Datalogic SD9030 Bedienungsanleitung

SD9030 Dongle

for Datalogic Star Cordless Systems

Quick Reference Guide

Datalogic S.r.l.

Via S. Vitalino, 13

40012 - Lippo di Calderara di Reno (BO)

Italy

Telefono: +39 0513147011

Fax: +39 0513147288

of this documentation or the procedures described therein may be

reproduced or transmitted in any form or by any means without

prior written permission of Datalogic USA Inc. or its subsidiaries or

affiliates (“Datalogic” or “Datalogic USA”).

Owners of Datalogic products are hereby granted a non-exclusive,

revocable license to reproduce and transmit this documentation

for the purchaser's own internal business purposes. Purchaser

shall not remove or alter any proprietary notices, including copy-

right notices, contained in this documentation and shall ensure

that all notices appear on any reproductions of the documenta-

tion.

Should future revisions of this manual be published, you can

acquire printed versions by contacting your Datalogic representa-

tive. Electronic versions may either be downloadable from the

Datalogic website (www.datalogic.com) or provided on appropri-

ate media. If you visit our website and would like to make com-

ments or suggestions about this or other Datalogic publications,

please let us know via the "Contact Datalogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information

in this manual that is complete and accurate, however, Datalogic

reserves the right to change any specification at any time without

prior notice.

Datalogic and the Datalogic logo are registered trademarks of Dat-

alogic S.p.A. in many countries, including the U.S. and the E.U.

SD9030 Dongle is a trademark of Datalogic S.p.A. and/or its affili-

ates.

All other trademarks and brands are property of their respective

owners.

Patents

See www.patents.datalogic.com for patent list.

See the Regulatory Addendum included with your prod-

uct for additional regulatory, safety and legal informa-

tion.

Quick Reference Guide i

Table of Contents

Installation .......................................................................................2

Mounting the SD9030 Dongle ........................................................2

Mounting the SD9030 Dongle on a forklift ...................................3

Connecting to a Host ...................................................................... 4

Connecting a Datalogic PowerScan™ PM9X00 to the SD9030

Dongle ..............................................................................................4

SD9030 Dongle Configuration ........................................................5

Datalogic Aladdin™ ................................................................. 5

Serial Configuration ...............................................................5

Configuration Bar Codes ....................................................... 5

Resetting Standard Product Defaults .................................5

Selecting the Interface Type ..........................................................6

Configuring the Interface ...............................................................6

Country Mode ..................................................................................8

Technical Features ........................................................................12

Datalogic Limited Factory Warranty ...........................................12

Ergonomic Recommendations ....................................................15

Support Through the Website .....................................................15

ii SD9030 Dongle

Quick Reference Guide 1

Using the SD9030 Dongle

The SD9030 Dongle, when paired with one or more Power-

Scan™ PM9X00 readers, builds a Cordless Reading System

for the collection, decoding and transmission of bar code

data. It can be connected to a Host PC via USB and is

suited for single-cradle layouts.

When the button is pressed, the SD9030 Dongle will

transmit a "broadcast" message. When the broadcast is

sent, and the Radio RX Timeout is set to keep the radio

awake, all properly configured scanners that are linked to

that base and within radio range coverage will emit a beep

and blink for 5 seconds. This functionality is useful to:

• verify which scanner is linked to a certain base station

• detect a scanner forgotten somewhere

The backlight of the button shows the status of the

SD9030 Dongle as described by the table below.

EVENT LED

Power ON Yellow steady on

Label Programming /

Service Mode Yellow rapidly blinking

Data or label transmit-

ted to the host Yellow blinks one time

Broadcast Green rapidly blinking

Disabled by host Yellow Blinking once per sec-

ond

Firmware upgrade Green Blinking

Installation

2 SD9030 Dongle

Installation

To set up your SD9030 Dongle you must:

1. Physically install the SD9030 Dongle.

2. Make all system connections.

3. Configure the SD9030 Dongle.

Mounting the SD9030 Dongle

The package contains the following items:

The forklift mount is designed to ease the installation of

the dongle on a lateral guard or on the overhead guard of

a forklift.

The forklift mount can be easily fastened to the dongle by

following few steps:

1. Unscrew the highlighted nut at the bottom and free it

completely from the cable of the dongle. Place the nut

in a safe place.

2. Pass the cable of the dongle through the biggest hole

of the mount and hold the dongle as shown in figure.

Remember that the best radio range is achieved by

placing the antenna as far as possible from metal

parts.

Best radio range Space Saving Position

• SD9030 Dongle • 2 Adhesive linking labels

• 1 Forklift mount • SD9030 Quick Reference Guide

Mounting the SD9030 Dongle on a forklift

Quick Reference Guide 3

3. Take the nut removed at step 1, pass the cable

through it and screw it tight to the dongle again.

Mounting the SD9030 Dongle on a

forklift

By using the steel mount and a couple of plastic zip ties,

the SD9030 Dongle can be easily mounted on a guard of

the forklift as shown in the picture below.

Connecting to a Host

4 SD9030 Dongle

Connecting to a Host

The SD9030 Dongle can be connected to a Host with its

USB cable. In the picture below it is connected to a Data-

logic Vehicle Mount Computer, but it can be connected to

any PC or Industrial PC with a USB port.

Simply connect the SD9030 Dongle to a free USB port of

the Host.

Connecting a Datalogic PowerScan™

PM9X00 to the SD9030 Dongle

Simply take your Datalogic PowerScan™ PM9X00 scanner

and scan the link label on the backside of the SD9030

Dongle or scan one of the adhesive labels provided in the

package.

Restore Default Radio Protocol

By factory defaults, the SD9030 Dongle is preset to

use the STAR 2.0 High Speed protocol. To enable the

communication between a Datalogic PowerScan

STAR 2.0 Scanner and a SD9030 Dongle, please be

sure about which protocol is currently in use on

both devices. Use the barcode below in case you

need to restore the scanner with the same default

protocol used by the SD9030 Dongle.

SD9030 Dongle Configuration

Quick Reference Guide 5

SD9030 Dongle Configuration

The SD9030 configuration can be performed in three ways: by

using the Datalogic Aladdin

™

software configuration program,

by sending configuration strings from the Host PC via USB-

COM interface or by reading configuration bar codes with the

PowerScan

™

PM9X00 reader.

Datalogic Aladdin™

Datalogic Aladdin

™

is a multi-platform utility program that

provides a quick and user-friendly configuration method via

the USB-COM interface. It also allows upgrading the software

of the connected device (see the Datalogic Aladdin

™

Help On-

Line for more details).

Serial Configuration

By connecting the SD9030 Dongle to a PC through a USB-

COM interface, it is possible to send configuration strings

from the PC to the dongle.

Configuration Bar Codes

Link the SD9030 Dongle and the reader by scanning the link-

ing label attached to the dongle. Once the pairing is complete,

you can configure the SD9030 Dongle by reading configura-

tion bar codes in this manual.

To configure the SD9030 Dongle using the PowerScan

™

PM9X00 reader (paired to the dongle), follow the procedure

according to the interface selected.

Resetting Standard Product Defaults

Reference the PRG for a listing of standard factory settings. If

you aren’t sure what programming options are in your reader,

or you’ve changed some options and want the factory set-

tings restored, scan the

Standard Product Default Settings

bar code below to copy the factory configuration for the cur-

rently active interface to the current configuration

Standard Product Default Settings

Factory defaults are based on the interface type. Con-

figure the reader for the correct interface before scan-

ning this label.

Selecting the Interface Type

6 SD9030 Dongle

To change the defaults refer to the PowerScan™9X00 PRG,

or to the Datalogic Aladdin™Configuration program, both

downloadable from the Datalogic website.

Selecting the Interface Type

Upon completing the physical connection between the

reader and its host, scan the appropriate bar code for your

system’s correct interface type.

Configuring the Interface

Scan the programming bar code which selects the appro-

priate interface type for the system the reader will be con-

nected to.

CAUTION

Scanning this bar code will RESET all settings for the

PowerScan

™

PM9X00. Any customized settings that

may have been applied to the reader will be lost.

Unlike some other programming features and options,

interface selections require that you scan only one pro-

gramming bar code label. DO NOT scan an ENTER/EXIT

bar code prior to scanning an interface selection bar

code.

Some interfaces require the scanner to start in the dis-

abled state when powered up. If additional scanner

configuration is desired while in this state, pull the

trigger and hold for 5 seconds. The scanner will change

to a state that allows programming with bar codes.

Inhaltsverzeichnis

Andere Datalogic Empfänger Handbücher

Datalogic

Datalogic SG4 FIELDBUS Series Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung