Datalogic HandScanner MR Bedienungsanleitung

HANDSCANNER

QUICKSTART GUIDE

HANDSCANNER

HAND TRIGGER

DATALOGIC CHARGING STATION

HANDSCANNER

DATALOGIC GATEWAY

SCANNER

WEARABLES

S,M,L

Trigger located on the index

nger. Clip left or right.

CONNECTIVITY DEVICE (OPTIONAL) CHARGING STATION

Press the textile trigger. Aim at the barcode and scan.

Use your ngers to press between HandScanner and the

fastening rail of the Hand Trigger. Press the HandScanner up

slightly and push it forward without scratching over the pins.

RELEASE

CONNECT WITH PAIRING BARCODE: 3 OPTIONS

INSERT

SCAN

QUICKSTART GUIDE

ACTIVATE

Insert the HandScanner in the Hand Trigger. Press the textile trigger on the Hand Trigger for about 2

seconds to activate the HandScanner.

Open the app symbol “Insight Mobile” on the mobile

device and scan the Pairing Barcode.

VIA INSIGHT MOBILE

01 02

Scan the BLE HID Pairing Barcode.

VIA BLE HID

The pins face down. Insert the HandScanner in the

Datalogic Charging Station.

CHARGE

HOURS

Scan the Pairing Barcode on the top of the Datalogic

Gateway.

VIA DATALOGIC

GATEWAY

HANDSCANNER IS NOT WORKING

PROBLEM SOLUTION

HandScanner is not reacting /

HandScanner is not scanning

a barcode.

Battery is not charged.

Charge the HandScanner in the Datalogic Charging Station for

at least 20 min.

Hand Trigger is defective.

Change the Hand Trigger.

Battery symbol of the HandScanner

ashes red.

Battery charge is low.

Charge the HandScanner in the Datalogic Charging Station for

at least 20 min.

TROUBLESHOOTING

HANDSCANNER SCANS BADLY

PROBLEM SOLUTION

The crosshairs ( ) /

scan dot ( ) light up, but

the barcodes are hard to scan.

HandScanner glass is dirty.

Clean the HandScanner glass with a cotton swap.

Scanning distance is not optimally used.

Position the HandScanner closer or further away from the

barcode label and scan.

For standard range: 3.9 - 31.5 in (10-80 cm)

For mid range: 11.8 - 59 in (30-150 cm).

The barcode label cannot be read.

Create new barcode label.

NO TRANSMISSION OF BARCODE DATA

PROBLEM SOLUTION

Barcode data is not transferred. HandScanner is not connected to the end device.

1. Scan the Pairing Barcode on the end device /

Datalogic Gateway / in Insight Mobile App.

2. Wait until the HandScanner is connected to the end device and

lights up blue twice briey after a successful connection.

NEED HELP?

datalogic.com/support

Datalogic S.r.l.

Via San Vitalino 13

40012 Lippo

Calderara di Reno BO, Italy

www.datalogic.com

STANDARD SETTINGS:

Barcode Sux: Enter (CR)

DIRECTIVES AND CERTIFICATION:

2014/53/EU Radio Equipment Directive (RED)

2011/65/EU Restriction of Hazardous Substances (RoHS)

PROBLEM COULD NOT BE SOLVED?

Hard Reset:

1. Insert the HandScanner in the Hand Trigger.

2. Hold the trigger pressed for about 15 seconds

3. Release the trigger. Press the trigger again for

about 2 seconds to reactivate the HandScanner.

820118500 Rev. A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Datalogic Scanner Handbücher

Datalogic

Datalogic Magellan 3300HSi Installations- und Betriebshandbuch

Datalogic

Datalogic MAGELLAN 3200VSI Bedienungsanleitung

Datalogic

Datalogic DS6300 Bedienungsanleitung

Datalogic

Datalogic Magellan 1100i Bedienungsanleitung

Datalogic

Datalogic MAGELLAN 8400 Bedienungsanleitung

Datalogic

Datalogic DS2100N Bedienungsanleitung

Datalogic

Datalogic DS6300 Bedienungsanleitung

Datalogic

Datalogic Magellan 9800i Bedienungsanleitung

Datalogic

Datalogic DS2200 SH2348 Bedienungsanleitung

Datalogic

Datalogic DS8100 Bedienungsanleitung

Datalogic

Datalogic DS41-X0 Bedienungsanleitung

Datalogic

Datalogic HS7500 Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Datalogic

Datalogic Falcon 4410 Installations- und Betriebshandbuch

Datalogic

Datalogic DX8200A-3002 Bedienungsanleitung

Datalogic

Datalogic DLL5000 Series Bedienungsanleitung

Datalogic

Datalogic Magellan 9800i Installations- und Betriebshandbuch

Datalogic

Datalogic Magellan 3400VSi Bedienungsanleitung

Datalogic

Datalogic Matrix 450 Bedienungsanleitung

Datalogic

Datalogic Magellan 9800i Bedienungsanleitung

Datalogic

Datalogic Matrix 320 Bedienungsanleitung

Datalogic

Datalogic Gryphon I GPS4400 Bedienungsanleitung

Datalogic

Datalogic Magellan 1500i Installations- und Betriebshandbuch

Datalogic

Datalogic Heron D140 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung