Dell EMC ME4 Series Bedienungsanleitung

Dell EMC ME4 Series ME412 and ME424

Expansion Enclosures

Getting Started Guide

Regulatory Model: E09J, E10J

Regulatory Type: E09J001, E10J001

August 2018

Rev. A00

Notes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make better use of your product.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid

the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Other trademarks may be trademarks of their respective owners.

Chapter 1: Setting up the ME4 Series expansion enclosure............................................................4

Chapter 2: Other information you may need.................................................................................. 5

Chapter 3: Installation safety precautions..................................................................................... 6

Chapter 4: NOM information ........................................................................................................ 7

Chapter 5: Technical specifications...............................................................................................8

Contents

Contents 3

Setting up the ME4 Series expansion

enclosure

Consider the following best practices when setting up an ME4 Series expansion enclosure.

●Before connecting any cables between the storage system and the host server or expansion enclosure, physically label each

port and connector.

●Always follow proper power-up and power-down procedures when cycling power across the network. Verify that critical

network components are on separate power circuits.

WARNING: If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack

environment may be greater than room ambient temperature. Therefore, consideration should be given to

installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified

by the manufacturer.

NOTE: This product is intended for restricted access locations, such as a dedicated equipment room or equipment closet.

Safety warnings

Electrical disconnection warning

The system may have more than one PSU cable. To reduce the risk of electrical

shock, a trained service technician may need to disconnect all PSU cables before

servicing the system.

CAUTION: Class I laser radiation when open, avoid exposure to beam.

WARNING: Laser radiation, avoid direct exposure to beam.

The unit is certified in the U.S. to conform to the requirements of DHHS 21 CFR,

chapter 1 Subchapter J for Class I (1) laser products, and elsewhere is certified as

a Class I laser product conforming to the requirements of IEC 60825-1.

Class I laser products are not considered to be hazardous. The laser system and

unit are designed so there is never any human access to laser radiation above a

Class I level during normal operation, user maintenance or prescribed service

condition.

4 Setting up the ME4 Series expansion enclosure

Other information you may need

To install the storage system, you may need the following additional information:

NOTE: See the Enterprise Products Safety, Environmental, and Regulatory Information that shipped with your storage

system. Warranty information is included as a separate document.

●The ME4 Series Storage System Deployment Guide provides information about cabling storage system hardware

components and configuring a new storage system.

●The ME4 Series Storage System Administrator's Guide describes how to use the ME Storage Manager to manage ME4

Series storage systems.

Other information you may need 5

Installation safety precautions

Always follow these safety precautions to avoid injury and damage to storage system equipment.

If equipment described in this guide is used in a manner not specified by the documentation, the protection provided by the

equipment could be impaired. For your safety and protection, observe the rules described in the following sections.

Follow these safety precautions:

●It is recommended that only individuals with rack-mounting experience install the system in a rack.

●Make sure the storage system is always fully grounded to prevent damage from electrostatic discharge.

●When handling the storage system hardware, use an electrostatic wrist guard (not included) or a similar form of protection.

The chassis must be mounted in a rack. The following safety requirements must be considered when the chassis is being

mounted:

●The rack construction must be capable of supporting the total weight of the installed chassis. The design should incorporate

stabilizing features suitable to prevent the rack from tipping or being pushed over during installation or in normal use.

●To avoid danger of the rack toppling over, slide only one chassis out of the rack at a time.

●The storage system must be operated with low-pressure rear exhaust installation (back pressure created by rack doors and

obstacles not to exceed 5 Pascals [0.5 mm water gauge]).

6 Installation safety precautions

NOM information

The following information is provided on the device described in this document in compliance with the requirements of the

official Mexican standards (NOM):

NOM information

Importer Dell México, S.A. de C.V

Av. Javier Barros Sierra, no 540, Piso 10,

Col. Lomas de Santa Fe

Delegación Álvaro Obregón, Ciudad de México

C.P. 01219

R.F.C: DME9204099R6

Model numbers E09J, E10J

Supply voltage 100–240 VAC

Frequency 50/60 Hz

Current consumption 8.0-3.0A

NOM information 7

Technical specifications

AC power supply specifications

Maximum output power 580 W

Maximum input power 687 W

Maximum input current 8.8 A

Maximum inrush current 20 A

Nominal input voltage operating range 100-240 VAC

Nominal input frequency 50/60 Hz

Physical characteristics

Height 87.9 mm (3.46 in)

Width across mounting flange 483 mm (19.01 in)

Width across enclosure body 443 mm (14.44 in)

Depth from face of mounting flange to back

of enclosure body

576.8 mm (22.71 in)

Depth from face of mounting flange to

rearmost enclosure extremity

602.9 mm (23.74 in)

Depth from face of front panel to rearmost

enclosure extremity

629.6 mm (24.79 in)

Approximate weight (maximum

configuration)

ME412: 28 kg (62 lb); ME424: 25 kg (55 lb)

Approximate weight without drives 4.8 kg (10.56 lb)

8 Technical specifications

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Dell Gehäuse Handbücher

Dell

Dell MD1420 Bedienungsanleitung

Dell

Dell External M1000e t Bedienungsanleitung

Dell

Dell PowerVault MD3000i Installations- und Betriebshandbuch

Dell

Dell PowerVault MD3000 Bedienungsanleitung

Dell

Dell SCv300 Bedienungsanleitung

Dell

Dell E11J Bedienungsanleitung

Dell

Dell PowerVault MD3060e Series Bedienungsanleitung

Dell

Dell PowerVault MD3000 Bedienungsanleitung

Dell

Dell Compellent SC280 Bedienungsanleitung

Dell

Dell OptiPlex 320 Bedienungsanleitung

Dell

Dell DAE2-ATA Anwendungshandbuch

Dell

Dell EMC PowerEdge MX7000 Kurzanleitung

Dell

Dell PowerEdge M1000E BMX01 Bedienungsanleitung

Dell

Dell PowerVault MD1000 Technisches Handbuch

Dell

Dell PowerVault 114T Betriebsanleitung

Dell

Dell PowerVault MD3060e Series Service-Handbuch

Dell

Dell PowerVault MD1120 Bedienungsanleitung

Dell

Dell PowerVault MD1120 Bedienungsanleitung

Dell

Dell PowerVault MD3000i Bedienungsanleitung

Dell

Dell EMC PowerEdge MX7000 Handbuch

Dell

Dell PowerEdge FX2 Bedienungsanleitung

Dell

Dell PowerVault MD3060e Series Bedienungsanleitung

Dell

Dell Dell OptiPlex Micro Bedienungsanleitung

Dell

Dell PowerVault MD3060e Series Kurzanleitung

Beliebte Gehäuse Handbücher anderer Marken

SilentiumPC

SilentiumPC Armis AR5 Handbuch

Pulsar

Pulsar 17/TRP80/DSPR Bedienungsanleitung

Thermaltake

Thermaltake V150 TG Bedienungsanleitung

MSI

MSI MPG SEKIRA 500X Bedienungsanleitung

Antec

Antec Dark fleet DF-10 Bedienungsanleitung

Nexans

Nexans WTC05 Bedienungsanleitung

Peavey

Peavey DS 1502 Bedienungsanleitung

D-Link

D-Link ShareCenter Pro DNS-1550-04 Bedienungsanleitung

Rosewill

Rosewill RX82-U(JBOD) Bedienungsanleitung

QNAP

QNAP SAS JBOD CLI 1.0 Bedienungsanleitung

GAMDIAS

GAMDIAS Talos P1 Bedienungsanleitung

Auvs

Auvs KR615 Bedienungsanleitung

Digitus

Digitus DA-71114 Bedienungsanleitung

CommScope

CommScope FDH 3000 Bedienungsanleitung

FS FHD-FWME4 Bedienungsanleitung

JBL

JBL CS1215T Bedienungsanleitung

Pulsar

Pulsar ARAD-S4 Bedienungsanleitung

Pulsar

Pulsar AWO454 Bedienungsanleitung