Delta CliQ II DRP048V120W1B Series Bedienungsanleitung

TECHNICAL DATASHEET

CliQ II DIN Rail Power

Supply

48V 120W 1

Phase

/ DRP048V120W1B

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (December 2018, Rev. 04)

Highlights & Features

•Universal AC input voltage

•Power will not de-rate for the entire input voltage range

•Power Boost of 150% for 5 seconds

•Full corrosion resistant aluminium chassis

•Conformal coating on PCBA to protect against common dust

and chemical pollutants

•Hazardous Locations approval to ATEX and Class I, Div 2

(DRP048V120W1BA)

Safety Standards

CB Certified for worldwide use

Model Number: DRP048V120W1B☐

Unit Weight:0.72 kg (1.59 lb)

Dimensions (L x W x D): 121 x 50 x 123.1 mm

(4.76 x 1.97 x 4.85 inch)

General Description

The CliQ II DIN rail power supply series from one of the world’s leading power supply companies, Delta Electronics Group, offers

output voltage of 48V. These products are encased in rugged yet lightweight full aluminium body that can withstand shock and vibration

according to IEC 60068-2 standard. The series of single phase products can operate over a wide temperature range of -25°C to +80°C.

These products also feature universal AC input voltage range from 85Vac to 264Vac and the power will not de-rate throughout the

entire range. Another great feature is the conformal coating on the PCBA which allows selected models to be certified to ATEX and

Class I, Div 2 for use in hazardous locations. The design conforms to harmonic current emission IEC/EN 61000-3-2, Class A.

Model Information

CliQ II DIN Rail Power Supply

Model

Number

Input Voltage Range Rated Output

oltage

Rated Output Curr

ent

DRP048V120W1B☐ 85-264Vac (120-375Vdc) 48Vdc 2.50A

Model Numbering

DR P048V

120W

□

DIN Rail Power Supply Output Voltage Output Power Single Phase CliQ II Series A - Metal Case,

with Class I, Div 2

N - Metal Case,

without Class I, Div 2

TECHNICAL DATASHEET

CliQ II DIN Rail Power

Supply

48V 120W 1

Phase

/ DRP048V120W1B

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (December 2018, Rev. 04)

Specifications

Input Ratings / Characteristics

Nominal Input Voltage 100-240Vac

Input Voltage Range 85-264Vac

Nominal Input Frequency 50-60Hz

Input Frequency Range 47-63Hz

DC Input Voltage Range* 120-375Vdc

Input Current < 2.20A @ 115Vac, < 1.10A @ 230Vac

Efficiency at 100% Load > 90.0% @ 115Vac, > 91.0% @ 230Vac

Max Inrush Current (Cold Start) < 35A @ 115Vac & 230Vac

Power Factor > 0.99 @ 115Vac, > 0.93 @ 230Vac

Leakage Current < 1mA @ 240Vac

*Fulfills the test conditions for DC input. DC input safety approval can be obtained upon request.

Output Ratings / Characteristics

Nominal Output Voltage 48Vdc

Factory Set Point Tolerance ± 1% (initial set point tolerance from factory)

Output Voltage Adjustment Range 48-56Vdc

Output Current 2.50A (continuously operating at 48V)

3.75A (Power Boost for 5 seconds at 48

V, refer to the details in

the Functions section)

Output Power 120W (continuously operating at 48V)

180W (Power Boost for 5 seconds at 48V

, refer to the details in

the Functions section)

Line Regulation < 0.5% typ. (@ 85-264Vac input, 100% load)

Load Regulation < 1% typ. (@ 85-264Vac input, 0-100% load)

PARD (20MHz) < 200mVpp

Rise Time

< 200ms @ nominal input (100% load)

Start-up Time < 2,000ms @ nominal input (100% load)

Hold-up Time > 20ms @ 115Vac,

> 50ms @ 230Vac (100% load)

Dynamic Response (Overshoot & Undershoot O/P Voltage) ± 2% @ 0-100% load

Start-up with Capacitive Loads 6,500µF Max

TECHNICAL DATASHEET

CliQ II DIN Rail Power

Supply

48V 120W 1

Phase

/ DRP048V120W1B

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (December 2018, Rev. 04)

Mechanical

Case Cover / Chassis

Aluminium

Dimensions (L x W x D) 121 x 50 x 123.1 mm (4.76 x 1.97 x 4.85 inch)

Unit Weight 0.72 kg (1.59 lb)

Indicator Green LED (DC OK)

Cooling System Convection

Terminal Input 3 Pins (Rated 300V/15A)

Output 4 Pins (Rated 300V/15A)

Wire Input / Output AWG 20-12

Mounting Rail Standard TS35 DIN Rail in accordance with EN 60715

Noise (1 Meter from power supply) Sound Pressure Level (SPL) < 40dBA

Environment

Surrounding Air Temperature

Operating

-25°C to +80°C (Cold Start at -40°C)

Storage -40°C to +85°C

Power De-rating Vertical Mounting > 50°C de-rate power by 2.5% / °C

Horizontal Mounting > 50°C de-rate power by 2.5% / °C,

> 70°C de-rate power by 3.5% / °C

Operating Humidity 5 to 95% RH (Non-Condensing)

Operating Altitude 0 to 2,500 Meters (8,200 ft.)

Shock Test Non-Operating IEC 60068-2-27, 30G (300m/S²) for a duration of 18ms,

1 time per direction, 2 times in total

Vibration Non-Operating IEC 60068-2-6, 10Hz to 500Hz @ 30m/S² (3G peak);

60 min per axis for all X, Y, Z direction

Pollution Degree 2

Protections

Overvoltage > 57V, SELV Output, Hiccup Mode,

Non-Latching (Auto-Recovery)

Overload / Overcurrent > 150% of rated load current, Hiccup Mode,

Non-Latching (Auto-Recovery)

Over Temperature < 80°C Surrounding Air Temperature @ 100% load,

Non-Latching (Auto-Recovery)

Short Circuit Hiccup Mode, Non-Latching

(Auto-Recovery when the fault is removed)

Degree of Protection IP20

Protection Against Shock Class I with PE* connection

*PE: Primary Earth

Reliability Data

MTBF > 800,000 hrs. as per Telcordia SR-332

I/P: 115Vac, O/P: 100% load, Ta: 25°C

Expected Cap Life Time

10 years (115Vac & 230Vac, 50% load @ 40°C)

TECHNICAL DATASHEET

CliQ II DIN Rail Power

Supply

48V 120W 1

Phase

/ DRP048V120W1B

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (December 2018, Rev. 04)

Safety Standards / Directives

Electrical Equipment in Power

Installations

EN 50178 / IEC 62103

Electrical Safety SIQ Bauart EN 60950-1

UL/cUL recognized UL 60950-1 and CSA C22.2 No. 60950-1 (File No. E191395)

CB scheme IEC 60950-1

Industrial Control Equipment UL/cUL listed UL 508 and CSA C22.2 No. 107.1-01 (File No. E315355)

CSA CSA C22.2 No. 107.1-01 (File No. 181564)

Hazardous Location / ATEX

(For DRP048V120W1BA)

cCSAus CSA C22.2 No. 213-M1987, ANSI / ISA 12.12.01:2011

[Class I, Division 2, Group A, B, C, D T4, Ta= -25°C to +80°C

(> +50°C derating)]

ATEX EN 60079-0:2009, EN 60079-15:2010

[ II 3G Ex nA nC IIC T4 Gc, Ta= -25°C to +80°C (> +50°C

derating)]

Certificate No. EPS 12 ATEX 1 491 X

CCC GB9254, GB17625.1 and GB4943.1

仅适用于海拔 2000m 以下地区安全使用

CE In conformance with EMC Directive 2014/30/EU and

Low Voltage Directive 2014/35/EU

For DRP048V120W1BA:

In conformance with Equipment for explosive atmospheres

(ATEX) directive 2014/34/EU

Material and Parts RoHS Directive 2011/65/EU Compliant

Galvanic Isolation Input to Output 4.0KVac

Input to Ground 1.5KVac

Output to Ground 1.5KVac

TECHNICAL DATASHEET

CliQ II DIN Rail Power

Supply

48V 120W 1

Phase

/ DRP048V120W1B

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (December 2018, Rev. 04)

EMC

Emissions (CE & RE) CISPR 32, EN 55032, CISPR 11, EN 55011,

FCC Title 47: Class B

Component Power Supply for General Use

EN 61204-3

Immunity EN 55024, EN 61000-6-1, EN 61000-6-2

Electrostatic Discharge IEC 61000-4-2 Level 4 Criteria A1)

Air Discharge: 15kV

Contact Discharge: 8kV

Radiated Field IEC 61000-4-3 Level 3 Criteria A1)

80MHz-1GHz, 10V/M, 80% modulation (1kHz)

Electrical Fast Transient / Burst IEC 61000-4-4 Level 3 Criteria A1)

2kV

Surge IEC 61000-4-5 Level 3 Criteria A1)

Common Mode2): 2kV

Differential Mode

: 1kV

Conducted IEC 61000-4-6 Level 3 Criteria A1)

150kHz-80MHz, 10Vrms

Power Frequency Magnetic Fields IEC 61000-4-8 Criteria A1)

30A/Meter

Voltage Dips

IEC 61000-4-11

100% dip; 1 cycle (20ms); Self Recoverable

Low Energy Pulse Test (Ring Wave) IEC 61000-4-12 Level 3 Criteria A1)

Common Mode2): 2kV

Differential Mode

: 1kV

Harmonic Current Emission IEC/EN 61000-3-2, Class A

Voltage Fluctuation and Flicker IEC/EN 61000-3-3

1) Criteria A: Normal performance within the specification limits

2) Asymmetrical: Common mode (Line to earth)

3) Symmetrical: Differential mode (Line to line)

TECHNICAL DATASHEET

CliQ II DIN Rail Power

Supply

48V 120W 1

Phase

/ DRP048V120W1B

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (December 2018, Rev. 04)

Block Diagram

TECHNICAL DATASHEET

CliQ II DIN Rail Power

Supply

48V 120W 1

Phase

/ DRP048V120W1B

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (December 2018, Rev. 04)

Device Description

1) Input terminal block connector

2) Output terminal block connector

3) DC Voltage adjustment potentiometer

4) DC OK control LED (Green)

5) Universal mounting rail system

Dimensions

L x W x D: 121 x 50 x 123.1 mm (4.76 x 1.97 x 4.85 inch)

TECHNICAL DATASHEET

CliQ II DIN Rail Power

Supply

48V 120W 1

Phase

/ DRP048V120W1B

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (December 2018, Rev. 04)

Engineering Data

Output Load De-rating VS Surrounding Air Temperature

Output Load De-rating VS Input Voltage

Note

1. Power supply components may degrade, or

be damaged, when the power supply is

continuously used outside the shaded region,

refer to the graph shown in Fig. 1.

2. If the output capacity is not reduced when the

surrounding air temperature > 5

0°C, the

device may run into Over Temperature

Protection. When activated, the output

voltage will go into bouncing mode and will

recover when the surrounding air

temperature is lowered or the load is reduced

as far as necessary to keep the device in

working condition.

3. In order for the device to function in the

manner intended, it is also necessary to keep

a safety distance of 20mm (0.79 inch) for

Vertical Mounting or 50mm (1.97 inch) for

Horizontal Mounting with adjacent units while

the device is in operation.

Depending on the surrounding air

temperature and output load delivered by the

power supply, the device can be very hot!

5. If the device has to be mounted in any other

orientation, please contact

[email protected]om for more details.

Fig. 1 De-rating for Vertical Mounting Orientation

> 50°C de-rate power by 2.5% / °C

De-rating for Horizontal Mounting Orientation

> 50°C de-rate power by 2.5% / °C,

> 70°C de-rate power by 3.5% / °C

No output power de-rating across the entire

input voltage range

TECHNICAL DATASHEET

CliQ II DIN Rail Power

Supply

48V 120W 1

Phase

/ DRP048V120W1B

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (December 2018, Rev. 04)

Assembly & Installation

The power supply unit (PSU) can be mounted on 35mm DIN rails in accordance with EN 60715. For Vertical Mounting, the device

should be installed with input terminal block at the bottom. For Horizontal Mounting, the device should be installed with input terminal

block on the left side.

Each device is delivered ready to install.

Mounting

Dismounting

Fig. 2.1 Mounting

Snap on the DIN rail as shown in Fig. 2.1:

1. Tilt the unit upwards and insert it onto the DIN rail.

2. Push downwards until stopped.

3. Press against the bottom front side for locking.

4. Shake the unit slightly to ensure that it is secured.

Fig. 2.2 Dismounting

To uninstall, pull or slide down the latch with screw driver as

shown in Fig. 2.2. Then slide the power supply unit (PSU) in

the opposite direction, release the latch and pull out the power

supply unit (PSU) from the rail.

CAUTION: Must tighten wire to housing (Fig. 3.1) before

plugging into the terminal block connection (Fig. 3.2).

In accordance to EN 60950 / UL 50950, flexible cables require

ferrules. Use appropriate copper cables designed to sustain

operating temperature of 60°C / 75°C or more to fulfill UL

requirements.

Connection

Fig. 3.1 Fig. 3.2

TECHNICAL DATASHEET

CliQ II DIN Rail Power

Supply

48V 120W 1

Phase

/ DRP048V120W1B

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (December 2018, Rev. 04)

Safety Instructions

Vertical Mounting

•ALWAYS switch mains of input power OFF before connecting and disconnecting the input voltage to the unit. If mains are not

turned OFF, there is risk of explosion / severe damage.

•To guarantee sufficient convection cooling, keep a distance of 50mm (1.97 inch) above and below the device as well as a

lateral distance of 20mm (0.79 inch) for Vertical Mounting or 50mm (1.97 inch) for Horizontal Mounting to other units.

•Note that the enclosure of the device can become very hot depending on the surrounding air temperature and load of the power

supply. Risk of burns!

•Only plug in and unplug connectors when power is turned off!

•DO NOT insert any objects into the unit.

•Hazardous voltages may be present for up to 5 minutes after the input mains voltage is disconnected. Do not touch the unit during

this time.

•The power supplies are built in units and must be installed in a cabinet or room (condensation free environment and indoor

location) that is relatively free of conductive contaminants.

•CAUTION: “For use in a controlled environment”.

For DRP048V120W1BA:

•The power supplies unit must be installed in an IP54 enclosure or cabinet in the final installation. The enclosure or cabinet must

comply with EN 60079-0 or EN 60079-15.

•Warning: Explosion Hazard - Substitution of components may impair suitability for Class I, Division 2.

•Warning: Explosion Hazard - Do not disconnect equipment or adjust potentiometer unless the power has been switched off or the

area is known to be non-hazardous.

Horizontal Mounting

Inhaltsverzeichnis

Andere Delta Stromversorgung Handbücher

Delta

Delta PMC-24V100W1AB Bedienungsanleitung

Delta

Delta LZ-8P/R19 Bedienungsanleitung

Delta

Delta PMU-27V155WC A Series Bedienungsanleitung

Delta

Delta ZBF-12V/3A Bedienungsanleitung

Delta

Delta PMT-V350W1A Series Bedienungsanleitung

Delta

Delta PMC-12V035W1AA Bedienungsanleitung

Delta

Delta DRP024V240W3BA Kurzanleitung

Delta

Delta PMC-05V015W1A Series Bedienungsanleitung

Delta

Delta CliQ DRP024V060W1AA Bedienungsanleitung

Delta

Delta PM 24V200W1AI Series Bedienungsanleitung

Delta

Delta PMC-12V050W1AA Bedienungsanleitung

Delta

Delta CliQ II DRP024V060W1N Series Bedienungsanleitung

Delta

Delta PMC-24V300W1BA Bedienungsanleitung

Delta

Delta GPS-850HB A A22 Bedienungsanleitung

Delta

Delta DRS-24V30W1NZ Bedienungsanleitung

Delta

Delta DRS-24V100W1A Series Bedienungsanleitung

Delta

Delta GPS-550LB E A22 Bedienungsanleitung

Delta

Delta PMT2 75 W Series Bedienungsanleitung

Delta

Delta PJH Series Bedienungsanleitung

Delta

Delta PMC-05V050W1AA Bedienungsanleitung

Delta

Delta PMC-24V035W1AA Bedienungsanleitung

Delta

Delta DRP-24V240W2BN Bedienungsanleitung

Delta

Delta PCM-48V600W1B Series Bedienungsanleitung

Delta

Delta PMC-05V035W1AA Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung