Dell PowerEdge 2800 Handbuch

www.dell.com | support.dell.com

Dell™ PowerEdge™ Systems

Processor Upgrade

Installation Guide

处理器升级安装指南

Guide d'installation pour la mise

à niveau du processeur

Anleitung zum Prozessor-Upgrade

プロセッサアップグレードイ

ンストールガイド

프로세서 업그레이드

설치 안내서

Guía de instalación para actualización

de procesadores

www.dell.com | support.dell.com

Dell™ PowerEdge™ Systems

Processor Upgrade

Installation Guide

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo and PowerEdge are trademarks of Dell Inc. Intel and Xeon are registered trademarks of Intel

Corporation.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.

Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

May 2007 P/N F6587 Rev. A01

Processor Upgrade Installation Guide 3

This document provides instructions about adding or replacing processors in your system. To take

advantage of future options in speed and functionality, you can add secondary processors or replace

processors in your system.

NOTICE: If the front of your system chassis is labeled with a "II," your system is upgradeable to the Dual-Core

Intel®Xeon®2.8 GHz Processor with 4 MB L2 cache. See www.dell.com and support.dell.com for information

on processor availability and upgrade options for your system.

NOTICE: Before you add or replace a processor, check the latest system BIOS information on the Dell Support

website at support.dell.com, and upgrade the BIOS if necessary.

Each processor and its associated cache memory are contained in a pin-grid array (PGA) package that

is installed in a ZIF socket on the system board. The following subsection describes how to install or

replace the processor in either the primary or secondary processor sockets.

NOTE: In a single processor system, the processor must be installed in the primary processor socket.

NOTE: See your Installation and Troubleshooting Guide for detailed instructions on removing or replacing

components.

Adding or Replacing a Processor

NOTICE: The secondary processor must be the same speed as the primary processor (if applicable).

In addition to the ZIF socket for the primary processor on the system board, other ZIF sockets might

be present to accommodate secondary processors.

The following items are included in the processor upgrade kit:

• Processor

• Heat sink (if applicable)

• Thermal grease

Your upgrade kit may also include a cooling fan.

CAUTION: Before you perform this procedure, read the safety instructions in your Product Information Guide.

Remove the bezel (if applicable).

Turn off the system, including any attached peripherals, and disconnect the AC power from

the electrical outlet.

Open the system.

Remove the processor cooling fans (if applicable).

Remove the center fan bracket or lift up and remove the memory module shroud (if applicable).

NOTICE: The processor and heat sink can become extremely hot. Allow the processor sufficient time to cool

before handling.

NOTICE: When you remove the heat sink, the possibility exists that the processor might adhere to the heat sink

and be removed from the socket. It is recommended that you remove the heat sink while the processor is

still warm.

4Processor Upgrade Installation Guide

If you are installing an additional processor:

Locate the secondary processor socket.

Press the tab on the end of one of the heat-sink retention levers to disengage the lever,

then lift the lever 90 degrees.

Repeat step b for the remaining heat-sink retention lever.

Go to step 7.

If you are upgrading an existing processor:

Press the tab on the end of one of the heat-sink retention levers to disengage the lever,

then lift the lever 90 degrees. See Figure 1-1.

Figure 1-1. Removing and Installing the Heat Sink

heat sink (typical)

heat-sink retention lever (2)

Processor Upgrade Installation Guide 5

Wait 30 seconds for the heat sink to loosen from the processor.

Open the other heat-sink retention lever.

If the heat sink has not separated from the processor, carefully rotate the heat sink in a clockwise,

then counterclockwise, direction until it releases from the processor. Do not pry the heat sink off

the processor.

Lift the heat sink off of the processor and set the heat sink upside down so as not to contaminate

the thermal grease.

Pull the socket-release lever straight up until the processor is released from the socket.

See Figure 1-2.

Figure 1-2. Removing and Installing the Processor

Lift the processor out of the socket and leave the release lever up so that the socket is ready

for the new processor.

Unpack the new processor.

If any of the pins on the microprocessor appear bent, see "Getting Help" in your

Installation

and Troubleshooting Guide

for instructions about obtaining technical assistance.

processor

pin-1 corner of processor

ZIF socket

socket-release lever

pin-1 corner of socket

6Processor Upgrade Installation Guide

Align the pin-1 corner of the processor with the pin-1 corner of the ZIF socket. See Figure 1-2.

NOTE: Identifying the pin-1 corners is critical to positioning the processor correctly.

Identify the pin-1 corner of the processor by locating the tiny gold triangle on one corner of the

processor. Place this corner in the same corner of the ZIF socket identified by a corresponding triangle.

Install the processor in the socket.

NOTICE: Positioning the processor incorrectly can permanently damage the processor and the system when

you turn it on. When placing the processor in the socket, be sure that all of the pins on the processor enter

the corresponding holes. Be careful not to bend the pins.

Ensure that the release lever on the processor socket is positioned all the way up.

With the pin-1 corners of the processor and socket aligned, set the processor lightly in the socket,

ensuring that all pins are matched with the correct holes in the socket.

When the processor is positioned correctly, it drops down into the socket with minimal pressure.

NOTE: Because the system uses a ZIF processor socket, do not use force, which could bend the pins

if the processor is misaligned.

When the processor is fully seated in the socket, rotate the socket release lever back down until

it snaps into place, securing the processor.

Install the heat sink.

If you are upgrading an existing processor, use a clean lint-free cloth to remove the existing grease

from the heat sink.

NOTE: Use the heat sink that you removed in step 6.

If you are installing an additional processor, locate the new heat sink in the processor upgrade kit.

Apply thermal grease evenly to the top of the processor.

Place the heat sink onto the processor. See Figure 1-1.

Close one of the two heat-sink retention levers until it locks. See Figure 1-1.

Repeat for the other heat-sink retention lever.

Processor Upgrade Installation Guide 7

Reinstall the center fan bracket or replace the memory module shroud (if applicable).

If you have added an additional processor, install the processor cooling fan(s) for the new processor.

Replace the processor cooling fans (if applicable).

Close the system.

Reconnect your system and peripherals to their electrical outlets, and turn them on.

As the system boots, it detects the presence of the new processor and automatically changes the system

configuration information in the System Setup program.

Press <F2> to enter the System Setup program, and check that the processor information matches

the new system configuration.

See your

User’s Guide

for instructions about using the System Setup program.

Run the system diagnostics to verify that the new processor operates correctly.

See "Running the System Diagnostics" in your

Installation and Troubleshooting Guide

for information

about running the diagnostics and troubleshooting processor problems.

Replace the bezel (if applicable).

8Processor Upgrade Installation Guide

Andere Handbücher für PowerEdge 2800

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Dell Server Handbücher

Dell

Dell PowerEdge 2650 Bedienungsanleitung

Dell

Dell PowerEdge 8450 Installations- und Betriebshandbuch

Dell

Dell DSS 1510 Bedienungsanleitung

Dell

Dell DX6004S Bedienungsanleitung

Dell

Dell PowerEdge HS5610 Handbuch

Dell

Dell 8TTX3 Handbuch

Dell

Dell PowerEdge FC630 Bedienungsanleitung

Dell

Dell PowerEdge T110 Bedienungsanleitung

Dell

Dell PowerEdge systems 6300 Service-Handbuch

Dell

Dell PowerEdge T610 Bedienungsanleitung

Dell

Dell EMC PowerEdge T340 Handbuch

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PowerEdge T130 Bedienungsanleitung

Dell

Dell Wyse ThinOS T10 Bedienungsanleitung

Dell

Dell PowerEdge R210 Technisches Handbuch

Dell

Dell PowerEdge R905 Technisches Handbuch

Dell

Dell PowerEdge 860 Handbuch

Dell

Dell PowerEdge T710 Bedienungsanleitung

Dell

Dell PowerEdge C6220 Bedienungsanleitung

Dell

Dell POWEREDGE 4300 Bedienungsanleitung

Dell

Dell PowerEdge R610 Bedienungsanleitung

Dell

Dell PowerEdge T430 Bedienungsanleitung

Dell

Dell PowerEdge R230 Bedienungsanleitung

Dell

Dell PowerEdge T420 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Asus

Asus RS700DA-E6 PS4 Bedienungsanleitung

Vertiv

Vertiv Avocent ACS6000 Montage- und Wartungsanleitung

A & T Internationale

A & T Internationale Xserve Service-Handbuch