Dell PowerEdge 6850 Handbuch

Dell™ Rack Installation Guide

Guide d'installation du rack Dell™

Dell™ Rack-Installationshandbuch

Dell™ ラック取り付けガイド

Guía de instalación del rack Dell™

Dell™ Rack Installation Guide

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use

of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data

and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury,

or death.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly

forbidden.

Trademarks used in this text: Dell, the DELL logo, RapidRails and VersaRails are trademarks of

Dell Inc.; Intel, Pentium and Celeron are registered trademarks of Intel Corporation; Microsoft and

Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States

and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming

the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and

trade names other than its own.

November 2007 P/N TR669 Rev. A00

Contents 3

Contents

Safety Instructions. . . . . . . . . . . . . . . . . . . . . 5

SAFETY: Rack Mounting of Systems . . . . . . . . . 5

Installation Instructions . . . . . . . . . . . . . . . . . . 6

Before You Begin . . . . . . . . . . . . . . . . . . . 7

Installation Tasks . . . . . . . . . . . . . . . . . . . 8

Recommended Tools and Supplies. . . . . . . . . . 8

RapidRails Rack Kit Contents. . . . . . . . . . . . . 8

VersaRails Rack Kit Contents. . . . . . . . . . . . . 9

Marking the Rack . . . . . . . . . . . . . . . . . . . . 11

Installing the RapidRails Slide Assemblies. . . . . . . 13

Installing the VersaRails Slide Assemblies. . . . . . . 15

Installing the System in the Rack . . . . . . . . . . . . 17

Installing the Cable Tray

and Cable-Management Arm . . . . . . . . . . . . . . 19

Attaching the Cable Tray to the System . . . . . . 19

Securing the Cable-Management Arm. . . . . . . 19

Routing Cables . . . . . . . . . . . . . . . . . . . . . . 21

4Contents

Dell™ Rack Installation Guide 5

Safety Instructions

Use the following safety guidelines to ensure your own personal safety

and to help protect your system and working environment from potential

damage. For complete safety information, see the Product Information Guide.

SAFETY: Rack Mounting of Systems

Observe the following precautions for rack stability and safety.

Systems are considered to be components in a rack. Thus, “component”

refers to any system as well as to various peripherals or supporting hardware.

CAUTION: Before installing systems in a rack, install the front and side

stabilizers on stand-alone (single) racks or the front stabilizer on racks joined

to other racks. Failure to install stabilizers accordingly before installing systems

in a rack could cause the rack to tip over, potentially resulting in bodily injury

under certain circumstances. Therefore, always install the stabilizer(s) before

installing components in the rack.

CAUTION: After installing system/components in a rack, never pull more than one

component out of the rack on its slide assemblies at one time. The weight of more

than one extended component could cause the rack to tip over and cause injury.

NOTE: Your system is safety-certified as a free-standing unit and as a component

for use in a rack cabinet using the customer rack kit when both the rack cabinet

and rack kit were designed for your system. The installation of your system and rack

kit in any other rack cabinet has not been approved by any safety agencies. It is

your responsibility to have the final combination of system and rack kit in a cabinet

evaluated for suitability by a certified safety agency. The manufacturer disclaims

all warranties and liability in connection with such combinations.

• System rack kits are intended to be installed in an approved rack by

trained service technicians. If you install the kit in any other rack,

be sure that the rack meets the specifications.

• Before working on the rack, make sure that the stabilizers are secured

to the rack, extended to the floor, and that the full weight of the rack

rests on the floor. Install front and side stabilizers on a single rack or

front stabilizers for joined multiple racks before working on the rack.

• Always load the rack from the bottom up, and load the heaviest item

in the rack first.

6Dell™ Rack Installation Guide

• Make sure that the rack is level and stable before extending a component

from the rack.

• Use caution when pressing the component rail release latches and sliding

a component into or out of a rack; the slide rails can pinch your fingers.

• After a component is inserted into the rack, carefully extend the rail into

a locking position, and then slide the component into the rack.

• Do not overload the AC power supply branch circuit that provides power

to the rack. The total rack load should not exceed 80 percent of the branch

circuit rating.

• Ensure that proper airflow is provided to components in the rack.

• Do not step on or stand on any system/component when servicing other

systems/components in a rack.

Installation Instructions

This installation guide provides instructions for trained service technicians

installing one or more systems in an open-frame relay rack or in a rack

cabinet. The RapidRails™ rack kit can be installed without tools in

manufacturer’s rack cabinets that have square holes; the VersaRails™ rack

kit can be installed in most industry-standard rack cabinets that have square

or round holes. The procedures for installing both RapidRails and VersaRails

rack kits are similar. One rack kit is required for each system installed in the

rack.

CAUTION: Do not install rack kit components designed for another system.

Use only the rack kit for your system. Using the rack kit for another system

may result in damage to the system and personal injury.

The RapidRails rack kit can be installed in most industry-standard rack

cabinets.

NOTICE: The RapidRails rack kit is intended to be installed by trained service

technicians in a rack that meets the specifications of American National

Standards Institute (ANSI)/Electronic Industries Association (EIA) standard

ANSI/EIA-310-D-92, International Electrotechnical Commission (IEC) 297, and

Deutsche Industrie Norm (DIN) 41494. One rack kit is required for each system

that is installed in a rack.

Dell™ Rack Installation Guide 7

Before You Begin

Before you begin installing your system in the rack, carefully read “Safety

Instructions”, found earlier in this guide, as well as the safety instructions

found in your Product Information Guide for additional information.

CAUTION: When installing multiple systems in a rack, complete all of the

procedures for the current system before attempting to install the next system.

CAUTION: Rack cabinets can be extremely heavy and move easily on the casters.

Use extreme caution while moving the rack cabinet. Retract the leveling feet

when relocating the rack cabinet. Avoid long or steep inclines or ramps where

loss of cabinet control may occur. Extend the leveling feet for support and to

prevent the cabinet from rolling.

Important Safety Information

Observe the safety precautions in the following subsections when installing

your system in the rack.

CAUTION: You must strictly follow the procedures in this document to protect

yourself as well as others who may be involved. Your system may be very large

and heavy, and proper preparation and planning are important to prevent injury

to yourself and to others. This becomes increasingly important when systems

are installed high up in the rack.

Rack Stabilizer Feet

CAUTION: Before installing systems in a rack, install the front and side

stabilizers on stand-alone (single) racks or the front stabilizer on racks joined

to other racks. Failure to install stabilizers accordingly before installing systems

in a rack could cause the rack to tip over, potentially resulting in bodily injury

under certain circumstances. Therefore, always install the stabilizer(s) before

installing components in the rack.

CAUTION: After installing systems in a rack, never pull more than one system

out of the rack on its slide assemblies at one time. The weight of more than

one extended system could cause the rack to tip over and cause injury.

The stabilizer feet help prevent the rack from tipping over when a system

or other component is pulled out of the rack with the slide assemblies

fully extended. See the documentation provided with the rack cabinet

for instructions on installing and anchoring the stabilizer feet.

8Dell™ Rack Installation Guide

Installation Tasks

Installing a rack kit involves performing the following tasks in their numbered

order:

Marking the rack (if necessary)

Installing the rail assemblies in the rack:

• RapidRails installation

• VersaRails installation

Installing the system in the rack

Installing the cable tray and cable-management arm

Routing cables

Recommended Tools and Supplies

• A #2 Phillips screwdriver

• Masking tape or a felt-tip pen, for use in marking the rack mounting holes

to be used

• A measuring ruler or tape measure

RapidRails Rack Kit Contents

The RapidRails rack kit includes the following items (see Figure 1-1):

• One pair of RapidRails slide assemblies

• One cable-management arm

• One cable-management arm retainer

• One cable tray

• One status indicator cable (if applicable)

• One Velcro cable strap

Andere Handbücher für PowerEdge 6850

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Dell Server Handbücher

Dell

Dell PowerEdge R630 Bedienungsanleitung

Dell

Dell poweredge t330 Bedienungsanleitung

Dell

Dell PowerEdge 6600 Bedienungsanleitung

Dell

Dell PowerEdge C6320 Bedienungsanleitung

Dell

Dell PowerEdge C2100 Bedienungsanleitung

Dell

Dell POWEREDGE T300 Bedienungsanleitung

Dell

Dell PowerEdge C6400 Handbuch

Dell

Dell PowerEdge C6100 Bedienungsanleitung

Dell

Dell External OEMR R210II Bedienungsanleitung

Dell

Dell poweredge VRTX Bedienungsanleitung

Dell

Dell PowerEdge R300 Bedienungsanleitung

Dell

Dell PowerEdge R810 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell DX6000 Bedienungsanleitung

Dell

Dell PowerEdge T610 Bedienungsanleitung

Dell

Dell PowerEdge NF0DD Bedienungsanleitung

Dell

Dell PowerEdge 1400SC Technisches Handbuch

Dell

Dell D560 Bedienungsanleitung

Dell

Dell EMC PowerEdge R750 Handbuch

Dell

Dell PowerEdge T710 Kurzanleitung

Dell

Dell POWEREDGE R710 Bedienungsanleitung

Dell

Dell PowerEdge 4200 Series Bedienungsanleitung

Dell

Dell PowerVault DX6104 Bedienungsanleitung

Dell

Dell S5000 Series Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Asus

Asus RS700DA-E6 PS4 Bedienungsanleitung

Vertiv

Vertiv Avocent ACS6000 Montage- und Wartungsanleitung

A & T Internationale

A & T Internationale Xserve Service-Handbuch