Daum electronic Premium 8 Bedienungsanleitung

User Manual

Miscelleaneous

Table of Contents

Keywords Glossary / Info Texts

Please refer to the information concerning each operation status stored in the

dashboard. Use the Info-key to display this information.

The keywords glossary provides additional information and explanations.

The keywords glossary and the info-texts are an essential part of this user

manual!

This treadmill ergometer is specially designed for health and endurance training.

High quality manufacturing, an easy to read dashboard, and ease of use and of

maintenance contribute to make this appliance an ideal training device for sport

and fitness training. We would also stress that the complete equipment list and

the convincing performance range appeal to athletes and fitness conscious

persons of every age group.

Introduction

Designed and manufactured in conformity with the DIN EN 957 1/-6 Class

SA/HA standard, the ergo_run is suited for a therapeutic utilisation (It does not

meet the requirements for medical diagnosis usage in medical clinics).

The operating principle of the treadmill ergometer is based on a moving surface,

whose variable inclination can be definitely set. This physiological load can be

expressed in finite values.

The ergo_run adjusts itself to the users personal requirements.

The training intensity is controlled by adjusting the speed or the inclination, or

both parameters combined, under constant control of the heart rate frequency.

The ergo_run premium8 is thus more than just a Home Trainer, since it can

be used for sportive and therapeutic objectives.

Miscellaneous

- Introduction ................................................................................................... 2

- Keywords Glossary / Info Texts .................................................................... 2

- Data Interface ............................................................................................... 2

Safety Notes

- Using the Device in Compliance with the Recommendations ...................... 3

- The user ........................................................................................................ 3

- Emergency step off ....................................................................................... 3

- User Safety ................................................................................................... 4

- Notes From the Manufacturer to the User .................................................... 4

- Accessories ................................................................................................... 4

- Software ........................................................................................................ 4

- Documentation .............................................................................................. 4

- Other Notes .................................................................................................. 4

- Unauthorised use ......................................................................................... 4

- Connecting the device .................................................................................. 4

- Information About Personal Safety ............................................................... 5

- Training Conditions ....................................................................................... 5

Setting Up

- Control Elements and Connections .............................................................. 6

- Switching On / Off ......................................................................................... 7

- EMERGENCY STOP switch ......................................................................... 7

- EMERGENCY STOP safety rope ................................................................. 7

- Notes about Pulse Rate Measure ................................................................. 8

The Dashboard

- Top panel - Overview of the control elements .............................................. 9

- Underside - Overview of the connectors ...................................................... 9

Dashboard User Guide

- Switching On ............................................................................................... 10

- Starting Training Without Selecting a Program ........................................... 10

- Setting Personal Data ................................................................................. 10

- Starting Training by Selecting a Program .................................................... 11

- Training Programs ....................................................................................... 11

- Setting Limit Values ............................................................................. 12 - 13

- Reviewing Stored Training Data ................................................................. 13

- Fitness Test and Fitness Mark .................................................................... 14

- Relax Function ..................................................................................... 14 - 15

- Premium programs .............................................................................. 15 - 16

- System Software Update Using the Card ................................................... 17

- Keywords Glossary ..................................................................................... 17

- MP3 Player ................................................................................................. 18

General Notes

- Important Notes .......................................................................................... 19

- Training Hints .............................................................................................. 19

- Environmental Conditions ........................................................................... 19

- Used Symbols ............................................................................................. 19

- Compliance to Standards ............................................................................. 19

Maintenance

- Troubleshooting ............................................................................................ 20

EC Declaration of Conformity......................................................................... 21

Specifications .................................................................................................. 22

Assembly and Installation Guide

- Assembly Notes ........................................................................................... 22

- Package content .......................................................................................... 23

- Tools and Small Parts .................................................................................. 23

- Transport and packaging ............................................................................. 24

- Installing the device ..................................................................................... 24

- Installation steps 1 - 5 ........................................................................... 24 - 26

Service

- Liability ......................................................................................................... 27

- Maintenance and technical safety controls ................................................. 27

- Simple Maintenance and Service Activities ................................................. 27

- Adjusting the running belt ............................................................................ 28

- Applying Silicone Oil Lubricant .................................................................... 28

- Replacement of the Dashboard Battery ...................................................... 28

Tables and Diagrams

- Table of Target Heart Rate / Aerobic Zone .................................................. 29

- Overview Diagram of the Target Heart Rate ............................................... 29

Accessories

- ergo_memo-card2 ....................................................................................... 30

- EMERGENCY STOP safety rope ................................................................ 30

- Ear Clip ........................................................................................................ 30

- Cardio Sensor Chest Strap ......................................................................... 30

- Relax Sensor ............................................................................................... 30

Warranty Conditions ....................................................................................... 31

GNU General Public License ..................................................... 32 - 34

Data-Interface

You can use a personal computer (PC) to control the ergo_run premium8.

A special data cable is needed to this effect, which you can order from daum

electronics gmbh

Safety Notes

Using the Device in Compliance with the Recommendations

The ergometers of the ergo_run premium8 series may be used exclusively for

ergomettry, cardiovascular rehabilitation and for kinesitherapy.

Their use is only allowed in compliance with the instructions of the user manual.

The manufacturer will not be held liable if the ergometer is not used in compliance

with the provided instructions and consequently causes injury to persons or

other severe consequences, as well as material damages.

The CE label covers only the accessories included in the package.

Every user of this device, who is concerned with assembling, maintaining, testing

or troubleshooting it, must read and understand the contents of this user manual

before starting to work on the device.

The quality assurance system used at daum electronic gmbh complies with the

DIN EN ISO 13485:2003 standard.

daum electronic gmbh considers itself to be liable for the safety, reliability and

functionality of the device only if:

- the device is used in compliance with the instructions of the user manual.

The user

Please read the user manual carefully before starting to use the training device.

The user manual should be kept in the direct vicinity of the ergo_run premium8.

It is an integral component of the device.

Start the training by walking slowly for a few minutes to warm-up. Then increase

the running speed. Take your physical and fitness condition into consideration!

You should only run with sport or running shoes and sport garments. Running

with smart shoes or bare foot is not permitted.

Do not jump on to or from the belt while it is running. Do not jump to the front.

Do not stand still on the belt while it is running. To dot turn around on the belt

while it is running. Do not run to the side or rearwards on the belt while it is

running. The speed and inclination must always be set to a value appropriate

to the physical condition of the user. If the belt is stopped (e.g. by pressing the

Stop button or through the Emergency Stop feature, because of a power failure,

etc) and if at this moment the inclination is set to positive value, the weight of

the user combined with the gravity will cause an acceleration of the belt.

During a training the Emergency Stop implements must always be within reach

of the user.

The Emergency Stop implements are only to be used in case of hazard or falling

down risks.

Do never step on the rear return cylinder (running belt extremity); this could set

the belt in motion. Falling risk!

The lateral and rear areas of the running belt and the lifting

mechanism have dangerous nipping points and slots. Users

with long hair, loose garments, jewellery, etc. may not come

close to these nipping points and slots. Including not in the

case of a fall. Never put any clothes, towels, jewellery or similar

items down on the running belt.

Children and animals may not use the treadmill. Care must be taken to keep

children and animals at least 5 m away from the treadmill.

Using the treadmill when under the influence of alcohol, drug and/or narcotics

is not allowed.

Interrupt the training if you feel dizzy or ill, or in the event of pain of any type

and immediately consult a physician.

Inadequate or excessive training and loading through tests

can be dangerous to your health.

Users with a cardiac pacemaker or any other limitation may only use the treadmill

with an express prescription or authorisation of a physician.

A safety clearance of at least 2 m in length and 1 m width must be kept free

directly behind the treadmill, this area should be padded (e.g. a soft mat).

Inadequate and/or unauthorised use of the treadmill is not allowed and we warn

you expressly against it.

All connection cables (power supply cable, data interface cable, etc) must be

securely installed and routed. You must make sure that no one could stumble

or fall down on them.

All the safety and usage instructions in this user manual must be most carefully

respected. In particular all the instruction about maintenance and technical safety

checks.

In the case of a detected, or even only suspected, fault or defect, the treadmill

must be put out of service for safety reasons, and clear visible sign must be

posted to that effect. This is to prevent it from being used inadvertently. You

should then contact the technical customer service department of daum electronic

gmbh.

Failure to comply with the safety prescriptions can cause

injuries or death.

Oil and other maintenance products, as well as parts of the device and of the

accessories, are not suitable for consumption. Therefore you should keep them

away from the reach of children and animals.

Warning! The manufacturer is not liable for personal physical injuries or material

damages.

Stepping off the belt in emergency situations

In an emergency situation or when you feel you will fall down you must immediately

press the Emergency Stop button. You must hold the lateral handrails and/or

the front handle with both hands. You must immediately lay your feet on the

treadways (stepping areas) on the sides of the belt.

Training and measurement results (e.g. the heart pulse rate) are influenced by

holding the handrails and handles. We recommend that healthy users under

normal training conditions only hold the handrails and handles in emergency

situations or for safety purposes.

Important notes, warnings and risk notices are identified with

the symbol to the side. This symbol is there to draw your

attention to important matters that must absolutely be taken

into consideration when performing measurements or

connecting to other devices.

Disconnect the network connector of devices used on a network before cleaning

or disinfecting them.

The safety, reliability and functionality of the device can only be maintained if:

- the installation room complies with the valid installation requirements according

to DIN and VDE and the device is connected to a power supply socket with a

safety (protective) ground wire.

- the installation room complies with the environmental requirements of the

device, and the device is used in conformity with the instructions of the user

manual.

Ask the technical service department of daum electronic gmbh for advice in the

case any liquid penetrates the device.

Safety Notes

User Safety

When coupling many devices to a test site care must be taken to avoid any

danger arising from the summation of the leakage currents and to ensure the

potential equalisation is effected through a common current (power) supply (e.g.

a wall socket-outlet). If you have any questions please ask your dealer or the

service department of daum electronic gmbh.

If a socket with multiple outlets is installed after the initial start-up, no other

device may be connected to this socket. (use covers on the multiple sockets)

An electrical shock hazard exists when touching devices that are not separately

grounded.

Defective or faulty devices and accessories may not be used.

The personal computer and all other connected devices (e.g. monitor, printer,

etc) must be installed at least 1.5m away from the training place, because

leakage currents could be generated on the housing (or use separate grounding,

housing leakage current).

Notes From the Manufacturer to the User

The device is not protected against the infiltration of liquids.

Direct contact with humidity or liquids must absolutely be avoided.

Care must be taken to wipe out sweat drops after training (sweat attacks paint

and plastic parts)

Damages caused by sweat are not covered by the warranty

Accessories

The device may only be used with the accessories prescribed and distributed

by daum electronic gmbh.

Every accessory item and every device connected must be manufactured in

conformity with the corresponding standard, e.g. DIN EN 60950 for computer

devices, DIN EN 60601-1 for electromedical devices.

Software

The supplied software may only be copied and archived for safety and functional

reasons. In special cases a request must be addressed in writing to daum

electronic gmbh. Releasing it to non-authorised persons is not allowed. The

ergo-bike run8 may only be used with the internal and external softwares supplied

and authorised by daum electronic gmbh.

Documentation

The documentation supplied is an integral part of the ergo_run premium8 and

may only be copied or distributed with the authorisation of daum electronic

gmbh.

Other Notes

The device is not suited for operation in rooms and / or areas with explosion

risks.

Cellular telephones may not be used in the direct vicinity of the device, otherwise

they may interfere with its functionality.

Wireless telephones may be used.

Electromagnetic interference are primarily characterised by the oscillation of the

displayed load value. If the displayed value varies uncontrollably frequently,

even when the speed is higher than 30 /min, this can be an effect of electromagnetic

compatibility (EMC).

Only cables certified by daum electronic gmbh may be used to connect the

device with other devices.

Forbidden Use

Automatic operations (remote controlled from a computer) is forbidden, when

the health and the physical condition of the user do not allow this usage. Non

compliance to this can lead to injuries and serious health risks or even to death.

Any utilisation with wheels (bicycle, wheelchair, inline skates or wheelskis), as

well as spiked running shoes or other spiked shoes on the standard running

surfaces or belts is forbidden.

If you believe that not authorised persons may have access

to the device, or know of any other reason to lock the treadmill,

then you must lock the treadmill.

Supplying power to the device:

The ergo_run premium8 must be connected to a 230Volt 50 Hz AC socket outlet.

This outlet must be protected by a 16 amperes fuse (C type).

Before connecting the device to the power outlet socket,

proceed with a careful visual examination of the power cord

and its plug to make sure they a free of damage. A damaged

cord and/or plug must immediately be replaced by an authorised

person.

Before connecting the ergo_run premium8 to the power supply compare the

specifications concerning voltage and frequency indicated on the nameplate

with your local power supply specifications. You may not connect the device

before doing this comparison<.

The connection to the power supply socket must be done directly to the wall

socket. The usage of extension cords and/or multiplier socket is not allowed.

Power surges or power failure may cause the device to

malfunction and/or become defective, as well as to a complete

shutdown of the ergo_run premium8. In order to restart the

device in this case you must switch the device OFF by means

of the mains switch and wait for the ON/OFF interval (about

1 - 2 minutes). Then you can restart the device.

Information About Personal Safety

The ergo_run ergometer is intended for adults. Children should

only be allowed to train with the ergometer under adult

supervision.

Persons suffering from any of the following diseases should consult their family

physician or a specialist before starting training with the ergo_run.

- Heart disorders like angina pectoris, coronary thrombosis (infarct),

stenosis,and high blood pressure

- Diabetes

- Respiratory disorders like asthma, chronic bronchitis, etc.

- Rheumatism

- Gout

- Or any other disease or illness

You should never train when you feel ill or weak.

Please take the time to become acquainted with all the functions and setting

possibilities of the device before the first training on the treadmill.

Never grab the moving endless belt with the hands. Never leave any object in

the vicinity of the cylinders of the running belt, where it could be pulled in.

Safety Notes

The treadmill is equipped with an EMERGENCY STOP

mechanism. Before starting the training the user must attach

the clothes peg of the safety rope to his clothing. Whenever

the safety rope is pulled out the running belt will automatically

stop. The belt will not restart upon reinstalling the safety rope.

The length of the safety rope can be adjusted to fit the user.

Before starting the training please also put on the ear clip or the Cardio sensor

strap, in addition to the safety rope, before starting the program.

Do not hop or jump during the running training.

You can prevent others unauthorised persons from using the treadmill by pulling

the safety rope out.

You should never use the ergo_run to find out your maximum degree of

physical endurance. This can have serious consequences on your health!

Should you change the installation location of the treadmill, you must verify the

operation of the running belt in its new location. It should always stay in the

centre of both shafts.

daum electronic gmbh is not liable for personal physical injury or material

damage.

Training Conditions

You should pay attention to providing good training conditions; this includes

choosing the training room and installation place. Makeshift installation places

do not incite to training!

Summary of the Important Safety Hints:

- Read the user manual and the safety hints

- Install on a horizontal and solid floor without unevenness

- Safety clearance of 1 m on each side and 2 m to the rear

- Only persons in good physical and health conditions may use the

device

- Train only with sport clothing and running shoes

- Before starting a training session attach the EMERGENCY STOP safety

rope to the clothing and adjust it to the correct length

- Put on the ear clip or the Cardio sensor strap before starting a training

session

- Begin training at walking speed and only then start running

- Do not jump on to or from the belt

- Do not stand still, turn around or jump while the belt is running

- Be careful with the dangerous nipping point of the running belt

- Use the EMERGENCY STOP when falling

- Interrupt the training if you feel dizzy or ill

- Children may use the treadmill only under adult supervision

- Always pull out the mains plug to repair or clean the device

- When you change the installation location check that the running belt

runs in the centre of both shafts

Setting Up

1Dashboard

2Interfaces and connectors

3Handrails front

4Handrails lateral

5Name plate

6Power switch

7Piston type fuse

8Roller casters

9Emergency Stop Mechanism

10 Lateral treadways with non slipping surface

11 Running area (belt)

12 Rear cylinder cover

13 Level compensation

Control Elements and Connections

150

daum electronic GmbH

D-90768 Fürth

ergo-run premium8

230V

50/60Hz 2500W

123456789101112

200

Made in Germany

1011

Setting Up

Fig. 1

Fig. 2

ergo_memo-card2

protection

slider

EMERGENCY STOP Safety Rope

The ergo_run premium8 is equipped with an Emergency Stop Safety Rope. This

rope guarantees that when the user/patient is about to fall or when the user/patient

runs too slowly the running belt will stop automatically.

The patient/user must therefore attach himself or herself to the safety rope

before starting a training session (Fig. 1). The length of the safety rope must be

adjusted in such a way that the Emergency Stop Function is surely executed

when

- the user is about to fall.

- before the user reaches the rear third section of the running belt.

When the Emergency Stop Safety Rope is pulled out, the running belt will resume

its operation when the Start key is pressed (dashboard console) after the safety

rope is reinstalled on the dashboard (Fig. 2).

Switching ON / Off

Please read the safety notes before switching the ergo_run premium8 on.

Insert the ergo_memo-card2 in the dashboard before switching the device on.

Use the green On/Off switch " I " on the front motor cover of the device to switch

it on and off. The switch is illuminated in the ON position.

EMERGENCY STOP switch

The Emergency Stop switch must be unlocked before you can use the ergo_run

premium8. To unlock it turn the red button to the left/right slightly.

On-/Off switch

Only then can you use a computer to save e.g. mp3 files (in the \mp3 folder)

or update files (in the \update folder) on the card.

For safety reasons you must pull (route) the power cord to

the front of the device, otherwise it may be cut (ruptured) by

the elevation control mechanism.

When switched on, the system takes about 1 minute to load the software. The

colour screen displays during this time a software load progress bar.

Wait for the beep signal before using the dashboard.

The interval period between turning OFF and ON the device

must always exceed 1 to 2 minutes. Otherwise the motor

controls may be damaged and/or the fuses may breakdown.

If the memory card is inserted after the device is switched on, then you must

wait for the beep signal. This can take about 5 seconds. (if the card is empty it

will be initialised)

In principle the memory card should be pulled out while you are not training or

only after the beep signal!

The protection slider on the ergo_memo-card2 must point to the bottom when

the card is inserted into the dashboard. This will make it possible to write to the

card.

If the slider points upward the card is locked/write protected.

On / Off power

switch

Setting Up

Ear clip

Cardio Sensor-chest

strap correctly put

Cardio Sensor-Strap

Notes about Pulse Rate Measure

Ear Pulse Rate Measure

Every heart pulse modulates the light passing through the lobe, and can thus

be detected by an infrared sensor in the ear clip, and displayed as heart pulse

rate. The measure of the pulse rate over the ear is much more precise than the

measure over the hand sensor.

Please make sure that the ear clip is correctly put on:

1. Insert the connector into the Cardio socket.

2. You should rub the ear lobe to stimulate blood circulation.

3. Attach the ear clip to the ear lobe (the closest possible to the head). The

contact surfaces must sit entirely on the skin.

The scattering in the display of the pulse rate variability is larger than with the

wireless pulse measure (factor 2).

Note: Strong light sources, like sunlight, halogen projectors, and neon

lamps, and also ear piercing or ear rings, or the intake of beta-blocker

could affect the measurements.

Wirless Pulse Measure

The Cardio sensor chest strap transmits the pulse rate directly to the integrated

wireless Cardio pulse receiver in the device. This pulse measurement method

is the most precise.

Note: Your pulse rate will be correctly evaluated over the whole measuring

range only if you use a non-coded wireless pulse rate transmitter.

To ensure the maximum efficiency of the Cardio sensor strap, you should lightly

humidify the contact surfaces (inner side) of the chest strap before starting the

training.

Note: Using two chest straps simultaneously in the same room,

either of the coded or non-coded type, at about 1.5 meter from

the receiver, can lead to the display of a wrong pulse rate.

Note:

When you train without ergo_memo-card2 you will not have the possibility to

store training results.

When you train without pulse rate measure, the pulse rate will not be displayed!

The user controls the dashboard by means of the control button, the Menu

key, the Info key and the two function keys.

Use the Info key to obtain more information about the individual menu

items.

If the requested information spans many pages, you can leaf through the pages

by turning the control button. Press the Info key to display the keywords glossary

(page 17).

The Dashboard-Console

Section Front side of the console

Towel-

holder

Bottle-

holder

20 27

12. -/+ Inclination

Reduce or increase the inclination

13. Start/Stop

Starts the belt at the speed of 0.5 km/h / Stops the belt smoothly

14. EMERGENCY STOP switch

15. Speed keys

Choice of pre-programmed speeds (km/h)

16. -/+ Speed

Reduce or increase the speed in 0.1 km/h steps

17. Relax connector

Used to connect the Relax sensor

18. -/+ Set Values

Reduce or increase the pulse rate, speed and Watt

The value that can be actually modified will be colour-highlighted in the

training view.

19. Memory Card reader (SD-Card)

Battery replacement

The button cell battery (CR 2032) is located on the underside of the circuit board

of the dashboard. Replace this battery when you notice a loss of time and date

on the system clock. (See the maintenance section)

Top panel

1. Colour screen

2. Volume (up)

3. MP3-Player

4. Volume (down)

5. Function keys

6. Menu

Calls the main menu

7. Info

Display an explanation about every menu option

8. Audio connector

Use to connect a headset

9 Control button

By turning and pressing this button you can select and open menu items

10. EMERGENCY STOP safety rope

Stops the belt when pulled out

11. Cardio connector

Used to connect the ear clip

Underside

20. RS422 interface to the control board

21. Reset key

22. USB-Host

23. USB-Slave

24. Audio connector L/R to external amplifier (Line Out)

25. Network connector (Ethernet)

26. Light-emitting diode (LED) for network connector

27. Battery 3.3 V (hidden by the console)

Dashboard User Guide

Start

running

Press the

function key

under End

Press the

Menu key

Turn and

press control

button to

select

Setting

Turn and

press control

button to

select Name

& Addr.

Turn and

press control

button to

select

Personal data

Turn and

press control

button to

select Name

Slider switch

lower position:

write protection

is deactivated.

Please use the ergo_memo-card2 with every training session to store your

personal settings and actual training data. This card is user related. It is not

possible to store the personal settings of a second user on the same card.

Note:

When you train without ergo_memo-card2 you will not have the possibility to

store training results.

When you train without pulse rate measure, the pulse rate will not be displayed!

The user controls the dashboard by means of the control button, the Menu

key, the Info key and two function keys.

Use the info key to obtain more information about the individual menu

items.

If the requested information spans many pages, you can leaf through the pages

by turning the control button. Press the Info key to display the keywords glossary

(page 17).

Note:

We reserve the right to modify the figures!

Insert the ergo_memo-card2 in the card reader before turning the device on.

Setting Personal Data

Before training you should enter your personal data and limit values under menu

item Setting.

User and device data can be set here.

Starting Training Without Selecting a Program

You can start training immediately with this screen displayed.

You can enter all the characters and special characters by turning and pressing

the control button. Use the position Small to switch between capital and small

characters as well as special characters. Use the <- position to delete and

correct your entry

Andere Handbücher für Premium 8

Inhaltsverzeichnis

Andere Daum electronic Tretmühle Handbücher

Daum electronic

Daum electronic ergo_run classic Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack NTL12941 Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung