Dell PowerEdge R810 Bedienungsanleitung
Dell™ PowerEdge™
R810 Systems
Getting Started
With Your System
Guide de mise en route
Primeiros passos com o sistema
Procedimientos iniciales con el sistema
Dell™ PowerEdge™
R810 Systems
Getting Started
With Your System
Regulatory Model E05S Series
Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you make better use of
your computer.
CAUTION: A CAUTION indicates potential damage to hardware or loss of data
if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage,
personal injury, or death.
____________________
Information in this document is subject to change without notice.
© 2009 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo and PowerEdge are trademarks of Dell Inc.;
Intel and Xeon are registered trademarks of Intel Corporation in the U.S. and other countries;
Microsoft,Windows,Windows Server and Hyper-V are either trademarks or registered trademarks
of Microsoft Corporation in the United States and/or other countries; SUSE is a registered trademark
of Novell, Inc. in the United States and other countries; Citrix and XenServer are trademarks
of Citrix Systems, Inc. and/or more of its subsidiaries, and may be registered in the United States
Patent and Trademark Office and in other countries; VMware is a registered trademark or trademark
(the “Marks”) of VMware, Inc. in the United States and/or other jurisdictions; Solaris is a trademark
of Sun Microsystems, Inc. in the United States and other countries.
Other trademarks and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and
trade names other than its own.
Regulatory Model E05S Series
November 2009 P/N Y849M Rev. A00
Getting Started With Your System 3
Installation and Configuration
WARNING: Before performing the following procedure, review the safety
instructions that came with the system.
Unpacking the System
Unpack your system and identify each item.
Installing the Rails and System in a Rack
Assemble the rails and install the system in the rack following the safety
instructions and the rack installation instructions provided with your system.
4Getting Started With Your System
Optional – Connecting the Keyboard, Mouse, and Monitor
Connect the keyboard, mouse, and monitor (optional).
The connectors on the back of your system have icons indicating which cable
to plug into each connector. Be sure to tighten the screws (if any) on the
monitor's cable connector.
Connecting the Power Cable(s)
Connect the system’s power cable(s) to the system and, if a monitor is used,
connect the monitor’s power cable to the monitor.
Getting Started With Your System 5
Securing the Power Cable(s)
Attach the power cable retention bracket on the right bend of the power
supply handle. Bend the system power cable into a loop as shown in the
illustration and attach to the bracket’s cable clasp.
Plug the other end of the power cable into a grounded electrical outlet or
a separate power source such as an uninterrupted power supply (UPS)
or a power distribution unit (PDU).
Turning On the System
Press the power button on the system and the monitor. The power indicators
should light.
6Getting Started With Your System
Installing the Optional Bezel
Install the bezel (optional).
Complete the Operating System Setup
If you purchased a preinstalled operating system, see the operating system
documentation that ships with your system. To install an operating system for
the first time, see the installation and configuration documentation for your
operating system. Be sure the operating system is installed before installing
hardware or software not purchased with the system.
Supported Operating Systems
• Microsoft
®
Windows Server
®
2008 R2 Standard, Enterprise,
and Datacenter (x64) Editions
• Microsoft Windows Server 2008 Standard and Enterprise (x86) Editions
with SP2
• Microsoft Windows Server 2008 Standard, Enterprise, and
Datacenter (x64) Editions with SP2
• Microsoft Windows Server 2008 Standard and Enterprise (x86) Editions
Getting Started With Your System 7
• Microsoft Windows Server 2008 Standard, Enterprise, and
Datacenter (x64) Editions (with Hyper-V role enabled)
• Microsoft Windows Server 2003 Standard and Enterprise (x86) Editions
• Microsoft Windows Server 2003 Standard and Enterprise (x64) Editions
• Microsoft Windows Server 2003 R2 Standard and Enterprise (x86)
Editions with SP2
• Microsoft Windows Server 2003 R2 Standard, Enterprise,
and Datacenter (x64) Editions with SP2
• Microsoft Windows Essential Business Server 2008 Standard and
Premium (x64) Editions
• Microsoft Windows Server 2008 Hyper-V™
• Microsoft Windows Server 2008 R2 Hyper-V
• Microsoft Hyper-V Server 2008 R2
•SUSE
®
Linux Enterprise Server 11 (x86_64)
• SUSE Linux Enterprise Server 10 (x86_64) with SP3
•Solaris
®
10 10/9 (x86_64) (when available)
•VMware
®
ESX Version 4.0 Update 1
• VMware ESXi Version 4.0 Update 1
•Citrix
®
XenServer™ 5.6 (when available)
NOTE: For the latest information on supported operating systems,
see support.dell.com.
8Getting Started With Your System
Other Information You May Need
WARNING: See the safety and regulatory information that shipped with your
system. Warranty information may be included within this document or as a
separate document.
• The rack documentation included with your rack solution describes
how to install your system into a rack.
•The
Hardware Owner’s Manual
provides information about system
features and describes how to troubleshoot the system and install or
replace system components. This document is available online at
support.dell.com/manuals
.
• Any media that ships with your system that provides documentation
and tools for configuring and managing your system, including those
pertaining to the operating system, system management software,
system updates, and system components that you purchased with
your system.
NOTE: Always check for updates on support.dell.com/manuals and read the
updates first because they often supersede information in other documents.
Obtaining Technical Assistance
If you do not understand a procedure in this guide or if the system does
not perform as expected, see your Hardware Owner’s Manual. Dell™ offers
comprehensive hardware training and certification. See dell.com/training
for more information. This service may not be offered in all locations.
Andere Handbücher für PowerEdge R810
5
Inhaltsverzeichnis
Sprachen:
Andere Dell Server Handbücher
Dell
Dell PowerVault 735N Stücklistenhandbuch
Dell
Dell Dimension 2200 Stücklistenhandbuch
Dell
Dell PowerApp 220 Bedienungsanleitung
Dell
Dell PowerEdge 6600 Bedienungsanleitung
Dell
Dell PowerEdge 4200 Series Bedienungsanleitung
Dell
Dell PowerEdge T320 Bedienungsanleitung
Dell
Dell PowerEdge 2500SC Handbuch
Dell
Dell PowerEdge 2500 Leitfaden
Dell
Dell PowerEdge R805 System Bedienungsanleitung
Dell
Dell PowerVault NX1950 Bedienungsanleitung
Dell
Dell PowerEdge C6100 Bedienungsanleitung
Dell
Dell 3250 Technisches Handbuch
Dell
Dell PowerEdge 1400SC Bedienerhandbuch
Dell
Dell PowerEdge 2850 Bedienungsanleitung
Dell
Dell PowerEdge 7250 Bedienungsanleitung
Dell
Dell ECS EX Series Montageanleitung
Dell
Dell PowerEdge T20 Bedienungsanleitung
Dell
Dell OptiPlex FX170 Bedienungsanleitung
Dell
Dell PowerEdge R320 Kurzanleitung
Dell
Dell PowerEdge External Media System 1434 Bedienungsanleitung
