Dell Wyse Latitude 3480 Bedienungsanleitung
Dell Wyse Latitude 3480 Mobile Thin Client
User Guide
Regulatory Model: P79G
Regulatory Type: P79G001
Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your product.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
©2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks
may be trademarks of their respective owners.
2017 - 07
Rev. A00
Welcome to Dell Wyse Latitude 3480 mobile thin
client
Dell Latitude 3480 is an aordable, commercial-class mobile thin client that delivers relevant features to small and medium-sized businesses
(SMBs). Target customers are across verticals such as nance, federal, commercial, and education. Latitude 3480 Mobile Thin Client
supports Windows 10 IoT Enterprise (WIE10).
1
Welcome to Dell Wyse Latitude 3480 mobile thin client 3
Hardware installation
Dell Wyse Latitude 3480 mobile thin client hardware
installation
For more information about hardware installation, see Dell Wyse Latitude 3480 mobile thin client Quick Start Guide.
Accessing thin client BIOS settings
To access the thin client BIOS settings, do the following:
1 When the system starts, press the F2 key.
The BIOS Setup screen is displayed.
2 Change the BIOS settings as required.
NOTE: To access the boot menu, press the F12 key.
2
4 Hardware installation
Logging in to the Latitude 3480 mobile thin client
Whatever we view during the turn on or during the reboot of thin client device depends on the congurations done by the administrator.
After creating user account, an administrator can congure a user account where a user can either automatically log in or may require user
credentials to log in.
NOTE:
• Ensure that you disable the Unied Write Filter (UWF) before changing a password on the thin client and enable the UWF after
changing a password on the thin client.
• To change the password, hold CTRL+ALT+DEL key combination, and then click Change a password. However, this feature is not
applicable for the User accounts.
3
Logging in to the Latitude 3480 mobile thin client 5
Displays
Connecting to monitor
The Latitude 3480 mobile thin client can connect to external monitors by using either or both of the following ports:
• HDMI port
• VGA port
For more information on conguring a dual monitor display, see Conguring dual monitor display
Conguring dual monitor display
You can use the Screen Resolution window to congure dual monitor settings on your dual monitor capable thin client device.
To open the Screen Resolution window:
1 Log in as an administrator.
2 From Start menu, click Control Panel > Display > Change Display Settings.
The Screen Resolution window is displayed. For detailed instructions on how to congure the screen resolution, go to
www.microsoft.com.
For more information about setting up multiple monitors, refer Dell documentation.
4
6 Displays
Networks
Using Dynamic Host Conguration Protocol (DHCP)
A thin client is congured to obtain its IP address and network congurations from a DHCP server. The DHCP server provides the IP
address or DNS name of the FTP server and the FTP root-path location of the software in Microsoft.msi. This can be used to access
the FTP server by using the DHCP upgrade process.
It is recommended that you congure and upgrade thin clients by using DHCP, as it saves time and eort to complete the processes locally
on multiple thin clients. If a DHCP server is not available, xed IP addresses can be assigned, which must be entered locally for each thin
client.
A DHCP server provides the IP address of the WDM server. For more information on remote administration, see WDM software for remote
administration
Using Domain Name System (DNS)
Thin client devices accept valid DNS names registered on a DNS server that is available to the enterprise intranet. The thin client device
sends a query to the DNS server on the network to resolve hostnames into IP addresses. DNS allows hosts to be accessed by using the
registered DNS names.
The Windows DNS server in Windows 2000 and later versions includes Dynamic DNS (DDNS), and each server registers dynamically with
the Windows DNS server. For information on DHCP entry of DNS domain and server location, see Using Dynamic Host Conguration
Protocol (DHCP).
5
Networks 7
Peripherals
Conguring and using peripherals
The thin client contains the following ports and slots:
• SD card reader
• USB 2.0 port
• VGA port
• Security lock
• AC power
• RJ45 port
• HDMI port
• USB 3.0 port—two ports
• Headset/microphone combo jack
To provide the services through the ports, install the appropriate software for the thin client device.
NOTE:
1 You can install other services and add-ins that are available from the Dell website for free or for a licensing fee.
For more information, see Dell support website.
2 You can congure the thin client device to use Bluetooth- enabled Peripheral. For more information, see Conguring Bluetooth
connections.
Conguring Bluetooth connections
You can use your thin client device with other Bluetooth enabled devices, if they have the Bluetooth capability.
NOTE:
To retain your settings, disable the UWF and congure
NetXClean.
To congure your thin client for Bluetooth connections:
1 Log in as an administrator.
2 Click Start Menu > Control Panel > Device Manager.
The Device Manager window is displayed.
3 Expand Bluetooth Radios, and double-click any Bluetooth icon.
For example, double-click Generic Bluetooth Radio to manage the existing Bluetooth device. You can also update the drivers in the
Update tab.
To add another Bluetooth-enabled device to the thin client device:
a In the control panel, click Devices and Printers.
b Click Add a Device.
The Add a Device wizard is displayed.
6
8 Peripherals
To turn on Bluetooth on the Bluetooth-enabled device, refer to the device documentation and follow the instructions. When the
thin client identies the device, select the device.
4 Click Next and follow the instructions in the wizard.
Peripherals 9
Power state
You can change the power state options of the thin client by following the steps mentioned here:
1 On the taskbar, click Start Menu.
2 From the Start menu, click Power and select any of the options:
•Sleep– Your thin client starts up faster, as this mode uses very less power.
•Shut down– Preferred for orderly closing of the operating system.
•Restart–The thin client device is turned o and turned on instantly.
You can also use the power state options by pressing the ALT+F4 key combination, and then selecting your preferred option from the
drop-down list.
NOTE: If automatic logon is enabled, the thin client will immediately log on to the default user desktop.
7
10 Power state
Andere Handbücher für Wyse Latitude 3480
1
Inhaltsverzeichnis
Andere Dell Server Handbücher
Dell
Dell PowerEdge 2950 Bedienungsanleitung
Dell
Dell EMC VxRail E560 Series Bedienungsanleitung
Dell
Dell Dimension 2400 Series Bedienungsanleitung
Dell
Dell PowerEdge T20 Betriebsanleitung
Dell
Dell PowerEdge T20 Bedienungsanleitung
Dell
Dell EMC PowerEdge E75S Series Handbuch
Dell
Dell PowerEdge R630 Bedienungsanleitung
Dell
Dell PowerEdge R810 Stücklistenhandbuch
Dell
Dell PowerEdge PDU Managed LED Bedienungsanleitung
Dell
Dell PowerEdge C2100 Bedienungsanleitung
Dell
Dell PowerEdge Programmierhandbuch
Dell
Dell PowerEdge C6320 Bedienungsanleitung
Dell
Dell PowerEdge R815 Bedienungsanleitung
Dell
Dell PowerEdge R715 Bedienungsanleitung
Dell
Dell PowerEdge R805 System Bedienungsanleitung
Dell
Dell PowerEdge E31S Series Bedienungsanleitung
Dell
Dell PowerEdge R450 Handbuch
Dell
Dell PowerEdge 350 Bedienungsanleitung
Dell
Dell E69S001 Bedienungsanleitung
Dell
Dell PowerEdge R330 Bedienungsanleitung
