Datalogic Magellan 8500Xt Referenzhandbuch

Installation Procedure and Product Handling

Operator Buttons and Indicator LEDs

Diagnostic Error Display

Escalation Support Options

*Volume/Tone Button

Scale Zero Button

**EAS Button

Scan LED

EAS LED

Scale LED

Datalogic Scanning Tech Support

541-683-5700 (USA only)

6:30am - 5:00pm Pacic Time

Monday thru Friday

Contact your nearest Datalogic Support

Center. For a full listing of Datalogic

Support Centers and documentation:

www.scanning.datalogic.com

1. Unpack the Magellan 8500Xt from the shipping carton.

2. Remove the top platter and supporting foam.

3. Make necessary cable connections between the scanner/

scale, remote display, POS terminal and power source. (See

“Cabling” on the other side of this sheet.)

4. Install the scanner/scale in-counter in the orientation and

position described. Conrm scanning and weighing func-

tions.

5. Calibrate and certify the scale per state and local Weights

and Measures requirements.

6. Install the top platter, remove the protective vinyl sheet

from the glass and wipe down both windows.

When moving the unit, use the lift handles seated beneath

the top platter, down inside the chassis, and must be ro-

tated up as shown.

DO NOT ATTEMPT TO LIFT THE PRODUCT BY THE BONNET.

Magellan™ 8500Xt QUICK REFERENCE CARD

*Hold Volume/Tone Button down for 10 seconds

to reset the scanner/scale and initiate self test.

**EAS is optional (not present on all models).

The diagnostic error display is located left of the motor/

facet wheel, visible through the horizontal window.

NOTE: Error codes displayed should be supplied with unit serial number when making RMA request to manufacturer.

CODES ACTION

.0 or .1 Check POS connections & programming (see

PRG), then call Datalogic Tech Support.

.7 See “Scale Error Reporting” in PRG, then call Data-

logic Tech Support.

.8 Check Remote Display (see PRG) then call Data-

logic Tech Support.

.9 Check EAS cable, then call Datalogic Tech Support.

.C Recalibrate scale (see PRG), then call Datalogic

Tech Support.

.2 thru .6,

.A, .B, .E, (.) Call Datalogic Tech Support

See the Magellan 8500Xt Product Reference Guide (PRG) for detailed instructions on these procedures.

Cabling

Mounting

EAS

Antenna

Aux.

Port

Scale

Host

Port

POS

I/F

Remote

Scale

Display

EAS

Interlock

Power

Scanner/Scale Connector Panel

Magellan™ 8500Xt

The product must be mounted in the counter in a

stable position. Check to ensure that it does not

rock or “teeter” from side-to-side or corner-to-

corner on any axis.

NOTE:

For full product installation instructions, dimensions

and requirements, refer to the 8500Xt Product

Reference Guide (PRG), available on the Datalogic

Scanning website at www.scanning.datalogic.com

Height Adjustment

R44-3122 (Rev A)

Trailing Edge Leading Edge

Left-Hand Take-Away Installation

(reverse for Right-Hand Take-Away)

Side Rail

Scale Platter

Counter

(or Dead Plate)

Product Flow

R44-3122

Andere Handbücher für Magellan 8500Xt

Inhaltsverzeichnis

Andere Datalogic Barcode-Lesegerät Handbücher

Datalogic

Datalogic Gryphon I GD4100 Bedienungsanleitung

Datalogic

Datalogic DRAGON D101 Bedienungsanleitung

Datalogic

Datalogic Matrix 300N Bedienungsanleitung

Datalogic

Datalogic MAGELLAN 8500? Installations- und Betriebshandbuch

Datalogic

Datalogic DS4800 OM Bedienungsanleitung

Datalogic

Datalogic PowerScan PM9500-RT Bedienungsanleitung

Datalogic

Datalogic Gryphon D432E Bedienungsanleitung

Datalogic

Datalogic DLC7070 Bedienungsanleitung

Datalogic

Datalogic Gryphon GD4200 Bedienungsanleitung

Datalogic

Datalogic QuickScan Mobile Bedienungsanleitung

Datalogic

Datalogic PowerScan PD8530 Bedienungsanleitung

Datalogic

Datalogic Gryphon I GM440 Series Installations- und Betriebshandbuch

Datalogic

Datalogic DX8200A Bedienungsanleitung

Datalogic

Datalogic DS8100A Bedienungsanleitung

Datalogic

Datalogic GRYPHON BT SH3500 Bedienungsanleitung

Datalogic

Datalogic Cobalto CO5300 Bedienungsanleitung

Datalogic

Datalogic Touch 90 pro Bedienungsanleitung

Datalogic

Datalogic Compact 2D Reader Matrix-2000 Bedienungsanleitung

Datalogic

Datalogic PowerScan PBT9501-AR Bedienungsanleitung

Datalogic

Datalogic Heron D130 Bedienungsanleitung

Datalogic

Datalogic S5N-PH Series Bedienungsanleitung

Datalogic

Datalogic DX6400 Bedienungsanleitung

Datalogic

Datalogic Matrix 300 Bedienungsanleitung

Datalogic

Datalogic QUICKSCAN 6000 PLUS Betriebsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung

Atid

Atid AT188N Plus Bedienungsanleitung

AZENTA

AZENTA 281947 Bedienungsanleitung

Microscan

Microscan MS-1 Gebrauchs- und Pflegehandbuch