Delta PMT-24V350W1AK Bedienungsanleitung

TECHNICAL DATASHEET

PMT Panel Mount Power

Supply

24V 350W 1

Phase

/ PMT-24V350W1AK

All parameters are specified at 25°C ambient unless otherwise noted.

www.DeltaPSU.com (August 2013, Rev. 00)

PMT

Highlights & Features

– AC input range selectable by switch

– Full Aluminium casing for light weight and corrosion resistant

handling

– Built-in automatic fan speed control circuit

– MTBF > 700,000 hrs. as per Telcordia SR-332

– Short Circuit / Overvoltage / Overload / Over Temperature

Protections

Safety Standards

CB Certified for worldwide use

Model Number: PMT-24V350W1AK

Unit Weight:0.82 kg

Dimensions (L x W x D): 215 x 115 x 50 mm

General Description

The new PMT series of panel mount power supplies is the latest offering from one of the world’s largest power supply manufacturers

and solution providers - Delta. PMT-24V350W1AK offers a nominal output voltage of 24V with a wide operating temperature range

from -10°C to +70°C and can withstand shock and vibration (in accordance to IEC 60068-2-27 and IEC 60068-2-6 respectively). In

addition to features like overvoltage and overload protections, Delta’s PMT series of panel mount power supplies is unlike many other

brands in the same price level. The PMT series is designed for cost competitive markets without compromising the quality of the

components and product specifications. The series of products has an expected life time of 10 years and will have no output power de-

rating from 100Vac to 132Vac & 180Vac to 264Vac.

Model Information

PMT Panel Mount Power Supply

Model

Number

Input Voltage Range Output

oltage

Output

Curr

ent

PMT-24V350W1AK 90-132Vac, 180-264Vac

(Selectable by Switch) 24Vdc 14.6A

Model Numbering

CC Code

PM T –24V350W 1AK

□

Panel Mount Product Type

T – Enclosed

Output Voltage

Output Power Single Phase No PFC Connector Type

K – Front Face Blank – Without

connector cover

A –

With connector

cover

TECHNICAL DATASHEET

PMT Panel Mount Power

Supply

24V 350W 1

Phase

/ PMT-24V350W1AK

All parameters are specified at 25°C ambient unless otherwise noted.

www.DeltaPSU.com (August 2013, Rev. 00)

Specifications

Input Ratings / Characteristics

Nominal Input Voltage 100-120Vac, 200-240Vac (Selectable by Switch)

Input Voltage Range 90-132Vac, 180-264Vac (Selectable by Switch)

Nominal Input Frequency 50-60Hz

Input Frequency Range 47-63Hz

Input Current < 7.00A @ 115Vac, < 4.00A @ 230Vac

Efficiency at 100% Load > 87.0% @ 230Vac

Max Inrush Current < 50A @ 115Vac, < 60A @ 230Vac

Leakage Current < 3.5mA @ 240Vac

Output Ratings / Characteristics

Nominal Output Voltage 24Vdc

Output Voltage Tolerance ± 2% (initial set point tolerance from factory)

Output Voltage Adjustment Range 20.0-26.4Vdc

Output Current 14.6A

Output Power 350W

Line Regulation ± 0.5% typ.

Load Regulation ± 0.5% typ.

PARD (20MHz) < 150mVpp

Rise Time < 50ms @ nominal input (100% load)

Start-up Time < 1000ms @ nominal input (100% load)

Hold-up Time > 16ms @ 115Vac, > 20ms @ 230Vac

Dynamic Response (Overshoot & Undershoot O/P Voltage) ± 5% @ 10-50% load and 50-100% load

Start-up with Capacitive Loads 8,000µF Max

Mechanical

Case Chassis Aluminium

Case Cover Aluminium

Dimensions (L x W x D) 215 x 115 x 50 mm

Unit Weight 0.82 kg

Indicator Green LED (DC OK)

Cooling System Forced Cooling

Terminal M3.5 x 9 Pins (Rated 300V/20A)

Wire

AWG 20-12

TECHNICAL DATASHEET

PMT Panel Mount Power

Supply

24V 350W 1

Phase

/ PMT-24V350W1AK

All parameters are specified at 25°C ambient unless otherwise noted.

www.DeltaPSU.com (August 2013, Rev. 00)

Environment

Surrounding Air Temperature Operating -10°C to +70°C

Storage -25°C to +85°C

Power De-rating > 50°C de-rate power by 2.5% / °C

< 100Vac de-rate power by 3% / V

Operating Humidity < 95% RH (Non-Condensing)

Operating Altitude 5,000 Meters

Shock Test (Non-Operating) IEC 60068-2-27, Half Sine: 50G for a duration of 11ms

3 times per direction, 18 times in total

Vibration Operating IEC 60068-2-6, Sine Wave: 10Hz to 150Hz @ 25m/S²

(2.5G peak); 90 min per axis for all X, Y, Z direction

Non-Operating IEC 60068-2-6, Random: 5Hz to 500Hz @ 2.09Grms

peak; 20 min per axis for all X, Y, Z direction

Pollution Degree 2

Protections

Overvoltage

< 32.4V, SELV Output, Latch Mode

Overload / Overcurrent < 25A of rated load current, Hicc-up Mode,

Non-Latching (Auto-Recovery)

Over Temperature Hicc-up Mode, Non-Latching

(Auto-Recovery when the fault is removed)

Short Circuit Hicc-up Mode, Non-Latching

(Auto-Recovery when the fault is removed)

Protection Against Shock Class I with PE* connection

*PE: Primary Earth

Reliability Data

MTBF > 700,000 hrs. as per Telcordia SR-332

Expected Cap Life Time 10 years (115Vac & 230Vac, 50% load @ 40°C)

Safety Standards / Directives

Electrical Safety TUV Bauart to EN 60950-1, UL/cUL recognized to

UL 60950-1 and CSA C22.2 No. 60950-1, CB scheme

to IEC 60950-1

CE In conformance with EMC Directive 2004/108/EC and

Low Voltage Directive 2006/95/EC

Material and Parts RoHS Directive 2011/65/EU Compliant

Galvanic Isolation Input to Output 3.0KVac

Input to Ground 1.5KVac

Output to Ground 0.5KVac

TECHNICAL DATASHEET

PMT Panel Mount Power

Supply

24V 350W 1

Phase

/ PMT-24V350W1AK

All parameters are specified at 25°C ambient unless otherwise noted.

www.DeltaPSU.com (August 2013, Rev. 00)

EMC

EMC / Emissions CISPR 22, EN 55022, EN 55011, FCC Title 47: Class B

Immunity to EN 55024

Electrostatic Discharge IEC 61000-4-2 Level 4 Criteria A

Air Discharge: 15kV

Contact Discharge: 8kV

Radiated Field IEC 61000-4-3 Level 3 Criteria A

80MHz-1GHz, 10V/M with 1kHz tone / 80% modulation

Electrical Fast Transient / Burst IEC 61000-4-4 Level 3 Criteria A1)

2kV

Surge IEC 61000-4-5 Level 3 Criteria A

Common Mode2): 2kV

Differential Mode

: 1kV

Conducted IEC 61000-4-6 Level 3 Criteria A

150kHz-80MHz, 10Vrms

Power Frequency Magnetic Fields IEC 61000-4-8 Criteria A1)

10A/Meter

Voltage Dips IEC 61000-4-11 100% dip; 1 cycle (20ms); Self Recoverable

Low Energy Pulse Test (Ring Wave) IEC 61000-4-12 Level 3 Criteria A1)

Common Mode2): 2kV

Differential Mode

: 1kV

Harmonic Current Emission NA

Voltage Fluctuation and Flicker* IEC/EN 61000-3-3

*Fulfills tested conditions

1) Criteria A: Normal performance within the specification limits

2) Asymmetrical: Common mode (Line to earth)

3) Symmetrical: Differential mode (Line to line)

TECHNICAL DATASHEET

PMT Panel Mount Power

Supply

24V 350W 1

Phase

/ PMT-24V350W1AK

All parameters are specified at 25°C ambient unless otherwise noted.

www.DeltaPSU.com (August 2013, Rev. 00)

Block Diagram

TECHNICAL DATASHEET

PMT Panel Mount Power

Supply

24V 350W 1

Phase

/ PMT-24V350W1AK

All parameters are specified at 25°C ambient unless otherwise noted.

www.DeltaPSU.com (August 2013, Rev. 00)

Device Description

1) Input & Output terminal block connector

2) DC voltage adjustment potentiometer

3) DC OK control LED (Green)

4) AC selectable switch

Dimensions

L x W x D: 215 x 115 x 50 mm

TECHNICAL DATASHEET

PMT Panel Mount Power

Supply

24V 350W 1

Phase

/ PMT-24V350W1AK

All parameters are specified at 25°C ambient unless otherwise noted.

www.DeltaPSU.com (August 2013, Rev. 00)

Engineering Data

De-rating

Output De-rating VS. Input Voltage

Note

1. Power supply components may degrade, or

be damaged, when the power supply is

continuously used outside the shaded region,

refer to the graph shown in Fig. 1.

2. If the output capacity is not reduced when the

surrounding air temperature >70

°C, the

device will run into Over Temperature

Protection. When activated, the output

voltage will go into bouncing mode and will

recover

when the surrounding air

temperature is lowered or the load is reduced

as far as necessary to keep the device in

working condition.

To ensure sufficient convection cooling,

always maintain a distance of ≥20mm from

fan ventilated surfaces while the device is in

operation.

Depending on the surrounding air

temperature and output load delivered by the

power supply, the device housing can be

very hot!

5. If the device has to be mounted in any other

orientation, please do not hesitate to contact

info@deltapsu.com for more details.

Fig. 1 De-rating for Vertical and Horizontal Mounting Orientation

> 50°C de-rate power by 2.5% / °C

No output power de-rating for the input

voltage from 100Vac to 132Vac & 200Vac to

264Vac

TECHNICAL DATASHEET

PMT Panel Mount Power

Supply

24V 350W 1

Phase

/ PMT-24V350W1AK

All parameters are specified at 25°C ambient unless otherwise noted.

www.DeltaPSU.com (August 2013, Rev. 00)

Assembly & Installation

ⒶSide Mounting: Fig. 2 and Fig. 3 show the mounting hole locations for power supply assembly onto a metal mounting surface. The

power supply shall be mounted on minimum of 4 mounting holes using M4 screw maximum 5mm length (Refer to Fig. 4). This is

to maintain a safety distance between the screw and internal components.

ⒷBase Mounting: Fig. 2 and Fig. 3 show the mounting hole locations for power supply assembly onto a metal mounting surface. The

power supply shall be mounted on minimum of 4 mounting holes using M4 screw maximum 4mm length (Refer to Fig. 4).

ⒸConnector

ⒹThis surface belongs to customer’s end system or panel where the power supply is mounted.

Base Mounting (Horizontal) Base Mounting (Vertical) Side Mounting (Horizontal)

Fig. 2 Mounting Orientation

– Use flexible cable (stranded or solid) of AWG No. 20-12. The input/output connectors’ allowable current is 23A max per pin. User

should calculate and select the suitable wire specification (type/quantity/diameter) according to actual output current. The torque at

the connector shall not exceed 13Kgf.cm. The insulation stripping length should not exceed 0.275” or 7mm.

– Recommended mounting torque of the product and its mounting accessories is 9~12Kgf.cm.

Fig. 4 Assembly Reference

Only use M4 screw ≤ 5 mm through the base mounting holes at

Ⓐ

This is to keep a safe distance between the screw and internal

components.



Only use M4 screw ≤ 4 mm through the base mounting holes at Ⓑ.

Fig. 3 Mounting Hole Locations and the Safety Distance

For safety reasons, please ensure the mounted device is kept at ≥ 4mm safety distance at all sides from other components and

equipments. In addition, to ensure sufficient convection cooling, always maintain a distance of ≥ 20mm from fan ventilated surfaces

while the device is in operation. Please insert an insulation sheet between the system and product, if the safety distance is < 4mm.

Safety Distance

D1 = 4mm Min.

D2 = 20mm Min.

TECHNICAL DATASHEET

PMT Panel Mount Power

Supply

24V 350W 1

Phase

/ PMT-24V350W1AK

All parameters are specified at 25°C ambient unless otherwise noted.

www.DeltaPSU.com (August 2013, Rev. 00)

Improper Installations

Safety Instructions

– Must select correct AC input voltage before turning on (Refer to the “Device Description” on Page 5).

– The device is not recommended to be placed on low thermal conductive surface. For example, plastics.

– Note that the enclosure of the device can become very hot depending on the ambient temperature and load of the power supply.

Do not touch the device while it is in operation or immediately after power is turned OFF. Risk of burning!

– Do not touch the terminals while power is being supplied. Risk of electric shock.

– Prevent any foreign metal, particles or conductors from entering the device through the openings during installation.

It may cause: - Electric shock; Safety Hazard; Fire; Product failure.

– Warning: When connecting the device, secure Earth connection before connecting L and N. When disconnecting the device,

remove L and N connections before removing the Earth connection. The power supply must be mounted by metal screws onto a

grounded metal surface. It is highly recommended that the Earth terminal on the connector be connected to the grounded metal

surface.

TECHNICAL DATASHEET

PMT Panel Mount Power

Supply

24V 350W 1

Phase

/ PMT-24V350W1AK

All parameters are specified at 25°C ambient unless otherwise noted.

www.DeltaPSU.com (August 2013, Rev. 00)

Functions

Start-up Time

The time required for the output voltage to reach 90% of its set value, after the input voltage is applied.

Rise Time

The time required for the output voltage to change from 10% to 90% of its set value.

Hold-up Time

Hold up time is the time when the AC input collapses and output voltage retains regulation for a certain period of time. The time

required for the output to reach 95% of its set value, after the input voltage is removed.

■Graph illustrating the Start-up Time, Rise Time, and Hold-up Time

Inrush Current

Inrush current is the peak, instantaneous, input current measured

and, occurs when the input voltage is first applied. For AC input

voltages, the maximum peak value of inrush current will occur

during the first half cycle of the applied AC voltage. This peak

value decreases exponentially during subsequent cycles of AC

voltage.

Dynamic Response

The power supply output voltage will remain within ±1000mVpp of

its steady state value, when subjected to a dynamic load from 10

to 50% and 50 to 100% of its rated current.

Dieses Handbuch passt für folgende Modelle

Andere Delta Stromversorgung Handbücher

Delta

Delta DRP024V060W1AZ Bedienungsanleitung

Delta

Delta HDS 7200 Bedienungsanleitung

Delta

Delta PMC-24V150W1AA Bedienungsanleitung

Delta

Delta PCM-48V600W1B Series Bedienungsanleitung

Delta

Delta PMU-27V155WC A Series Bedienungsanleitung

Delta

Delta A9000 Bedienungsanleitung

Delta

Delta PMC-24V050W1AA Bedienungsanleitung

Delta

Delta FORCE-GT Series Bedienungsanleitung

Delta

Delta PMC Series Bedienungsanleitung

Delta

Delta PMR V320WD Series Bedienungsanleitung

Delta

Delta PMU-27V155WC A Series Bedienungsanleitung

Delta

Delta PMT-V350W1A Series Bedienungsanleitung

Delta

Delta PJB-24V100WA Bedienungsanleitung

Delta

Delta PMC-24V600W1RW Bedienungsanleitung

Delta

Delta LYTE II DRL-480W Series Bedienungsanleitung

Delta

Delta HPH-20KA01KAT Bedienungsanleitung

Delta

Delta PMC-12V035W1AA Bedienungsanleitung

Delta

Delta LYTE II Bedienungsanleitung

Delta

Delta LYTE II Bedienungsanleitung

Delta

Delta HDS 3000 Bedienungsanleitung

Delta

Delta PMC-05V035W1AA Bedienungsanleitung

Delta

Delta DRS-24V30W1NZ Bedienungsanleitung

Delta

Delta LYTE DRL-24V480W1A Series Bedienungsanleitung

Delta

Delta CliQ II DRP048V120W1B Series Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung