Dell KY0730481 Installationshandbuch

Matchprint

Professional Server v3.0

for Xerox DocuColor 12

Hardware Installation and Startup Guide

Dell Precision 650

Part number - KY0730481

Trademarks

Matchprint is a trademark of Kodak Polychrome Graphics. Kodak is a trademark of Eastman Kodak Company. All trademarks and registered

trademarks used herein are the property of their respective owners.

January 2003. Revision B. Matchprint Professional Server IIx v3.0

Matchprint Professional Server IIx for Xerox: Hardware Installation and Startup

Table of Contents

INTRODUCTION ...........................................................................................................................................7

UNPACKING.................................................................................................................................................7

CART ASSEMBLY......................................................................................................................................11

SERVER INSTALLATION AND CABLING................................................................................................12

MATCHPRINT PROFESSIONAL SERVER SYSTEM STARTUP .............................................................18

PRINTER SETUP........................................................................................................................................26

PRINTER CALIBRATION...........................................................................................................................28

Spectrocam Setup ..................................................................................................................................................... 28

Calibration Procedure ............................................................................................................................................... 29

Calibrating with Scanner .......................................................................................................................................... 32

Calibrating with Spectrocam .................................................................................................................................... 32

SYSTEM TROUBLESHOOTING ................................................................................................................35

TECHNICAL SUPPORT .............................................................................................................................36

Matchprint Professional Server IIx for Xerox: Hardware Installation and Startup

Revision History

Revision A, October 2002 Initial Release. MPS V3.0

Revision B, January 2003 MPS IIx V3.0. Release of hardware server Dell Precision 650.

Matchprint Professional Server IIx for Xerox: Hardware Installation and Startup

Product Safety and Compliance

Warning

Do not modify or use any AC power cord other than the one included with shipping.

• In some cases, the supplied power cord may not be compatible with the AC wall outlet in your

region. If this is true, you must obtain a suitable power cord that meets the following criteria:

• The cord must be rated for use at the AC voltage available, with a current rating that is at least

125% of the current rating of the product.

• The AC plug end must be terminated in a grounding-type male plug designed for use in your

region. The plug ends must be labeled or marked to indicate they have been certified by an

agency acceptable in your region.

• The connector at the product end must be an IEC 320, sheet C13, female connector.

Warning

1. The user must never remove chassis covers. Some system circuitry retains voltage even when

the system is turned off. Only qualified service technicians should remove chassis covers.

2. There are no user-serviceable components in the Matchprint Professional Server. Refer all

system repairs to a qualified service technician.

Warning

The power supply voltage standby circuit is active when the computer is turned off. Ensure that the

computer is disconnected from its power source and from all telecommunication links, networks, or

modem lines whenever the chassis cover is removed. Do not operate the computer with the cover

removed. Only qualified service technicians should remove chassis covers if repair or component

replacement is required.

Warning

Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent

type recommended by the equipment manufacturer. Discard used batteries according to

manufacturer’s instructions.

Warning

As with all flat panel LCD displays, the cold cathode fluorescent lamp in the LCD panel contains a

small amount of mercury. Please follow local ordinances or regulations for disposal.

Matchprint Professional Server IIx for Xerox: Hardware Installation and Startup

Agency Approvals

U.S. FCC Class B

UL 1950 standard testing

Canada Canadian EMI Class A

CSA 950

Europe CISPR 22 Class B

CE Mark

EN 60950 LVD

The radiated and conducted emissions are per EN 55022 class B limits.

The radiated and conducted immunity are per EN 55024 class B limits.

The Matchprint Professional Server fulfills the following European Directives and their current

amendments:

73/23/EEC, Low Voltage Directive (LVD) and

89/336 EEC Electromagnetic Compatibility Directive.

Dieses Produkt "IMPS" erfuellt die Anforderungen der folgenden europaeischen Richtlinien und deren

derzeit gueltigen Ergaenzungen:

73/23/EWG Niederspannungsrichtlinie

89/336/EWG Richtlinie ueber elektromagnetische Vertraeglichkeit

U.S. FCC Class B Emissions

Canada Canadian EMI Class B Emissions

ICES-003

Radio Frequency Interference Notice (USA)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to

operate the equipment. The customer is responsible for ensuring compliance of the modified product. Only

peripherals (computer input/output devices, terminals, printers, etc.) that comply with FCC class B limits may be

attached to this computer product. Operation with non-compliant peripherals is likely to result in interference to radio

and TV reception.

All cables used to connect peripherals must be shielded and grounded. Operation with cables, connected to

peripherals that are not shielded and grounded may result in interference to radio and TV reception.

If a Class A device is installed within this system, then the system is considered a Class A system. In this

configuration, operation of this equipment in a residential area is likely to cause harmful interference.

Radio Frequency Interference Notice (CDN)

This Class B digital apparatus complies with Canadian ICES-003.

Matchprint Professional Server IIx for Xerox: Hardware Installation and Startup

Introduction

This document is a guide to setting up the Matchprint Professional Server, connecting to a Xerox

DocuColor 12 Copier/Printer, and performing a basic calibration test to confirm the hardware and cabling

are functioning properly. This document covers:

• Unpacking the Matchprint Professional Server IIx

• Inspecting the Matchprint Professional Server hardware for loose components or shipping

damage

• Setting up and cabling

• System startup and software initialization

• Calibrating the printer to test the Matchprint Professional Server hardware by printing and

scanning the calibration test page.

Unpacking

The Matchprint Professional Server comes in three boxes. The optional cart comes in a fourth box.

Server and Monitor Cart (optional)

Unpack the Matchprint Professional Server according to the following instructions.

A graphic on the top of the smaller box shows how it should be unpacked.

The steps that follow show this in greater detail.

Matchprint Professional Server IIx for Xerox: Hardware Installation and Startup

1. Open the top of the smaller Dell box. This

contains the Monitor.

2. Carefully flip the box over with the flaps

out.

3. Pull the box up, leaving the contents on

the table.

4. Remove the packaging from the monitor

and cabling.

The contents of the monitor box should be as

displayed here.

The video cable (blue connectors) is already

connected to the back of the monitor.

Note: The digital cable (white connectors) is

not used with the Matchprint

Professional Server monitor.

Matchprint Professional Server IIx for Xerox: Hardware Installation and Startup

5. Open the second, larger box

6. Once the box is open, remove the smaller

interior boxes.

7. Remove the Matchprint Professional

Server from the box.

8. Remove the packaging from the server. Remove the cables, keyboard, mouse and

documentation from the accessory box.

Dell Documentation and CDs

Matchprint Professional

Server

Dell Keyboard, Mouse, and Power

Cord

Matchprint Professional Server IIx for Xerox: Hardware Installation and Startup

9. Additional items from Kodak Polychrome Graphics located on the KODAK POLYCHROME

GRAPHICS Matchprint Professional Server Version 3.0 CD* include:

• “HW Install_Rev D”, Matchprint Professional Server v3.0 Hardware Installation and Startup

Guide

• “Matchprint Professional Server Quick Start Guide”

• “Matchprint Professional Server v3 Install Instruct”, Matchprint Professional Server v3.0

Software Installation Guide

• “Matchprint Professional Server v3 System Upgrade P4” Customer upgrade kit instructions

for the Matchprint Professional Server version 3 software upgrade

• “MPSNET~1”, Matchprint Professional Server v3 Network Guide X-D

• “MPSWIN~1”, Matchprint Professional Server Win 2000 Restore X-D CD

*The MPS Documentation folder on this CD contains the following documents in pdf format:

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Dell Server Handbücher

Dell

Dell PowerEdge 2600 Bedienungsanleitung

Dell

Dell PowerEdge C6320 Bedienungsanleitung

Dell

Dell PowerEdge M620 Kurzanleitung

Dell

Dell PowerEdge M910 Kurzanleitung

Dell

Dell PowerEdge 1855 Technisches Handbuch

Dell

Dell External OEMR R710 Kurzanleitung

Dell

Dell PowerEdge R300 Bedienungsanleitung

Dell

Dell PowerEdge R715 Bedienungsanleitung

Dell

Dell POWEREDGE T300 Bedienungsanleitung

Dell

Dell PowerEdge R320 Bedienungsanleitung

Dell

Dell PS-M4110 Bedienungsanleitung

Dell

Dell PowerEdge C6220 II Bedienungsanleitung

Dell

Dell PowerEdge 6800 Technisches Handbuch

Dell

Dell PowerEdge 6600 Leitfaden

Dell

Dell Power Supply C8000 Bedienungsanleitung

Dell

Dell PowerEdge 4600 Bedienungsanleitung

Dell

Dell poweredge VRTX Bedienungsanleitung

Dell

Dell PowerEdge 1500SC Bedienungsanleitung

Dell

Dell PowerEdge T630 Bedienungsanleitung

Dell

Dell E665 Bedienungsanleitung

Dell

Dell PowerEdge 500SC Technisches Handbuch

Dell

Dell OptiPlex 3000 Bedienungsanleitung

Dell

Dell PowerEdge 2410 Bedienungsanleitung

Dell

Dell PowerEdge 860 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Asus

Asus RS700DA-E6 PS4 Bedienungsanleitung

Vertiv

Vertiv Avocent ACS6000 Montage- und Wartungsanleitung

A & T Internationale

A & T Internationale Xserve Service-Handbuch