Dell PowerEdge C8000 Bedienungsanleitung

Dell™PowerEdge™

C8000, C8220, C8220X,

and C8000XD

Getting Started

With Your System

系统使用入门

Mengaktifkan Sistem Anda

はじめに

시스템 시작하기

FILE LOCATION: C:\Documents and Settings\margriet\Mes documents\_working files\Dell

dtp\DL1981_Zeus gsg\APCC\EN\R8CH0_GSG_tp.fm

Dell™PowerEdge™

C8000, C8220, C8220X,

and C8000XD

Getting Started

With Your System

Regulatory Model: B10S, B05B, B06B

Regulatory Type: B10S001, B05B001,

B06B001, B06B002

FILE LOCATION: C:\Documents and Settings\margriet\Mes documents\_working files\Dell

dtp\DL1981_Zeus gsg\APCC\EN\R8CH0_GSG_tp.fm

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of

your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of data if

instructions are not followed.

WARNING: A WARNING indicates a potential for property damage, personal

injury, or death.

____________________

Information in this publication is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.

is strictly forbidden.

Trademarks used in this text: Dell™, the DELL logo, Dell Precision™, OptiPlex™, Latitude™,

PowerEdge™, PowerVault™, PowerConnect™, OpenManage™, EqualLogic™, KACE™,

FlexAddress™ and Vostro™ are trademarks of Dell Inc. Intel

, Pentium

, Xeon

, Core™ and

Celeron

are registered trademarks of Intel Corporation in the U.S. and other countries. Microsoft®,

Windows®, Windows Server®, MS-DOS®and Windows Vista®are either trademarks or registered

trademarks of Microsoft Corporation in the United States and/or other countries. Red Hat®and Red

Hat®Enterprise Linux®are registered trademarks of Red Hat, Inc. in the United States and/or other

countries. Novell®is a registered trademark and SUSE ™ is a trademark of Novell Inc. in the United

States and other countries. Oracle®is a registered trademark of Oracle Corporation and/or its affiliates.

Citrix®, Xen®, XenServer®and XenMotion®are either registered trademarks or trademarks of Citrix

Systems, Inc. in the United States and/or other countries. VMware®, Virtual SMP®, vMotion®,

vCenter®, and vSphere®are registered trademarks or trademarks of VMWare, Inc. in the United States

or other countries.

Other trademarks and trade names may be used in this publication to refer to either the entities claiming

the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and

trade names other than its own.

Regulatory Model: B10S, B05B, B06B

Regulatory Type: B10S001, B05B001, B06B001, B06B002

2012 - 09 P/N R8CH0 Rev. A01

Template Last Updated - 2/7/2007 Getting Started With Your System 3

CAUTION: Restricted Access Location

This server is intended for installation only in restricted access locations as

defined where both these conditions apply:

• Access can only be gained by service persons or by users who have been

instructed about the reasons for the restrictions applied to the location

and about any precautions that shall be taken.

• Access is through the use of a tool or lock and key, or other means of

security, and is controlled by the authority responsible for the location.

Installation and Configuration

WARNING: Before performing the following procedure, review and follow the

safety instructions that came with the system.

The PowerEdge C8000 server enclosure is a flexible and scalable 4U

rackmount chassis. PowerEdge C8000 features ten vertically aligned sled bays

which support a full sled or a mixed sled enclosure. A full sled enclosure can

include up to five C8220X double-wide compute sleds, ten C8220 single-wide

compute sleds, or five C8000XD storage sleds. A mixed sled enclosure can

support a mixture of differing sled types.

Unpacking the System

Unpack your system and identify each item.

Installing the Tool-Less Rail Solution

WARNING: Whenever you need to lift the system, get others to assist you. To

avoid injury, do not attempt to lift the system by yourself.

WARNING: The system is not fixed to the rack or mounted on the rails. To avoid

personal injury or damage to the system, you must adequately support the system

during installation and removal.

WARNING: To avoid a potential electrical shock hazard, a third wire safety

grounding conductor is necessary for the rack installation. The rack equipment

must provide sufficient airflow to the system to maintain proper cooling.

CAUTION: When installing rails in a square-hole rack it is important to ensure

that the square peg slides through the square holes.

CAUTION: Square studs must be flush with the rack posts to install properly.

4Getting Started With Your System

Pull on the latch release buttons on the end piece midpoints to open the

rail latches on the front end of the rails



Align the end pieces of the rails on the vertical rack flanges to seat the pegs

in the bottom hole of the first U and the top hole of the second U



Engage the back end of the rail until the latch locks in place



Pull on the latch release buttons on the end piece midpoints to open the

rail latches on the back end of the rails



Align the end pieces of the rails on the vertical rack flanges to seat the pegs

in the bottom hole of the first U and the top hole of the second U



Engage the back end of the rail until the latch locks in place.

Secure the end pieces of the rails to the left and right rack posts with two

10-32 screws



NOTE: The rails can be used in both square-hole and round-hole racks.

Getting Started With Your System 5

Install four cage nuts into the left and right rack posts



Align the two stopping brackets with the left and right rack posts



Secure the two stopping brackets to the left and right rack posts with six

10-32 screws



. Apply 35 in-lbs of torque to the screws.

NOTE: To remove the rails, pull on the latch release button on the end piece

midpoint and unseat each rail.

6Getting Started With Your System

Installing the System

Empty the System

Remove all components from the front of the server enclosure.

To remove a

C8220 single-wide compute sled, p

ress the release latch



and using the handle, pull the sled out of the enclosure



Getting Started With Your System 7

To remove a

C8220X double-wide compute sled, p

ress the release latch



and using the handle, pull the sled out of the enclosure



To remove a

C8000XD storage sled, p

ress the release tab up



and using

the handle, pull the sled out of the enclosure



8Getting Started With Your System

To remove a

power sled, press the release latch up



and using the

handle, pull the sled out of the enclosure



To remove a sled blank,

ress the two release latches and pull the sled

blank out of the enclosure.

Andere Handbücher für PowerEdge C8000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Dell Server Handbücher

Dell

Dell PowerEdge 1955 Bedienungsanleitung

Dell

Dell PowerEdge T20 Betriebsanleitung

Dell

Dell Precision KR019 Bedienungsanleitung

Dell

Dell PowerEdge R640XL Bedienungsanleitung

Dell

Dell PowerEdge 2500 Leitfaden

Dell

Dell Dell DR4300e Bedienungsanleitung

Dell

Dell PowerEdge Bedienungsanleitung

Dell

Dell PowerEdge 8450 Bedienungsanleitung

Dell

Dell EMC ScaleIO Ready Node 14G Bedienungsanleitung

Dell

Dell PowerEdge System 840 MVT01 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

Dell

Dell PowerEdge C2100 Bedienungsanleitung

Dell

Dell Wyse 3030 LT Bedienungsanleitung

Dell

Dell Force10 S25-01-GE-24P Bedienungsanleitung

Dell

Dell EMC VxFlex Ready Node 13G Bedienungsanleitung

Dell

Dell PowerEdge C6320p Bedienungsanleitung

Dell

Dell EMC Core XC750 Handbuch

Dell

Dell POWEREDGE R710 Bedienungsanleitung

Dell

Dell PowerEdge M630p Bedienungsanleitung

Dell

Dell PowerVault 530F Technisches Handbuch

Dell

Dell PowerEdge M630 Bedienungsanleitung

Dell

Dell PowerEdge MP148 Bedienungsanleitung

Dell

Dell EMC PowerEdge T350 3RRTM Handbuch

Dell

Dell PowerEdge R450 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Asus

Asus RS700DA-E6 PS4 Bedienungsanleitung

Vertiv

Vertiv Avocent ACS6000 Montage- und Wartungsanleitung

A & T Internationale

A & T Internationale Xserve Service-Handbuch