DEFA SmartCharge 701515 Bedienungsanleitung

SmartCharge

Technical Manual

DEFA AS - Support

Blingsmov. 30,

3540 Nesbyen

Norway

(: +47 32 06 77 00

7: +47 32 06 77 01

:: defa_pow[email protected]

KGK Norge AS

Caspar Storms vei 19

N-0664 OSLO

(: 22 88 46 80

7: 22 72 09 02

:: [email protected]

KG Knutsson AB

Hammarbacken 8

S-191 81 SOLLENTUNA

(: 08-92 34 00

:: [email protected]

Avant Denmark

Tulipanvej 5

DK-6670 HOLSTED

(: +45 72 31 20 11

7: +45 76 78 13 48

:: info@avantdenmark.dk

OY KAHA Ab

Ansatie 2

01740 VANTAA

(: (09) 615 68 00

Dometic WAECO

International GmbH

Hollefeldstraße 63 · D-48282 Emsdetten

(: +49 2572 879-0

7: +49-2572 879-300

KG Knutsson AS

Saeveski 12

11214 Tallinn

(: 372) 6519 300

7: 372) 6519 303

:: [email protected]

UAB ”KG Knutsson”

Jočionių g. 14; Vilnius

LT-02300

(: 8 5 275 81 81

7: 8 5 275 02 28

:: [email protected]

KG Knutsson, SIA

K. Ulmana gatve 2, Riga

LV-1004, Latvija

(: +371 67 807 870

7: +371 67 807 874

:: [email protected]

Inter Cars S.A.

ul.Gdańska 15

Cząstków Mazowiecki

05-152 Czosnów

(: +48 22 714 1323

7: +48 22 714 1325

:: ogrzewanie@intercars.com.pl

Dometic Benelux BV

Ecustraat 3

4879 NP

Etten-Leur

(: 0031 76 50 29 000

7: 0031 76 50 29 090

Varanger (LLC)

2A Odoevskogo str. ofce

117574 Moscow

Russian Federation

(: +74954230600

7: +74954230600

English 8

Norsk 14

Svenska 20

Dansk 26

Suomi 32

Русский

Eesti 46

Polski 52

Deutsch 58

Latviešu 64

Lietuviškai 70

8 English

Charging phase details

Pre Analysis

The charger checks if the battery is correctly

connected. The battery’s charge level (V) and

total capacity (Ah) is measured to determine the

correct settings for charging.

Charging

The charger starts charging the battery with

constant current up to 14.4V (at 20°C). The

charge voltage is then held constant at 14.4V and

the charging current is reduced until it is below

a dened level.The charge voltage then drops to

13.8V, before the long-term charging phase starts.

During charging, battery charge is shown by the

number of LEDs illuminated. The blinking segment

above these LEDs indicates active charging. Once

full battery charge is reached, all 5 LED segments

remain illuminated.

If the measured battery voltage is below 4.5V,

the charger will enter Error Mode.

Battery

voltage

>12.65V

12.55V–12.65V

12.45V–12.55V

12.35V–12.45V

4.5V–12.35V

Battery

status

95–100%

80%

60%

40%

0-20%

LED

indication

All segments on

4 segments on

3 segments on

2 segments on

1 segment on

9English

Post Analysis

The charger analyses the battery again after the

charging phase. If the charger detects an error in

the battery, the warning triangle will ash. Post

analysis can detect batteries with a short circuit in

individual cells. This cannot be detected in the pre

analysis. If the battery voltage drops below 12.6V

within 2min, the charger will go into error mode.

The charging sequence will be stopped.

Long-term charging

After the battery is fully charged, the charger will go

in to Sleep Mode. This is indicated by all battery

LEDs slowly pulsating. This mode has a very low

power consumption.

After a week in Sleep Mode, the charger will

wake up and begin a new charging cycle.

The charger will also wake up and start a

charging cycle if battery voltage drops below 12.6V.

10 English

Additional charger functionality

Temperature based voltage compensation

The charger automatically adjusts the charging

voltage to the correct level according to the

ambient temperature. The default ambient

temperature is 20°C. Voltage is reduced for

higher ambient temperatures and increased for

lower ambient temperatures. The correct amount

is ±0.03V/°C. Max temperature compensate

charging voltage is 15.3 V.

14.7V button

Some batteries require a higher charging voltage

than other batteries. If the 14.7V button is

activated the initial charging voltage will be 0.3V

higher than the standard level.

Before activating this button, the 14.7V charge

voltage requirement should be conrmed. If a

battery requires this higher charge voltage, it will

be described on the battery.

Power Supply mode

Some cars can lose important information and

settings if the battery is disconnected. This charger

can be used as a constant power supply during a

battery exchange.

To use this function, the charger will need a

parallel load to be able to keep the voltage during

battery exchange. If not, the charger will go into

Error Mode due to zero-current detection when the

battery is disconnected from the car.

Andere Handbücher für SmartCharge 701515

Inhaltsverzeichnis

Sprachen:

Andere DEFA Akkuladegerät Handbücher

DEFA

DEFA REDARC SBC1230-S Bedienungsanleitung

DEFA

DEFA MultiCharger 1203 Handbuch

DEFA

DEFA WorkShopCharger 2.0 35A Bedienungsanleitung

DEFA

DEFA PowerSystems 1x15 Bedienungsanleitung

DEFA

DEFA MultiCharger 40A 24V Bedienungsanleitung

DEFA

DEFA eRange ACC 710346 Bedienungsanleitung

DEFA

DEFA REDARC SmartCharge 4A Bedienungsanleitung

DEFA

DEFA SmartCharge 6A Bedienungsanleitung

DEFA

DEFA WorkShopCharger 35A Bedienungsanleitung

DEFA

DEFA CLU MK1 Bedienungsanleitung

DEFA

DEFA WorkshopCharger DWSC125 Bedienungsanleitung

DEFA

DEFA 1204R Flex Bedienungsanleitung

DEFA

DEFA MultiCharger 1x12A Bedienungsanleitung

DEFA

DEFA MultiCharger 1205R Flex Bedienungsanleitung

DEFA

DEFA WorkShopCharger 35A Bedienungsanleitung

DEFA

DEFA WorkShopCharger 35A Bedienungsanleitung

DEFA

DEFA 125A Bedienungsanleitung

DEFA

DEFA MultiCharger 1x7 Bedienungsanleitung

DEFA

DEFA MultiCharger Bedienungsanleitung

DEFA

DEFA Solid Bedienungsanleitung

DEFA

DEFA ShowroomCharger 50A Bedienungsanleitung

DEFA

DEFA MultiCharger 1210 Flex Bedienungsanleitung

DEFA

DEFA MultiCharger 1x20A Bedienungsanleitung

DEFA

DEFA MultiCharger 1x35A Bedienungsanleitung

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung