THE THERMOSTAT MEMORY

Caution – Returns thermostat to factory settings: This should only be carried out should the

performance of the thermostat become erratic, this is only likely to happen as a result of severe

electro-magnetic interference such as a lightening storm.

To reset clock and re-start the thermostats micro-processor press the RESET button. After doing

this the thermostat must be re-programmed.

J) SETTING RECORD

BUTTONSLCD DISPLAYS

-

plus

RESET

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Danfoss Thermostat Handbücher

Danfoss

Danfoss LX205T Bedienungsanleitung

Danfoss

Danfoss RET2000B-RF + RX1-S Bedienungsanleitung

Danfoss

Danfoss FP715Si Bedienungsanleitung

Danfoss

Danfoss DEVIreg 530 Bedienungsanleitung

Danfoss

Danfoss DEVIreg 316 Bedienungsanleitung

Danfoss

Danfoss FP975 Bedienungsanleitung

Danfoss

Danfoss FP715Si Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 210 Bedienungsanleitung

Danfoss

Danfoss ST-D1 Bedienungsanleitung

Danfoss

Danfoss TP4000 Range Bedienungsanleitung

Danfoss

Danfoss RET2000B-RF + RX1-S Bedienungsanleitung

Danfoss

Danfoss MTD Montageanleitung

Danfoss

Danfoss MBC 8000 Bedienungsanleitung

Danfoss

Danfoss BasicPlus2 WT-DM Bedienungsanleitung

Danfoss

Danfoss TPOne-M Bedienungsanleitung

Danfoss

Danfoss ECtemp 531 Bedienungsanleitung

Danfoss

Danfoss RT51 Bedienungsanleitung

Danfoss

Danfoss RET230P Bedienungsanleitung

Danfoss

Danfoss HC6000 Bedienungsanleitung

Danfoss

Danfoss RET-B Bedienungsanleitung

Danfoss

Danfoss TP7001 series Bedienungsanleitung

Danfoss

Danfoss GreenCon RC-T2 Bedienungsanleitung

Danfoss

Danfoss RA 2000 valve Bedienungsanleitung

Danfoss

Danfoss 088L5130 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung