Datalogic DS6300 Handbuch

DS6300

INSTALLATION QUICK REFERENCE

CONTENTS

DS6300-100-010 MASTER/SLAVE MODELS.........................................................................................................1

DS6300-100-011 PROFIBUS MODELS ..................................................................................................................7

DS6300-100-012 ETHERNET MODELS................................................................................................................12

DS6300-100-015 DEVICENET MODELS ..............................................................................................................17

DS6300-105-0XX OSCILLATING MIRROR MODELS ..........................................................................................22

COMMON FEATURES ..........................................................................................................................................24

NOTE

For further details on product installation, see the complete Reference Manual available on the

configuration CD-ROM included with this product.

DS6300 MASTER/SLAVE

Figure A

Laser Beam Output Window

Figure B

Programming Keypad

Phase On LED (Yellow)

TX Data LED (Green)

Power On LED (Red)

LCD Display

Figure C

Main/Aux. Interface 25-pin D-sub Male Connector

Lonworks 9-pin Male Connector

Lonworks 9-pin Female Connector

Available Models:

Optical Model

0 = Standard

5 = Oscillating Mirror

Decoder Model

10 = Master/Slave

11 = Profibus

12 = Ethernet

15 = Devicenet

DS6300 - 10X - 0Y

Technical Features:

ELECTRICAL FEATURES OPTICAL FEATURES

Supply Voltage 15 - 30 Vdc Light Receiver Avalanche photodiode

Wavelength 630 to 680 nm

Power

Consumption 15 W typical

20 W Max. (including startup current)

Main (isolated) Baud Rate Safety Class Class 2-EN 60825-1;

Class II-CDRH

RS232

RS485 full-duplex

Laser Control Security system to turn laser

off in case of motor slow down

RS485 half-duplex

1200 to 115200 READING FEATURES

20 mA C.L. (INT-30

with C-BOX 100 only) 19200 Scan Rate 600-1200 scans/s

Auxiliary

RS232 1200 to 11520

Other

Communication

Interfaces

Lonworks 1,25 Mb/s

Inputs

Max. Resolution

Max. Read. Distance

Max. Read. Width

Max. Depth of Field

(see reading diagram)

USER INTERFACE

Ext. Trigger 1,

3 aux. digital

inputs (optocoupled NPN or PNP) LCD Display 2 lines by 16 characters LCD

Outputs Keypad 3 keys

LED Indicators

3 software

programmable

digital outputs (optocoupled)

Power ON (red color)

Phase ON (yellow color)

TX Data (green color)

5 2

DS6300 MASTER/SLAVE

SOFTWARE FEATURES ENVIRONMENTAL FEATURES

Interleaved 2/5

Readable Codes Code 39 standard Operating

Temperature 0° to +40 °C (+32 to +104 °F)

Codabar

Code 128 Storage

Temperature -20° to +70 °C (-4° to +158 °F)

EAN 128 Humidity 90% non condensing

Code 93 (standard & full ASCII)

EAN/UPC Vibration

Resistance IEC 68-2-6 test FC

1.5 mm; 10 to 55 Hz

Code Selection Up to 10 codes during one 2 hours on each axis

reading phase Shock Resistance IEC 68-2-27 test EA

Headers and Up to 128-byte headers and 30 G; 11 ms

Terminators 128-byte terminators 3 shocks on each axis

Operating Modes On Line, Automatic, Test, Protection Class IP64

Config. Mode Genius™ utility program PHYSICAL FEATURES

Std Models Oscill. Mirror

Dimensions mm

(inch) 110x113x99

(4.33x4.45x3.9)

113x180x104.5

(4.45x7.08x4.11)

Parameter Storage Non-volatile internal FLASH

Weight 1.5 kg (3.3 lb) 2.0 kg (4.4 lb)

Accessories:

Name Description Part Number

CAB-6001 Cable to C-BOX100 1 m 93A051190

CAB-6002 Cable to C-BOX100 2 m 93A051200

CAB-6005 Cable to C-BOX100 5 m 93A051210

CAB-6010 Cable to C-BOX100 10 m 93A051271

CAB-6101 Cable master/slave 1 m 93A051220

CAB-6102 Cable master/slave 2 m 93A051230

CAB-6105 Cable master/slave 5 m 93A051240

CAB-6112 Cable master/slave no power 2 m 93A051224

CAB-6115 Cable master/slave no power 5 m 93A051225

CAB-6305 Power cable Fam 6k 5 m 93ACC1768

CAB-6310 Power cable Fam 6k 10 m 93ACC1752

C-BOX 100 Passive connection box 93ACC1510

INT-30 20 mA C.L. interface board for C-BOX 100 93A151022

GFC-60 90° mirror 93A201100

GFC-600 90° mirror close distance 93A201102

GFX-60 X-pattern mirror 93ACC1730

PWR-120 Power unit 110/230 V AC - 24 V DC 93ACC1530

BTK-6000 Terminator kit (5 pcs) 93ACC1710

PG6002 Single unit power supply – US 93ACC1718

PG6001 Single unit power supply – UK 93ACC1719

PG6000 Single unit power supply – EU 93ACC1720

FBK-6000 Fast bracket kit (2 pcs) 93ACC1721

US-60 Mounting bracket kit (5 pcs) for multisided stations 93ACC1729

MEP-542 Photocell kit - PNP 93ACC1727

MEP-543 Photocell kit - NPN 93ACC1728

Electrical Connections:

The DS6300 reader provides a 25-pin male D-sub connector for connection to power supply, Host interface (Main

and Aux), and input/output signals.

Two 9-pin connectors provide access to the scanner’s local Lonworks network used for both input and output

connections to build a multi-sided or omni-station system.

DS6300 MASTER/SLAVE

The details of the connector pins are indicated in the following table:

25-pin D-Sub Connector Pinout

Pin Name Function

1 Shield Internally connected by capacitor to chassis

20 RXAUX Receive data of auxiliary RS232 (referred to GND)

21 TXAUX Transmit data of auxiliary RS232 (referred to GND)

8 OUT 1+ Configurable digital output 1 – positive pin

22 OUT 1- Configurable digital output 1 – negative pin

11 OUT 2+ Configurable digital output 2 – positive pin

12 OUT 2- Configurable digital output 2 – negative pin

16 OUT 3A Configurable digital output 3 – polarity insensitive

17 OUT 3B Configurable digital output 3 – polarity insensitive

18 EXT_TRIG A External trigger (polarity insensitive)

19 EXT_TRIG B External trigger (polarity insensitive)

6 IN2A Input signal 2 (polarity insensitive)

10 IN2B Input signal 2 (polarity insensitive)

14 IN3A Input signal 3 (polarity insensitive)

15 IN4A Input signal 4 (polarity insensitive)

24 IN_REF Common reference of IN3 and IN4 (polarity insensitive)

9, 13 VS Supply voltage – positive pin

23, 25 GND Supply voltage – negative pin

25-pin male D-sub Connector

Pin RS232 RS485 Full-Duplex RS485 Half-Duplex 20 mA C.L.

(INT-30 with C-BOX 100 only)

2 TX TX485+ RTX485+

3 RX RX485+

4 RTS TX485- RTX485-

5 CTS RX485-

7 GND_ISO GND_ISO GND_ISO

see INT-30 instructions

* For 20 mA C.L. connections, GND is the same of the scanner power supply.

9-pin Lonworks Connector Pinout

Pin Name Function

1 Shield Cable shield

9 VS Supply voltage – positive pin

2 GND Supply voltage – negative pin

6 VS_I/O Supply voltage of I/O circuit

3 Ref_I/O Reference voltage of I/O circuit

4 SYS_ENC_I/O System signal

5 SYS_I/O System signal

7 LON A Lonworks line (polarity insensitive)

8 LON B Lonworks line (polarity insensitive)

Female

Male

9-pin Local Lonworks Connectors

Network Termination:

When building a local Lonworks system the network must be properly terminated by positioning a BTK-6000

terminator on the DS6300 master reader (BTK-6000 female side) and on the last slave reader (BTK-6000 male

side).

BTK-6000 Network Terminator

to Master

9-pin female

to Slave

9-pin male

DS6300 MASTER/SLAVE

Connectivity:

Point-to-Point Layout

* C-BOX 100 can support up to 2 DS6300 readers. Please contact Datalogic USS Technical Support, if your

application requires a multi-slave network.

** P.S. (Presence Sensor) connected to External Trigger input.

Pass Through Layout

ENT

* P.S. (Presence Sensor) connected to External Trigger input.

1 2

Main Serial Interface

uxiliary Serial Interface

DS4600A

AUX

C-BOX 100

Local Host

PWR-120

DS6300

*P.S.

DS4600A

Gryphon

C-BOX 100

*P.S.

MAIN

C-BOX 100

*P.S.

CAB-600X

2 2

DS6300

* C-BOX 100

CAB-600X

PG6000

Local Host

**P.S.

DS6300 MASTER/SLAVE

Multiplexer Layout

ENT

1 RS485 HD Main Interface

Local Lonworks Network (Single P.S.)

Single P.S. with 2 Readers

* P.S. (Presence Sensor) connected to External Trigger input.

Master

CAB-600X

CAB-610X

Slave 1 Local Host

C-BOX 100

PG6000

BTK-6000

*P.S.

DS4600A

C-BOX 100

Local Host

DS6300

*P.S.

DS4600A

C-BOX 100

*P.S.

C-BOX 100

*P.S.

PWR-120

MX4000

#31 #0

CAB-600X

DS6300 MASTER/SLAVE

Local Lonworks Network (Single P.S.)

Single P.S. with more than 2 Readers and Multiple Power Units

Local Lonworks Network (Single P.S.)

Single P.S. with more than 2 Readers and Single Power Unit

* P.S. (Presence Sensor) connected to External Trigger input.

Master

CAB-600X

CAB-610X

Slave 1

Slave 2

Local Host

C-BOX 100

PG6000

CAB-610X

BTK-6000

**P.S.

CAB-611X

Slave 3

C-BOX 100

PG6000

CAB-600X

Master

CAB-600X

CAB-611X

Slave 1

Slave 2

Slave 3

Local Host

C-BOX 100

PWR-120

CAB-610X

CAB-610X BTK-6000

BTK-6000

*P.S.

Slave 4

CAB-610X

CAB-63XX

DS6300 PROFIBUS

Figure A

Laser Beam Output Window

Figure B

Programming Keypad

Phase On LED (Yellow)

TX Data LED (Green)

Power On LED (Red)

LCD Display

Figure C

Profibus 9-pin Female Connector (white)

Lonworks 9-pin Female Connector

Main/Aux. Interface 26-pin D-Sub Male Connector

Available Models:

Optical Model

0 = Standard

5 = Oscillating Mirror

Decoder Model

10 = Master/Slave

11 = Profibus

12 = Ethernet

15 = Devicenet

DS6300 - 10X - 0Y

Technical Features:

ELECTRICAL FEATURES OPTICAL FEATURES

Supply Voltage 15 - 30 Vdc Light Receiver Avalanche photodiode

Wavelength 630 to 680 nm

Power

Consumption 15 W typical

20 W Max. (including startup current)

Main (isolated) Baud Rate Safety Class Class 2-EN 60825-1;

Class II-CDRH

RS232

RS485 full-duplex Laser Control Security system to turn laser

off in case of motor slow down

RS485 half-duplex

1200 to 115200 READING FEATURES

20 mA C.L. (INT-30

with C-BOX 100 only) 19200 Scan Rate 600-1200 scans/s

Auxiliary

RS232 1200 to 11500

Other

Lonworks 1,25 Mb/s

Communication

Interfaces

Profibus 12 Mb/s

Inputs

Max. Resolution

Max. Read. Distance

Max. Read. Width

Max. Depth of Field

(see reading diagram)

USER INTERFACE

Ext. Trigger 1,

3 aux. digital

inputs (optocoupled NPN or PNP) LCD Display 2 lines by 16 characters LCD

Outputs Keypad 3 keys

LED Indicators

3 software

programmable

digital outputs (optocoupled)

Power ON (red color)

Phase ON (yellow color)

TX Data (green color)

DS6300 PROFIBUS

SOFTWARE FEATURES ENVIRONMENTAL FEATURES

Interleaved 2/5

Readable Codes Code 39 standard Operating

Temperature 0° to +40 °C (+32 to +104 °F)

Codabar

Code 128 Storage

Temperature -20° to +70 °C (-4° to +158 °F)

EAN 128 Humidity 90% non condensing

Code 93 (standard & full ASCII)

EAN/UPC Vibration

Resistance IEC 68-2-6 test FC

1.5 mm; 10 to 55 Hz

Code Selection Up to 10 codes during one 2 hours on each axis

reading phase Shock Resistance IEC 68-2-27 test EA

Headers and Up to 128-byte headers and 30 G; 11 ms

Terminators 128-byte terminators 3 shocks on each axis

Protection Class IP50

Operating Modes On Line, Automatic, Test, PHYSICAL FEATURES

Config. Mode Genius™ utility program Std Models Oscill. Mirror

Dimensions mm

(inch) 110x113x99

(4.33x4.45x3.9)

113x180x104.5

(4.45x7.08x4.11)

Parameter Storage Non-volatile internal FLASH

Weight 1.5 kg (3.3 lb) 2.0 kg (4.4 lb)

Accessories:

Name Description Part Number

CAB-6011 Cable to C-BOX100 1 m 93A051221

CAB-6012 Cable to C-BOX100 2 m 93A051222

CAB-6015 Cable to C-BOX100 5 m 93A051223

C-BOX 100 Passive connection box 93ACC1510

INT-30 20 mA C.L. interface board for C-BOX 100 93A151022

GFC-60 90° mirror 93A201100

GFC-600 90° mirror close distance 93A201102

GFX-60 X-pattern mirror 93ACC1730

PWR-120 Power unit 110/230 V AC - 24 V DC 93ACC1530

BTK-6000 Terminator kit (5 pcs) 93ACC1710

PG6002 Single unit power supply – US 93ACC1718

PG6001 Single unit power supply – UK 93ACC1719

PG6000 Single unit power supply – EU 93ACC1720

FBK-6000 Fast bracket kit (2 pcs) 93ACC1721

US-60 Mounting bracket kit (5 pcs) for multisided stations 93ACC1729

MEP-542 Photocell kit – PNP 93ACC1727

MEP-543 Photocell kit – NPN 93ACC1728

Electrical Connections:

The DS6300 Ethernet reader provides a 26-pin male D-sub connector for connection to power supply and

input/output signals.

An Ethernet connector is used for connection to the remote Host (for ex. Remote PC connected via Internet),

while a local Lonworks 9-pin female connector connects the Ethernet master to the first slave reader of the

system.

The details of the connector pins are indicated in the following table:

Andere Handbücher für DS6300

Inhaltsverzeichnis

Andere Datalogic Barcode-Lesegerät Handbücher

Datalogic

Datalogic Gryphon I GBT/GM4200 Series Bedienungsanleitung

Datalogic

Datalogic Gryphon GFS4100 Installations- und Betriebshandbuch

Datalogic

Datalogic QuickScan QD2131 Bedienungsanleitung

Datalogic

Datalogic PowerScan RF SR Bedienungsanleitung

Datalogic

Datalogic DX6400 Bedienungsanleitung

Datalogic

Datalogic QuickScan Lite QW2100 Bedienungsanleitung

Datalogic

Datalogic Cobalto CO5330 Installations- und Betriebshandbuch

Datalogic

Datalogic QuickScan L QD 2300 Bedienungsanleitung

Datalogic

Datalogic GRYPHON BT100 Bedienungsanleitung

Datalogic

Datalogic Gryphon I GD44XX Bedienungsanleitung

Datalogic

Datalogic DS2100A Bedienungsanleitung

Datalogic

Datalogic Gryphon GM44XX Bedienungsanleitung

Datalogic

Datalogic Gryphon-HC Series Bedienungsanleitung

Datalogic

Datalogic GFC-800 Bedienungsanleitung

Datalogic

Datalogic Magellan 2200VS Installations- und Betriebshandbuch

Datalogic

Datalogic QuickScan QS6500BT Bedienungsanleitung

Datalogic

Datalogic QuickScan QM2430-BK-433K2 Bedienungsanleitung

Datalogic

Datalogic QuickScan QBT24XX Bedienungsanleitung

Datalogic

Datalogic PowerScan PD8530 Bedienungsanleitung

Datalogic

Datalogic QuickScan Lite QW2100 Bedienungsanleitung

Datalogic

Datalogic DRAGON M SERIES Bedienungsanleitung

Datalogic

Datalogic Gryphon I GBT4400 2D Bedienungsanleitung

Datalogic

Datalogic BC9 0-BT Series Bedienungsanleitung

Datalogic

Datalogic QuickScan QD2590 Installations- und Betriebshandbuch

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung

Atid

Atid AT188N Plus Bedienungsanleitung