Delta CliQ DRP024V060W1AA Bedienungsanleitung

TECHNICAL DATASHEET

CliQ DIN Rail Power

Supply

24V 60W 1

Phase

/ DRP024V060W1AA

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (November 2020, Rev. 08)

Highlights & Features

•Universal AC input voltage range

•Power will not de-rate for the entire input voltage range

•Power Boost of 150% for 3 seconds

•Full corrosion resistant aluminium casing

•SEMI F47 certified

•Conforms to harmonic current IEC/EN 61000-3-2, Class A

•Conformal coating on PCBAs to protect against common

dust and chemical pollutants

•Hazardous Locations approval to ATEX and Class I, Div 2

•Certified according to IEC/EN/UL 62368-1

Safety Standards

CB Certified for worldwide use

Model Number: DRP024V060W1AA

Unit Weight:0.37 kg (0.82 lb)

Dimensions (L x W x D): 121 x 32 x 120 mm

(4.76 x 1.26 x 4.72 inch)

General Description

The DRP024V060W1AA is part of the CliQ DIN rail power supply series from one of the world’s leading power supply companies, Delta

Electronics Group. The rugged metal has a compact body at only 32mm, which is both shock and vibration resistant according to

IEC 60068-2 standard. The product operates within a wide temperature range from -20°C to +80°C. The DRP024V060W1AA features

universal AC input voltage range from 85Vac to 264Vac and the power will not de-rate for the entire input voltage range. The single phase

power supply unit includes overvoltage, overcurrent, over temperature and short circuit protections. The product features built-in Power

Boost of 150% for 3 seconds. Such feature enables reserve power to be always available for reliable startup of loads with high inrush

current, thus eliminating the need of a more expensive power supply unit at higher power rating. Another great feature is the conformal

coating on the PCBA which allows DRP024V060W1AA to be certified to ATEX and Class I, Div 2 for use in hazardous locations.

Model Information

CliQ DIN Rail Power Supply

Model

Number

Input Voltage Range

Rated Output

oltage

Rated Output Curr

ent

DRP024V060W1AA 85-264Vac (120-375Vdc) 24Vdc 2.50A

Model Numbering

DR P024V

060W

DIN Rail Power Supply Output Voltage Output Power Single Phase CliQ Series Metal Case

TECHNICAL DATASHEET

CliQ DIN Rail Power

Supply

24V 60W 1

Phase

/ DRP024V060W1AA

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (November 2020, Rev. 08)

Specifications

Input Ratings / Characteristics

Nominal Input Voltage 100-240Vac

Input Voltage Range 85-264Vac

Nominal Input Frequency 50-60Hz

Input Frequency Range 47-63Hz

DC Input Voltage Range* 120-375Vdc

Input Current < 1.10A @ 115Vac, < 0.70A @ 230Vac

Efficiency at 100% Load > 86.0% @ 115Vac, > 87.0% @ 230Vac

Max Power Dissipation 0% load < 1.1W @ 115Vac, < 1.6W @ 230Vac

100% load < 9.7W @ 115Vac, < 8.9W @ 230Vac

Max Inrush Current (Cold Start) < 40A @ 115Vac, < 80A @ 230Vac

Leakage Current < 1mA @ 240Vac

*Safety approval according to IEC/EN/UL 60950-1 and IEC/EN/UL 62368-1.

Output Ratings / Characteristics**

Nominal Output Voltage 24Vdc

Factory Set Point Tolerance 24Vdc ± 2%

Output Voltage Adjustment Range 22-28Vdc

Output Current 2.50A (continuously operating at 24)

3.75A (Power Boost for 3

seconds at 24V, refer to the details in

the Functions section)

Output Power 60W (continuously operating at 24V)

90W (Power Boost for 3 seconds at 24V, refer to the details in

the Functions section)

Line Regulation < 0.5% (@ 85-264Vac input, 100% load)

Load Regulation < 1% (@ 85-264Vac input, 0-100% load)

PARD*** (20MHz) < 240mVpp

Rise Time

< 100ms @ nominal input (100% load)

Start-up Time < 3,000ms @ nominal input (100% load)

Hold-up Time > 20ms @ 115Vac,

> 125ms @ 230Vac (100% load)

Dynamic Response

(Overshoot & Undershoot O/P Voltage)

± 5% @ 85-264Vac input, 10-100% load

(Slew Rate: 0.1A/μs, 50% duty cycle @ 5Hz to 1KHz)

Start-up with Capacitive Loads 8,000µF Max

**For power de-rating from 50°C to 80°C, see power de-rating on page 3.

***PARD is measured with an AC coupling mode, 5cm wires, and in parallel with 0.1μF ceramic capacitor & 47μF electrolytic capacitor.

TECHNICAL DATASHEET

CliQ DIN Rail Power

Supply

24V 60W 1

Phase

/ DRP024V060W1AA

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (November 2020, Rev. 08)

Mechanical

Case Cover / Chassis

Aluminium

Dimensions (L x W x D) 121 x 32 x 120 mm (4.76 x 1.26 x 4.72 inch)

Unit Weight 0.37 kg (0.82 lb)

Indicator Green LED DC OK

Cooling System Convection

Terminal Input 3 Pins (Rated 300V/20A)

Output 2 Pins (Rated 300V/20A)

Wire Input / Output AWG 20-14

Mounting Rail Standard TS35 DIN Rail in accordance with EN 60715

Noise (1 Meter from power supply) Sound Pressure Level (SPL) < 40dBA

Environment

Surrounding Air Temperature

Operating

-20°C to +80°C

Storage -25°C to +85°C

Power De-rating Vertical Mounting < 0°C de-rate power by 1% / °C,

> 50°C de-rate power by 2.5% / °C

Horizontal Mounting

< 0°C de-rate power by 1% / °C,

> 50°C de-rate power by 2.5% / °C

> 70°C de-rate power by 4% / °C

Operating Humidity 5 to 95% RH (Non-Condensing)

Operating Altitude 0 to 2,000 Meters (6,560 ft)

Shock Test Non-Operating IEC 60068-2-27, 30G (300m/S²) for a duration of 18ms,

3 times per direction, 18 times in total

Vibration Non-Operating IEC 60068-2-6, 10Hz to 150Hz @ 50m/S² (5G peak);

90 min per axis for all X, Y, Z direction

Over Voltage Category III According to IEC/EN 62477-1

(clearance and creepage distances)

Pollution Degree 2

Protections

Overvoltage 32V ±10%, SELV Output, Hiccup Mode,

Non-Latching (Auto-Recovery)

Overload / Overcurrent > 150% of rated load current, Hiccup Mode,

Non-Latching (Auto-Recovery)

Over Temperature < 80°C Surrounding Air Temperature @ 100% load,

Non-Latching (Auto-Recovery)

Short Circuit Hiccup Mode, Non-Latching

(Auto-Recovery when the fault is removed)

Internal Fuse at L pin T3.15AH

Protection Against Shock Class I with PE* connection

*PE: Primary Earth

TECHNICAL DATASHEET

CliQ DIN Rail Power

Supply

24V 60W 1

Phase

/ DRP024V060W1AA

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (November 2020, Rev. 08)

Reliability Data

MTBF > 500,000 hrs. as per Telcordia SR-332

I/P: 115Vac, O/P: 100% load, Ta: 25°C

Expected Cap Life Time 10 years (115Vac & 230Vac, 50% load @ 40°C)

Safety Standards / Directives

Electrical Equipment for Use in Electrical Power Installations IEC/EN 62477-1

Safety Entry Low Voltage SELV (EN 60950-1)

Electrical Safety SIQ Bauart EN 60950-1, EN 62368-1

UL/cUL recognized UL 60950-1 and CSA C22.2 No. 60950-1 (File No. E191395)

UL 62368-1 and CSA C22.2 No. 62368-1 (File No. E191395)

CSA CSA C22.2 No. 60950-1 and UL 60950-1 (File No. 181564)

CB Scheme IEC 60950-1, IEC 62368-1

Industrial Control Equipment UL/cUL listed UL 508 and CSA C22.2 No. 107.1-01 (File No. E315355)

CSA CSA C22.2 No. 107.1-01 (File No. 181564)

Hazardous Location / ATEX cCSAus CSA C22.2 No. 213-M1987 and ANSI / ISA 12.12.01:2007

[Class I, Division 2, Group A, B, C, D T4, Ta= -20°C to +80°C

(> +50°C derating)]

ATEX EN 60079-0:2009, EN 60079-15:2010 [II 3G Ex nA IIC T4

Gc, Ta= -20°C to +80°C (> +50°C derating)]

Certificate No. EPS 09 ATEX 1 215 X

CE In conformance with EMC Directive 2014/30/EU and

Low Voltage Directive 2014/35/EU

In conformance with Equipment for explosive atmospheres

(ATEX) directive 2014/34/EU

Galvanic Isolation Input to Output 4.0KVac

Input to Ground 1.5KVac

Output to Ground 1.5KVac

TECHNICAL DATASHEET

CliQ DIN Rail Power

Supply

24V 60W 1

Phase

/ DRP024V060W1AA

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (November 2020, Rev. 08)

EMC

Emissions (CE & RE) Generic Standards: CISPR 32, EN 55032, EN 55011,

FCC Title 47: Class B

Immunity Generic Standards: EN 55024

Electrostatic Discharge IEC 61000-4-2 Level 4 Criteria A1)

Air Discharge: 15kV

Contact Discharge: 8kV

Radiated Field IEC 61000-4-3 Level 3 Criteria A1)

80MHz-1GHz, 10V/M, 80% modulation (1kHz)

Electrical Fast Transient / Burst IEC 61000-4-4 Level 3 Criteria A1)

2kV

Surge IEC 61000-4-5 Level 3 Criteria A1)

Common Mode2): 2kV

Differential Mode

: 2kV

Conducted IEC 61000-4-6 Level 3 Criteria A1)

150kHz-80MHz, 10Vrms

Power Frequency Magnetic Fields IEC 61000-4-8 Criteria A1)

1A/Meter

Voltage Dips and Interruptions IEC 61000-4-11 100% dip; 1 cycle (20ms); Self Recoverable

Low Energy Pulse Test (Ring Wave) IEC 61000-4-12 Level 3 Criteria A1)

Common Mode2): 2kV

Differential Mode

: 1Kv

Harmonic Current Emission

IEC/EN 61000-3-2, Class A

Voltage Fluctuation and Flicker

IEC/EN 61000-3-3

Voltage Sag Immunity

SEMI F47 - 0706, at 110Vac

1) Criteria A: Normal performance within the specification limits

2) Asymmetrical: Common mode (Line to earth)

3) Symmetrical: Differential mode (Line to line)

TECHNICAL DATASHEET

CliQ DIN Rail Power

Supply

24V 60W 1

Phase

/ DRP024V060W1AA

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (November 2020, Rev. 08)

Block Diagram

Device Description

1) Input terminal block connector

2) Output terminal block connector

3) DC Voltage adjustment potentiometer

4) DC OK control LED (Green)

5) Universal mounting rail system

TECHNICAL DATASHEET

CliQ DIN Rail Power

Supply

24V 60W 1

Phase

/ DRP024V060W1AA

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (November 2020, Rev. 08)

Dimensions

L x W x D: 121 x 32 x 120 mm (4.76 x 1.26 x 4.72 inch)

Engineering Data

Output Load De-rating VS Surrounding Air Temperature

Note

1. Power supply components may degrade, or

be damaged, when the power supply is

continuously used outside the shaded region,

refer to the graph shown in Fig. 1.

2. If the output capacity is not reduced when the

surrounding air temperature

exceeds its

specification as defined on Page 3 under

“Environment”, the device may run into Over

Temperature Protection. When activated, the

output voltage will go into bouncing mode and

will recover when the surrounding air

temperature is lowered or the load is reduced

as far as necessary to keep the device in

working condition.

3. In order for the device to function in the

manner intended, it is also necessary to keep

a safety distance as recommended in the

safety instructions while the device is in

operation.

4. Depending on the surrounding air temperature

and output load d

elivered by the power

supply, the device can be very hot!

5. If the device has to be mounted in any other

orientation, please contact info@deltapsu.com

for more details.

Fig. 1 De-rating for Vertical Mounting Orientation

< 0°C de-rate power by 1% / °C,

> 50°C de-rate power by 2.5% / °C

De-rating for Horizontal Mounting Orientation

< 0°C de-rate power by 1% / °C,

> 50°C de-rate power by 2.5% / °C,

> 70°C de-rate power by 4% / °C

TECHNICAL DATASHEET

CliQ DIN Rail Power

Supply

24V 60W 1

Phase

/ DRP024V060W1AA

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (November 2020, Rev. 08)

Output Load De-rating VS Input Voltage

Assembly & Installation

The power supply unit (PSU) can be mounted on 35mm DIN rails in accordance with EN 60715. The device should be installed with input

terminal block at the bottom.

Each device is delivered ready to install.

Mounting

In accordance to EN 60950 / UL 60950 and EN 62368 / UL 62368, flexible cables require ferrules.

Use appropriate copper cables designed to sustain operating temperature of at least 75°C or more to fulfill UL requirements.

For stranded wires, it is recommended to use suitable lug to crimp wires.

Dismounting

Fig. 2.1 Mounting

Snap on the DIN rail as shown in Fig. 2.1:

1. Tilt the unit upwards and insert it onto the DIN rail.

2. Push downwards until stopped.

3. Press against the bottom front side for locking.

4. Shake the unit slightly to ensure that it is secured.

Fig. 2.2 Dismounting

To uninstall, pull or slide down the latch with screw driver as

shown in Fig. 2.2. Then slide the power supply unit (PSU) in the

opposite direction, release the latch and pull out the power

supply unit (PSU) from the rail.

No output power de-rating across the entire

input voltage range

TECHNICAL DATASHEET

CliQ DIN Rail Power

Supply

24V 60W 1

Phase

/ DRP024V060W1AA

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (November 2020, Rev. 08)

Safety Instructions

Vertical Mounting

•ALWAYS switch mains of input power OFF before connecting and disconnecting the input voltage to the unit. If mains are not turned

OFF, there is risk of explosion / severe damage.

•To guarantee sufficient convection cooling, please refer to the following instructions to ensure sufficient clearance around

the device.

Vertical Mounting: 50mm (1.97 inch) above and below the device as well as a lateral distance of 20mm (0.79 inch) to other

units.

Horizontal Mounting: 50mm (1.97 inch) above and below the device as well as a lateral distance of 50mm (1.97 inch) to

other units.

•Note that the enclosure of the device can become very hot depending on the surrounding air temperature and load of the power

supply. Risk of burns!

•Only plug in and unplug connectors when power is turned off!

•DO NOT insert any objects into the unit.

•Hazardous voltages may be present for up to 5 minutes after the input mains voltage is disconnected. Do not touch the unit during

this time.

•The power supplies unit must be installed in an IP54 enclosure or cabinet in the final installation. The enclosure or cabinet must

comply with EN 60079-0 or EN 60079-15.

•CAUTION: “For use in a controlled environment”.

•Warning: Explosion Hazard - Substitution of components may impair suitability for Class I, Division 2.

•Warning: Explosion Hazard - Do not disconnect equipment unless the power has been switched off or the area is known to be non-

hazardous.

Horizontal Mounting

TECHNICAL DATASHEET

CliQ DIN Rail Power

Supply

24V 60W 1

Phase

/ DRP024V060W1AA

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (November 2020, Rev. 08)

Functions

Graph illustrating the Start-up Time, Rise Time, and Hold-up Time

Start-up Time

The time required for the output voltage to reach 90% of its final steady state set value, after the input voltage is applied.

Rise Time

The time required for the output voltage to change from 10% to 90% of its final steady state set value.

Hold-up Time

Time between the collapse of the AC input voltage, and the output falling to 95% of its steady state set value.

Inrush Current

Inrush current is the peak, instantaneous, input current measured

and, occurs when the input voltage is first applied. For AC input

voltages, the maximum peak value of inrush current will occur

during the first half cycle of the applied AC voltage. This peak value

decreases exponentially during subsequent cycles of AC voltage.

Dynamic Response

The power supply output voltage will remains within ±5% of its

steady state value, when subjected to a dynamic load from 10 to

100% of its rated current.

50% duty cycle / 5Hz to 1KHz

Inhaltsverzeichnis

Andere Delta Stromversorgung Handbücher

Delta

Delta HES Series Bedienungsanleitung

Delta

Delta CliQ II DRP024V480W3B Series Bedienungsanleitung

Delta

Delta MCS 3000 Bedienungsanleitung

Delta

Delta PMT-36V350W1A Series Bedienungsanleitung

Delta

Delta PMC Series Bedienungsanleitung

Delta

Delta PMC-48V600W1B Series Bedienungsanleitung

Delta

Delta PMC-05V015W1A Series Bedienungsanleitung

Delta

Delta DPS-650AB Bedienungsanleitung

Delta

Delta DRS-24V30W1NZ Bedienungsanleitung

Delta

Delta 24V/8A/PA18AC Bedienungsanleitung

Delta

Delta DVPPS01 Bedienungsanleitung

Delta

Delta CliQ II DRP024V120W3B Series Bedienungsanleitung

Delta

Delta AX Series Bedienungsanleitung

Delta

Delta LZ-16/R Bedienungsanleitung

Delta

Delta LZ-16/R10 Bedienungsanleitung

Delta

Delta PMC-24V100W1AA Bedienungsanleitung

Delta

Delta PMR V320WD Series Bedienungsanleitung

Delta

Delta PMT-24V350W1AK Bedienungsanleitung

Delta

Delta PMF-24V200WC Bedienungsanleitung

Delta

Delta FORCE-GT Series Bedienungsanleitung

Delta

Delta PMC-12V035W1AA Bedienungsanleitung

Delta

Delta LOYTEC LPOW-2415A Bedienungsanleitung

Delta

Delta PMC-12V050W1AA Bedienungsanleitung

Delta

Delta D750 Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung