Deda Elementi SL30DB Bedienungsanleitung

SL30DB

CARBONIO COPERTONCINO DISC BRAKE

CARBON CLINCHER DISC BRAKE

MANUALE D’USO

E MANUTENZIONE

USER’S MANUAL

Ver. 0 – Ottobre / October 2017 ©Deda Elementi

Congratulazioni per le vostre nuove ruote Deda Elementi. Leggere e seguire

attentamente le seguenti istruzioni per un corretto utilizzo. Un errato montaggio

e un incorretta applicazione delle seguenti istruzioni può danneggiare il prodotto

che non sarà più coperto dalla garanzia, danneggiare la bicicletta o causare un

incidente. Per una appropriata installazione del prodotto sono richiesti specifici

attrezzi e una adeguata esperienza, si raccomanda dunque che il prodotto sia

installato dai punti vendita ufficiali Deda Elementi o da personale qualificato nel

montaggio di biciclette.

Congratulations on your new Deda Elementi wheels. Please read these instructions

carefully and follow them for correct use. An improper installation or wrong

application of the instructions could damage the product, that will be no more

covered under warranty, damage the bicycle or cause an accident resulting in injury

or death. Since specific tools and experience are necessary for proper installation,

it is recommended that the product be installed by an official Deda Elementi dealer

or a qualified bicycle technician.

INDICE

INFORMAZIONI GENERALI DI SICUREZZA _____________________________________ pag. 4

GARANZIA ________________________________________________________________ pag. 5

PACKAGING ______________________________________________________________ pag. 6

SPECIFICHE TECNICHE _____________________________________________________ pag. 7

PNEUMATICI

_______________________________________________________________ pag. 8

CASSETTA PIGNONI________________________________________________________ pag. 9

ROTORE FRENO A DISCO___________________________________________________ pag. 10

MONTAGGIO RUOTE SUL TELAIO ____________________________________________ pag. 11

PULIZIA, MANUTENZIONE E SOSTITUZIONE DI PARTI___________________________ pag. 13

ITA

GENERAL SAFETY INFORMATION ____________________________________________ pag. 14

WARRANTY _______________________________________________________________ pag. 15

PACKAGING ______________________________________________________________ pag. 16

TECHNICAL SPECIFICATIONS ________________________________________________ pag. 17

TIRES

_____________________________________________________________________ pag. 18

SPROCKETS INSTALLATION _________________________________________________ pag. 19

DISC BRAKE ROTOR _______________________________________________________ pag. 20

FITTING THE WHEELS ON THE FRAME ________________________________________ pag. 21

CLEANING, MAINTENANCE AND REPLACEMENT PARTS ________________________ pag. 23

ENg

CONTENTS

eng

GENERAL SAFETY INFORMATION

It is the user’s responsibility to examine the product on a regular basis to

determine the need for service or replacement. Wheels and their components are

products that wear from normal use of the bicycle, for that reason we recommend

cyclists to regularly inspect their bicycle and parts in order to detect any damage.

If any doubts or problems occurr, discontinue riding the wheels and have them

inspected by an oﬃcial Deda Elementi dealer or a qualiﬁed bicycle technician.

These wheels have been designed and intended to be used on normal paved

surfaces. In case of use on not paved surfaces or oﬀ-road, wheels can be

subjected to damages, loose their functioning and cause serious accidents

and injury for the user.

Regularly check the wheels to be certain they are installed correctly to the

bicycle and fastened securely to the frame and fork.

If any bicycle fall or accident occur, discontinue riding the wheels and have

them inspected carefully by an oﬃcial Deda Elementi dealer or a qualiﬁed

bicycle technician.

Frequently check the status of the wheels parts subjected to wear and if

necessary make the maintenance and/or parts replacement through the

oﬃcial Deda Elementi dealers.

It is recommended to make an inspection after each riding season or every

time in case of bearing problems, wheel out of center or damaged parts are

apparent

Install only bicycle tires compatible with rims technical speciﬁcations included

in this user’s manual. The installation of tires not compatible can damage

the rim wheels, invalidate the Deda Elementi Warranty and cause serious

accidents and injury for the user.

Follow the minum inﬂation pressure recommended by the tire manufacturer.

Never exceed the maximum inﬂation pressure permitted for this Deda

Elementi carbon rim of 7 bar / 100 psi. The use of inﬂation pressures out of

this range can damage the carbon rim, invalidate the Deda Elementi Warranty

and cause serious accidents and injury for the user.

Read the whole User’s Manual carefully and keep it in a safe place for later

reference.

WARRANTY

Deda Elementi warrants that all Deda Elementi products are free from defects in

materials or workmanship for a period of two years after original purchase unless

otherwise stated on the Warranty policy.

The Warranty is valid for the purchase of an origianl Deda Elementi product only.

2.1 LIMITS OF WARRANTY

In case of sale or product cession, the Warranty will be considered valid for a two

yeras period only from the original purchace.

The Warranty doesn’t cover damages caused by modifications, even small; any

kind of adaptions or aletration; maintenance performed by an unauthorized

people; use of the product outside the normal riding conditions on paved

road surfaces. The Warranty doesn’t cover even damages caused by impacts,

collisions, falls that may occurr for accidental reasons.

The Warranty doesn’t cover aesthetic defetcs like: matting, chap, fading or other

phenomenons that may occur to the wheels during the use and after the bicycle

cleaning using water in pressure, solvents or similar products, petrol.

In case of imperfections, defetcs or damages found on the product, the user is

asked to entry in contact with the dealer within 10 (ten) days; after this periond

ends the Warranty will be no more considered eligible.

Deda Elementi reserves the right to modify partially or completly the products,

instructions and warranty without any notice to the customer.

eng

TECHNICAL SPECIFICATIONS:

* Campagnolo freehub body version

** Tubeless conversion kit not included into the wheels package

*** Disc brake rotors not included into the wheels package

The Wheels package you have just purchased contains the following items:

The wheels

Wheels bag

User’s Manual

Rim Tapes

PACKAGING

Wheels Model SL30DB

Cassetta Compatibility

10v Shimano / Sram

(with 1.80mm spacer)

11v Shimano

*10-11v Campagnolo

Rim

Size 622x19C

Width 25.0mm

Height 30.0mm

Rim Tape 622x18mm

Tire Compatibility Clincher or Tubeless (**)

Recommended Tires Sizes min 700x25 – max 700x40

Hubs Front 100mm

Rear 142mm

Spokes

Front 293mm; ﬂat; straight pull

Rear Non Drive side 293mm; ﬂat; straight pull

Rear Drive side 292mm; ﬂat; straight pull

Nipples 15mm ABS, aluminium

Disc brake rotor compatibility Shimano® center lock (***)

Frame compatibility

thru-axle Front 12x100mm, Rear

12x142mm (standard)

traditional system QR Front 100 mm, Rear 135 mm

(kit available as spare part)

thru-axle 15 mm front Front TA 15 mm (kit available

as spare part)

Deda SL30DB wheels are designed to use clincher tires with inner tubes or Tubeless

tire. The Tubeless conversion kit is not included into the wheels box. Check tires and

inner tubes dimensions according to the rim technical specifications included in this

user’s manual.

WARNING: Do not use tubular or tubeless tires with this wheel. The use of non

compatible tires with this wheel can cause sudden and unexpected loss of pressure,

loss of control and tire failure resulting in serious accident and injury for the user.

Before the tire installation check that rim tape is already installed in the right

position inside the rim; if not please install first the rim tape.

Make sure the rim tape cover all the rim bed holes along the entire circumference

of the wheel.

The valve hole on the rim tape has to be placed at the same position of the valve

hole of the rim wheel (Fig. 1).

Install the tire on the wheel and proceede with tire inflation as per tire manufacturer

recommandations. Never exceed the maximum inflation pressure permitted for

this Deda Elementi carbon rim of 7 bar / 110 psi.

TIRES

Fig 1

Valve hole

Rim tape

eng

WARNING: for Tubeless tire installation carefully read the instructions of the tire and

tubeless conversion kit Manucaturer.

WARNING: Never exceed the maximum inflation pressure recommended by the

wheels manufacturer as indicated in this user’s manual. Excessive tire pressures

could damage the rim structure resulting in serious accident and injury for the user.

WARNING: Tire installation requires a specific experience of the product, in case

of doubts please contact an official Deda Elementi dealer or a qualified bicycle

technician. During tire installation don’t use tools or tire lever that can fold, damage or

fragilize the rim edge. An incorrect tire installation can cause serious accidents and

injury for the user.

Deda Elementi wheels are available with Shimano® / Sram® 10-11 speed cassette

and Campagnolo® 10-11 speed cassette. Read and carefully follow the installation

instructions of the sprockets.

The rear wheel with Shimano® freehub body is supplied with a 1.80mm aluminum

spacer that is intended to be used with Shimano® /Sram® 10 speed cassette only .

Please don’t use 1.80mm spacer with 11 speed cassette.

SPROCKETS INSTALLATION

Wheel Type Freehub Cassette Compatibility

Shimano/Sram Shimano 11v Shimano 10v +

1.80mm spacer

Sram 11v

Campagnolo Campagnolo 11v Campagnolo 10v Sram 10v + dist.

1.80mm

WARNING: Since specific tools and experience are necessary for proper

sprockets installation, in case of doubts it is recommended that the product be

installed by an official Deda Elementi dealer or a qualified bicycle technician. An

incorrect sprockets installation can cause serious accidents and injury for the

user.

WARNING: Please make sure that wheel freehub body be compatible with

your sprockets cassette before proceed with the assembly. Failure to insure

compatibility between wheel and sprockets cassette can cause malfunction of

the bicycle drive train resulting in serious accident and injury for the user.

Deda SL30DB Disc Brake wheels are compatible with Shimano® Center Lock

locking systems.

The disc brake rotors are not included into the wheels box.

For Rotors installation with Shimano® Center Lock locking systems read and

carefully follow the instructions of the disc brake manucaturer.

WARNING: Disc brake rotor installation requires a specific experience of the

product.

In case of doubts please contact an official Deda Elementi dealer or a qualified

bicycle technician.

An incorrect rotor installation can cause serious accidents and injury for the user.

DISC BRAKE ROTOR

eng

FITTING THE WHEELS ON THE FRAME

WARNING: Since specific experience is necessary for proper wheels installation, in

case of doubts it is recommended that the product be installed by an official Deda

Elementi dealer or a qualified bicycle technician. An incorrect wheels installation

can cause serious accidents and injury for the user.

Deda SL30DB wheels are pre-assembled from the factory with Thru-axle locking

system (Front 12x100, Rear 12x142). The Thru-axles are not included into the

wheels package.

For thru-axle installation and wheels locking to the frame and fork read and carefully

follow the installation instructions provided by the bicycle and fork manufacturer.

WARNING: An incorrect installation of the through axle can result in the wheel

separation from the fork and cause serious accidents and injury for the user.

Conversion kit for Quick Release (100 mm Front/ 135 mm Rear) and Thru-axle (TA

15 mm Front) are available as spare parts.

Inhaltsverzeichnis

Andere Deda Elementi Fahrradzubehör Handbücher

Deda Elementi

Deda Elementi ALANERA 2020 Bedienungsanleitung

Deda Elementi

Deda Elementi WD30ALCL Bedienungsanleitung

Deda Elementi

Deda Elementi Jet Clip-On Bedienungsanleitung

Deda Elementi

Deda Elementi RS4DB Bedienungsanleitung

Deda Elementi

Deda Elementi Gera Alloy Bedienungsanleitung

Deda Elementi

Deda Elementi SL4DB Bedienungsanleitung

Deda Elementi

Deda Elementi Superbox DCR Bedienungsanleitung

Deda Elementi

Deda Elementi Alanera ALADCRPOB090X40 Bedienungsanleitung

Deda Elementi

Deda Elementi ZERO2DB Bedienungsanleitung

Deda Elementi

Deda Elementi SUPERBOX Bedienungsanleitung

Deda Elementi

Deda Elementi SL38C Bedienungsanleitung

Deda Elementi

Deda Elementi Gera Carbon Bedienungsanleitung

Deda Elementi

Deda Elementi Vinci Bedienungsanleitung

Deda Elementi

Deda Elementi ZERO2DB Bedienungsanleitung

Beliebte Fahrradzubehör Handbücher anderer Marken

Sigma

Sigma BC 16.16 Bedienungsanleitung

Playcore

Playcore Dero Setbacks Bedienungsanleitung

VDO Cyclecomputing

VDO Cyclecomputing x3dw Bedienungsanleitung

Cateye

Cateye RAPID X2 Bedienungsanleitung

buratti meccanica

buratti meccanica Clorofilla Trail Bedienungsanleitung

Shimano

Shimano SG-8R20 Betriebsanleitung

BOB

BOB YAK Bedienungsanleitung

APLIC

APLIC 303303/20190717TW012 Bedienungsanleitung

SRAM

SRAM AXS BlipBox Bedienungsanleitung

Garmin

Garmin EDGE 500 Bedienungsanleitung

Shimano

Shimano FD-RX810 Bedienungsanleitung

Cateye

Cateye V2C - Gebrauchsanweisung

KMART

KMART 43115907 Bedienungsanleitung

SIGMA SPORT

SIGMA SPORT Buster 2000 Bedienungsanleitung

NVO Components

NVO Components STEM Bedienungsanleitung

DAXYS

DAXYS BP188 Bedienungsanleitung

XLC

XLC BV-W17 Bedienungsanleitung

Key-Disp

Key-Disp KD31M Bedienungsanleitung