Dell PERC 5/i Bedienungsanleitung

Deploying the Dell™ PERC Adapter

CAUTION: Many repairs may only be done by a certified service technician.

You should only perform troubleshooting and simple repairs as authorized in

your product documentation, or as directed by the online or telephone service and

support team. Damage due to servicing that is not authorized by Dell is not covered

by your warranty. Read and follow the safety instructions that came with the system.

NOTE: For information on removing and reinstalling system parts, see the system's

Hardware Owner's Manual at support.dell.com/manuals.

NOTE: For more information on your storage controller and a detailed set of

instructions, see the relevant storage controller documentation at

support.dell.com/manuals.

This document provides a set of high level installation and removal instructions

for your Dell PowerEdge™ RAID Controllers (PERC) and battery.

Removing the PERC Adapter

Ensure that there is no preserved cache on the PERC adapter. See "Managing

Preserved Cache" on page 4.

Perform a controlled shutdown of the system and attached peripherals.

Disconnect the system from the electrical outlet and remove the system cover.

Remove the storage controller from the system's PCI-E slot. See Figure 1-1.

Installing the PERC Adapter

Perform a controlled shutdown of the system and attached peripherals.

Disconnect the system from the electrical outlet and remove the system cover.

Install the storage controller in the appropriate PCI-E slot and connect all

the cables to the storage controller. See Figure 1-1.

Replace the system cover.

Reconnect the system to its electrical outlet and turn the system on,

including any attached peripherals.

February 2010

Figure 1-1. Removing and Installing the PERC Adapter

Replacing the BBU on a PERC 5/i, PERC 6/i, PERC H700, or PERC H800

Ensure that there is no preserved cache on the PERC adapter. See "Managing

Preserved Cache" on page 4.

Perform a controlled shutdown of the system and attached peripherals.

Disconnect the system from the electrical outlet and remove the system cover.

Remove the Battery Backup Unit (BBU) from the plastic mounting shroud

in your system and disconnect the battery cable.

Re-connect the BBU to the controller by inserting the end of the battery cable

into the connector on the controller.

1PCI-E slot 2PERC adapter

3DIMM 4tabs (2)

Replacing the TBBU on a PERC 5/E, PERC 6/E, PERC H700, or PERC H800

NOTE: The Transportable Battery Backup Unit (TBBU) on the storage controller

consists of a DIMM and a BBU.

Ensure that there is no preserved cache on the PERC adapter. See "Managing

Preserved Cache" on page 4.

Perform a controlled shutdown of the system and attached peripherals.

Disconnect the system from the electrical outlet and remove the system cover.

Remove the storage controller from the system. Press down on the tabs at each

edge of the DIMM slot and lift the TBBU assembly off the storage controller.

See Figure 1-1.

Disconnect the battery cable from both ends and press out on the battery clips

rotating the battery out of the DIMM. See Figure 1-2.

Figure 1-2. Removing and Installing the Battery and Battery Cable on the DIMM

Unpack the new TBBU and follow all antistatic procedures.

Insert one end of the battery cable into the connector on the DIMM and the

other end into the connector on the new battery.

1battery cable 2connector on the DIMM 3DIMM

4battery 5connector on the battery

Place the top edge of the battery over the top edge of the DIMM so that the

arms on the side of the battery fit into their sockets on the DIMM.

See Figure 1-2.

Align the keyed edge of the DIMM to the physical divider on the memory

socket to avoid damage to the module.

Insert the DIMM in the memory socket. Apply a constant, downward pressure

on both ends or on the middle of the DIMM until the retention clips fall in

the allotted slots on either side of the DIMM. See Figure 1-2.

Managing Preserved Cache

If a virtual disk becomes offline or is deleted because of missing physical disks,

the controller preserves the dirty cache from the virtual disk. The preserved dirty

cache, known as pinned cache, is preserved until you import the virtual disk or

discard the cache.

CAUTION: If there are any foreign configurations, it is strongly advised that you

import the foreign configuration before you discard the preserved cache. Otherwise,

you lose data that belongs to the foreign configuration.

Turn on the system.

Press <Ctrl>< R> when prompted by the BIOS screen.

If there is only one controller, the

Virtual Disk Management

screen for that

controller is displayed. If there is more than one controller, the

Main Menu

displayed. The

Main Menu

lists the RAID controllers. Use the arrow keys to

select the RAID controller, and press <Enter> to access the management

menus for the controller.

On the

Virtual Disk Management

screen, use the arrow keys to highlight the

Controller

field. Press <F2> to display the menu and select

Manage

Preserved Cache

. The

Manage Preserved Cache

screen displays the affected

virtual disks.

NOTE: If there is no preserved cache, the Manage Preserved Cache option is

disabled and no further action is required. Exit the configuration utility.

You can choose to discard the cache on the

Manage Preserved Cache

screen.

For more information about importing and preserving the cache contents, see the

Dell PowerEdge RAID Controller (PERC) H700 and H800 documentation at

support.dell.com/manuals.

____________________

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.

is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, and PowerEdge are trademarks of Dell Inc.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the

marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade

names other than its own.

部署 Dell™ PERC 适配器

警告 : 多数维修只能由经认证的维修技术人员进行。您只能根据产品说明文件

中的授权或者在联机或电话服务和支持小组的指导下进行故障排除和简单

的维修。未经 Dell 授权的维修所造成的损坏不在保修范围之内。请阅读并遵循

系统附带的安全说明。

注: 有关卸除和重新安装系统部件的信息，请参阅系统的 Hardware Owner's

Manual （硬件用户手册），它位于 support.dell.com/manuals

注: 有关存储控制器的更多信息和详细的指令集，请参阅在

support.dell.com/manuals 上的相关存储控制器的说明文件

此说明文件提供一组用于 Dell PowerEdge™ RAID Controllers (PERC) 和电池

的高级安装和卸除指令

。

卸下 PERC 适配器

请确保在

PERC

适配器上没有保留的高速缓存。请参阅第

页上的 “管理

保留的高速缓存”。

执行系统和接的外围设备的控制性关闭。

断开系统与电源插座的接并卸下系统护盖。

从系统的

PCI-E

插槽卸除存储控制器。请参阅图

1-1

。

安装 PERC 适配器

执行系统和接的外围设备的控制性关闭。

断开系统与电源插座的接并卸下系统护盖。

在相应的

PCI-E

插槽安装存储控制器并将所有电缆接至存储控制器。请

参阅图

1-1

。

装回系统护盖。

将系统重新接至电源插座，并打开系统（包括所有接的外围设备）。

2010 年2 月

图1-1. 卸除和安装 PERC 适配器

装回在 PERC 5/i、PERC 6/i、PERC H700 或PERC H800 上的 BBU

请确保在

PERC

适配器上没有保留的高速缓存。请参阅第

页上的 “管理

保留的高速缓存”。

执行系统和接的外围设备的控制性关闭。

断开系统与电源插座的接并卸下系统护盖。

从系统的塑料安装护盖卸除电池备份单元

(BBU)

并断开电池电缆。

通过将电池电缆的一端插入到控制器上的接器重新将

BBU

接至控制器。

1PCI-E 插槽 2PERC 适配器

3DIMM 4卡舌（2 个）

装回 PERC 5/E、PERC 6/E 、PERC H700 或PERC H800 上的 TBBU

注: 存储控制器上的 Transportable Battery Backup Unit (TBBU 便携式电池备份单

元) 包括 DIMM 和BBU

请确保在

PERC

适配器上没有保留的高速缓存。请参阅第

页上的 “管理

保留的高速缓存”。

执行系统和接的外围设备的控制性关闭。

断开系统与电源插座的接并卸下系统护盖。

从系统卸除存储控制器。按下在

DIMM

插槽上每边的卡舌将

TBBU

部件

从存储控制器提出。请参阅图

1-1

。

将电池电缆两端都断开接并按电池夹子将电池从

DIMM

旋转取出。请

参阅图

1-2

。

图1-2. 在DIMM 上卸除和安装电池和电池电缆

打开

TBBU

包装，并遵循所有的防静电步骤。

将电池电缆的一端插入

DIMM

上的接器，将另一端插入新电池上的

接器。

1电池电缆 2DIMM 上的连接器 3DIMM

4电池 5电池上的连接器

将电池的顶部边缘放在

DIMM

的顶部边缘之上，以便电池一侧的支臂可

装入

DIMM

上的插槽中。请参阅图

1-2

。

将

DIMM

的键槽边缘与内存插槽上的物理隔板对齐，以避免损坏模块。

将

DIMM

插入内存插槽中。在

DIMM

两侧或中间均匀地向下施加压力，

直至固定夹插入

DIMM

任一侧上分配的插槽中。请参阅图

1-2

。

管理保留的高速缓存

如果虚拟磁盘脱或由于物理磁盘丢失被删除，则控制器会保留虚拟磁盘的

已占用高速缓存。保留的已占用高速缓存也称为已驻留高速缓存，它会一直

保留到您导入虚拟磁盘或放弃高速缓存为止。

警告 : 如果存在任何外部配置强烈建议您在放弃保留高速缓存之前导入外部

配置。否则可能会丢失属于外部配置的数据。

打开系统电源。

请在出现

BIOS

屏幕提示时按

组合键。

如果仅有一个控制器，则显示该控制器的

Virtual Disk Management

（虚

拟磁盘管理）屏幕。如果有多台控制器，则会显示主菜单。该主菜单列出

RAID

控制器。使用箭头键选择

RAID

控制器，然后按

<Enter>

键访问控

制器的管理菜单。

在

Virtual Disk Management

（虚拟磁盘管理）屏幕，使用箭头键高亮度

显示控制器字段。按

<F2>

键显示该菜单并选择

Manage Preserved Cache

（管理保留的高速缓存）。

Manage Preserved Cache

（管理保留的高速缓

存）屏幕显示受影响的虚拟磁盘。

注: 如果没有保留的高速缓存，Manage Preserved Cache（管理保留的高速

缓存）选项被禁用并且无需进一步操作退出配置公用程序

您可以在

Manage Preserved Cache

（管理保留的高速缓存）屏幕上选择放

弃高速缓存。

有关导入和保留高速缓存内容的更多信息，请参阅 support.dell.com/manuals

上的 Dell PowerEdge RAID Controller (PERC) H700 和H800 说明文件。

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Dell Controller Handbücher

Dell

Dell PowerConnect W-650 Bedienungsanleitung

Dell

Dell UCS-51 Bedienungsanleitung

Dell

Dell USC Bedienungsanleitung

Dell

Dell PowerConnect W-6000 Bedienungsanleitung

Dell

Dell PowerConnect W-620 Bedienungsanleitung

Dell

Dell EMC PowerEdge VRTX Bedienungsanleitung

Dell

Dell SC4020 Bedienungsanleitung

Dell

Dell PowerEdge RAID Controller S100 Bedienungsanleitung

Dell

Dell PowerEdge FX2 Bedienungsanleitung

Dell

Dell iDRAC Anleitung zur Verwendung

Dell

Dell PowerEdge M1000e Bedienungsanleitung

Dell

Dell PowerEdge Bedienungsanleitung

Dell

Dell PowerConnect W-650 Bedienungsanleitung

Dell

Dell W-7030 Bedienungsanleitung

Dell

Dell Dial Totem Bedienungsanleitung

Dell

Dell SC8000 Kurzanleitung

Dell

Dell CMC Handbuch

Dell

Dell 3-DNS Service-Handbuch

Dell

Dell Networking W-7024 Bedienungsanleitung

Dell

Dell PowerEdge 2650 Bedienungsanleitung

Dell

Dell W-7205 Series Bedienungsanleitung

Dell

Dell PowerEdge Series Gebrauchs- und Pflegehandbuch

Dell

Dell PowerVault 660F Bedienungsanleitung

Dell

Dell PowerEdge Expandable RAID Controller 3 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch