DAPAudio IEM-100 Beltpack Bedienungsanleitung

IEM-100

ORDERCODE D147079

D147082

Congratulations!

You have bought a great, innovative product from DAP Audio.

The DAP Audio IEM-100 brings excitement to any venue.

You can rely on DAP Audio, for more excellent audio products.

We design and manufacture professional audio equipment for the entertainment industry.

New products are being launched regularly. We work hard to keep you, our customer, satisfied.

For more information: iwant@dap-audio.info

You can get some of the best quality, best priced products on the market from DAP Audio.

So next time, turn to DAP Audio for more great audio equipment.

Always get the best -- with DAP Audio !

Thank you!

DAP Audio

DAP Audio IEM-100™ Product Guide

Warning...................................................................................................................................................................

Safety-instructions.............................................................................................................................................

Operating Determinations...............................................................................................................................

Description..............................................................................................................................................................

Features..............................................................................................................................................................

Overview............................................................................................................................................................

Frontside.............................................................................................................................................................

Backside.............................................................................................................................................................

Transmitter..........................................................................................................................................................

Installation...............................................................................................................................................................

Set Up and Operation............................................................................................................................................

Set Up.................................................................................................................................................................

Inserting/replacing the battery.......................................................................................................................

Adjusting the squelch threshold......................................................................................................................

Tips for achieving maximum performance....................................................................................................

Frequency ranges..................................................................................................................................................

Declaration of conformity.....................................................................................................................................

Connection Cables..............................….......................................………..………….…….………….…...............

Maintenance………..............................….......................................………..………….…….………….…...............

Troubleshooting………..............................…................................………..………….…….………….…..................

Product Specifications.................................................................……………….…….…………………..................

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOUR INITIAL START-UP!

SAFETY INSTRUCTIONS

Every person involved with the installation, operation and maintenance of this device has to:

-be qualified

-follow the instructions of this manual

Before your initial start-up, please make sure that there is no damage caused by transportation. Should

there be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to

follow the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the device are not subject to

warranty.

This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-

observance of this manual or any unauthorized modification to the device.

Never let the power-cord come into contact with other cables! Handle the power-cord and all

connections with the mains with particular caution!

Never remove warning or informative labels from the unit.

Never use anything to cover the ground contact.

Never leave any cables lying around.

Do not open the device and do not modify the device.

Do not insert objects into air vents.

Do not connect this device to a dimmerpack.

Do not switch the system on and off in short intervals, as this would reduce the system’s life.

Do not drive the inputs with a signal level bigger, than required to drive the equipment to full

output.

Do not plug Mics into the console (or stagebox) while Phantom Power is on. Also mute the monitor

/ Pa system when turning Phantom Power on or off. Allow the system to adjust for a couple of

seconds, before setting the input gains.

Only use device indoor, avoid contact with water or other liquids.

Avoid flames and do not put close to flammable liquids or gases.

Always disconnect power from the mains, when device is not used or before cleaning! Only

handle the power-cord by the plug. Never pull out the plug by tugging the power-cord.

Always operate the unit with the AC ground wire connected to the electrical system ground.

Make sure you don’t use the wrong kind of cables or defective cables.

Make sure that the signals into the mixer are balanced, otherwise hum could be created.

Make sure you use DI boxes to balance unbalanced signals; All incoming signals should be clear.

CAUTION!

Keep this device away from rain and moisture!

CAUTION! Be careful with your operations.

With a dangerous voltage you can suffer

a dangerous electric shock when touching the wires!

Make sure that the available voltage is not higher than stated on the rear panel.

Make sure that the power-cord is never crimped or damaged. Check the system and the power-

cord from time to time.

In system setup, the amplifier's output power must be 50%-100% more than the loaded

loudspeakers rated power.

Please turn off the power switch, when changing the power cord or signal cable, or select the

input mode switch.

Extreme frequency boosts in connection with a high input signal level may lead to overdriving

your equipment. Should this occur, it is necessary to reduce the input signal level by using the

INPUT control.

To emphasize a frequency range, you don’t necessarily have to move its respective sliding control

upward; try lowering surrounding frequency ranges instead. This way, you avoid causing the next

piece of equipment in your sound path to overdrive. You also preserve valuable dynamic reserve

(“headroom”)

Avoid ground loops! Always be sure to connect the power amps and the mixing console to the

same electrical circuit to ensure the same phase!

If system is dropped or struck, disconnect mains power supply immediately. Have a qualified

engineer inspect for safety before operating.

If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do

not switch it on immediately. The arising condensation water might damage your system. Leave

the system switched off until it has reached room temperature.

If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit

securely (preferably in the original packing material), and return it to your Dap Audio dealer for

service.

Repairs, servicing and electric connection must be carried out by a qualified technician.

For replacement use fuses of same type and rating only.

WARRANTY: Till one year after date of purchase.

OPERATING DETERMINATIONS

This device is not designed for permanent operation. Consistent operation breaks will ensure that the

device will serve you for a long time without defects.

If this device is operated in any other way, than the one described in this manual, the product may suffer

damages and the warranty becomes void.

Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash

etc.

You endanger your own safety and the safety of others!

Improper installation can cause serious damage to people and property !

Description of the device

Features

The IEM-100 is a Wireless In Ear Monitor Set from Dap Audio.

• UHF-band PLL Synthesized design.

• Frequency agility over a 25MHz bandwith, with 48 pre-programmed frequencies avaiable.

• Built-in limiter circuitry eliminates distortion under excessive input levels.

• Front panel monitoring headphone jack

• Dual-antenna true diversity receiver, eliminating signal dropout and enhancing RF stability.

Overview

Fig. 1

1. Power switch

Turns transmitter on or off.

2. Headphone out jack

To connect a monitoring headphone.

3. Headphone volume control

Used to adjust the headphone volume level.

4. Limit indicator L

Lights if the incoming signal (Left/ channel 1)exceeds the limiting threshold.

5. Display

6. Limit indicator R

Lights if the incoming signal (Right/ channel 2)exceeds the limiting threshold.

7. Menu button

8. Up button

9. Set button

10. Down button

Fig. 2

11. Antenna

12. XLR balanced Audio Out connector

13. ¼” Phone jack audio Input connector (Unbalanced High Z).

14. Gain Switch

Used to set the input sensitivity.

15. Power input connector.

Please use the supplied AC adapter only.

Fig. 3

1. Left Antenna/ Squelch indicator

2. Display

3. Antenna’s

4. Power on/off and volume control

5. Balance control

6. Right Antenna/ Squelch indicator

7. Set button

8. Up button

9. Down button

10. Belt clip

11. Headphone jack

Installation

Remove all packing materials from the IEM-100. Check that all foam and plastic padding is removed.

Always disconnect from electric mains power supply before cleaning or servicing.

Damages caused by non-observance are not subject to warranty.

Set Up and Operation

Before plugging the unit in, always make sure that the power supply matches the product specification

voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.

Transmitter Control

Fig. 3

1. Level audio left/ channel 1

2. Level audio right/ channel 2

3. Transmission power

4. Limiter on/ off

5. Channel

6. Frequency

Frequency setting: Press the SETbutton to enter the setting state. Now press the MENU button until

the display of frequency/channel is flashing (see Figure 4). Use the up/down buttons to set the

proper frequency.

Fig. 4

Volume limiter setting: Press the SET button to enter the seting state. Hold down the MENU

button until the Limit indicator is flashing (see Figure 5). Now use the up / down button to switch

the limiter on or off.

Indicates that the limiter function is switched in.

Indicates that the limiter function is switched off.

Fig. 5

Transmission power setting: Press the SET button to enter the seting state. Hold down the MENU

button until the transmission power indicator is flashing (see Figure 6). Use the up/down buttons to

adjust the transmission power.

Fig. 6

Note: If no button is pressed for 3 seconds, the system will automaticly exit the setting state and

save the current setting.

Transmitter Functions

Limiter function:

If the limiter is switched on, the volume will automatically be decreased if the value rises

above the set threshold. This in order to avoid distortion and protect your ears.

Power:

RF-power 10dBM (10mW)

RF-power 15dBM (31,62mW)

RF-power 20dBM (100mW)

Gain control of input level:

Set the switch in the +10dB position for low output equipement.

Receiver control

Audio Left/ Right Control.

Rotate the Audio Control knob for adjusting the balance between Audio Left/ Right or Channel

1/2. In Mid position the Audio Left and Right are set to the same volume level.

Fig. 7

ON/OFF/VOLUME Control.

Rotate the ON/OFF/VOLUME knob to adjust the volume.

Frequency/ Channel Setting.

Press the up or down button until the Frequency/ Channel starts flashing, you’re now in the setting

state.

a.Press the SET button to switch between Frequency and Channel.

b.Use the up/down buttons to set the desired Frequency/ Channel.

Fig. 8

Receiver Setting

Press the SET button to switch between MIX, LIM, SQL and EQ.

MIX/ Stereo Output Setting: Use the SET button until MIX is flashing( see Figure 9). Use the Up or

Down button to switch the MIX function on or off.

Means MIX mode is selected.

Means STEREO Mode is selected.

Volume Limiter Setting: Press the SET button until LIM is flashing (Figure 10).

Means LIM mode is switched in.

Means LIM Mode is switched off.

Fig. 10

Andere Handbücher für IEM-100 Beltpack

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere DAPAudio Messgerät Handbücher

DAPAudio

DAPAudio 91004 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung