Delta DRP024V060W1AZ Bedienungsanleitung

TECHNICAL DATASHEET

CliQ DIN Rail Power

Supply

24 V 60 W 1

Phase

/ DRP024V060W1AZ

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (September 2021, Rev. 10)

Highlights & Features

•Universal AC input voltage range

•Power will not de-rate for the entire input voltage range

•Power Boost of 150% for 3 seconds

•Rugged and compact design (Vibration 5 G, Shock 30 G)

•Conforms to harmonics current IEC/EN 61000-3-2, Class A

•Wide operating temperature range -20°C to 80°C

•Overvoltage / Overcurrent / Over Temperature / Short Circuit

Protections

•Certified according to IEC/EN/UL 62368-1

Safety Standards

CB Certified for worldwide use

Model Number: DRP024V060W1AZ

Unit Weight:0.33 kg (0.73 lb)

Dimensions (L x W x D): 120.6 x 32 x 113 mm

(4.75 x 1.26 x 4.45 inch)

General Description

The DRP024V060W1AZ is part of the CliQ DIN rail power supply series from one of the world’s leading power supply companies, Delta

Electronics Group, offers state-of-the-art designs made to withstand harsh industrial environments. Its rugged plastic casing has a

compact body at only 32 mm, which is both shock and vibration resistant according to IEC 60068-2 standard. The DRP024V060W1AZ

operates within a wide temperature range from -20°C to +80°C and universal AC input voltage range from 85 Vac to 264 Vac, the power

will not de-rate for the entire input voltage range value. The single phase power supply unit includes overvoltage, overcurrent, over

temperature and short circuit protections. The feature built-in Power Boost of 150% for 3 seconds enables reserve power to be always

available for reliable startup of loads with high inrush current, thus eliminating the need of a more expensive power supply unit at higher

power rating.

Model Information

CliQ DIN Rail Power Supply

Model

Number

Input Voltage Range

Rated Output

oltage

Rated Output Curr

ent

DRP024V060W1AZ 85-264 Vac (120-375 Vdc) 24 Vdc 2.50 A

Model Numbering

DR P024V060W 1AZ

DIN Rail Power Supply Output Voltage Output Power Single Phase CliQ Series Plastic Case

TECHNICAL DATASHEET

CliQ DIN Rail Power

Supply

24 V 60 W 1

Phase

/ DRP024V060W1AZ

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (September 2021, Rev. 10)

Specifications

Input Ratings / Characteristics

Nominal Input Voltage 100-240 Vac

Input Voltage Range 85-264 Vac

Nominal Input Frequency 50-60 Hz

Input Frequency Range 47-63 Hz

DC Input Voltage Range* 120-375 Vdc

Input Current < 1.10 A @ 115 Vac, < 0.70 A @ 230 Vac

Efficiency at 100% Load > 86.0% @ 115 Vac, > 87.0% @ 230 Vac

Max Power Dissipation 0% load < 0.6 W @ 115 Vac & < 1.2 W @ 230 Vac

100% load < 10 W @ 115 Vac & 230 Vac

Max Inrush Current (Cold Start) < 40 A @ 115 Vac, < 80 A @ 230 Vac

Leakage Current < 1 mA @ 240 Vac

*Safety approval according to IEC/EN/UL 60950-1 and IEC/EN/UL 62368-1.

Output Ratings / Characteristics**

Nominal Output Voltage 24 Vdc

Factory Set Point Tolerance 24 Vdc ± 2%

Output Voltage Adjustment Range 22-28 Vdc

Output Current 2.50 A (continuously operating at 24 V)

3.75 A (Power Boost for 3 seconds at 24 V, refer to the details

in the Functions section)

Output Power 60 W (continuously operating at 24 V)

90 W (Power Boost for 3 seconds at 24 V

, refer to the details in

the Functions section)

Line Regulation < 0.5% (@ 85-264 Vac input, 100% load)

Load Regulation < 1.0% (@ 85-264 Vac input, 0-100% load)

PARD*** (20 MHz) < 240 mVpp

Rise Time

< 100 ms @ nominal input (100% load)

Start-up Time < 2,500 ms @ nominal input (100% load)

Hold-up Time > 20 ms @ 115 Vac (100% load)

> 125 ms @ 230 Vac (100% load)

Dynamic Response

(Overshoot & Undershoot O/P Voltage)

± 5% @ 85-264 Vac input, 10-90% load

(Slew Rate: 0.1 A/μs, 50% duty cycle @ 5 Hz to 1 KHz)

Start-up with Capacitive Loads 8,000 µF Max

**For power de-rating from 50°C to 80°C, see power de-rating on page 3.

***PARD is measured with an AC coupling mode, 5 cm wires, and in parallel with 0.1 μF ceramic capacitor.

TECHNICAL DATASHEET

CliQ DIN Rail Power

Supply

24 V 60 W 1

Phase

/ DRP024V060W1AZ

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (September 2021, Rev. 10)

Mechanical

Case Cover / Chassis

Plastic

Dimensions (L x W x D) 120.6 x 32 x 113 mm (4.75 x 1.26 x 4.45 inch)

Unit Weight 0.33 kg (0.73 lb)

Indicator Green LED DC OK

Cooling System Convection

Terminal Input 3 Pins (Rated 300 V/20 A)

Output 2 Pins (Rated 300 V/20 A)

Wire AWG 20-14

Mounting Rail Standard TS35 DIN Rail in accordance with EN 60715

Noise (1 Meter from power supply) Sound Pressure Level (SPL) < 40 dBA

Environment

Surrounding Air Temperature Operating -20°C to +80°C

Storage -25°C to +85°C

Power De-rating Vertical Mounting -10°C to -20°C output power is 80% of rated power,

< 0°C de-rate power by 2% / °C,

> 50°C de-rate power by 2.5% / °C

Horizontal Mounting -10°C to -20°C output power is 80% of rated power,

< 0°C de-rate power by 2% / °C,

> 50°C de-rate power by 2.5% / °C,

> 70°C de-rate power by 4% / °C

Operating Humidity 5 to 95% RH (Non-Condensing)

Operating Altitude 0 to 2,000 Meters (6,560 ft)

Shock Test Non-Operating IEC 60068-2-27, 30 G (300 m/S²) for a duration of 18 ms,

1 time per direction, 6 times in total

Vibration Non-Operating IEC 60068-2-6, 10 Hz to 150 Hz @ 50 m/S² (5 G peak);

90 min per axis for all X, Y, Z direction

Over Voltage Category III According to IEC/EN 62477-1 / EN 60204-1

(clearance and creepage distances) and

IEC 62103 (safety part)

Pollution Degree 2

Protections

Overvoltage < 32 V, ±10%, SELV Output, Hiccup Mode,

Non-Latching (Auto-Recovery)

Overload / Overcurrent > 150% of rated load current, Hiccup Mode,

Non-Latching (Auto-Recovery)

Over Temperature < 80°C Surrounding Air Temperature @ 100% load,

Non-Latching (Auto-Recovery)

Short Circuit Hiccup Mode, Non-Latching

(Auto-Recovery when the fault is removed)

Internal Fuse at L pin T3.15AH

Protection Against Shock Class I with PE* connection

*PE: Primary Earth

TECHNICAL DATASHEET

CliQ DIN Rail Power

Supply

24 V 60 W 1

Phase

/ DRP024V060W1AZ

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (September 2021, Rev. 10)

Reliability Data

MTBF > 500,000 hrs. as per Telcordia SR-332

I/P: 115Vac, O/P: 100% load, Ta: 25°C

Expected Cap Life Time

10 years (115 Vac & 230 Vac, 50% load @ 40°C)

Safety Standards / Directives

Electrical Equipment of Machines

EN 60204-1 (over voltage category III)

Electrical Equipment for Use in Electrical Power Installations

IEC/EN/BS EN 62477-1 / IEC 62103

Safety Entry Low Voltage

SELV (IEC 60950-1)

Electrical Safety SIQ Bauart EN 62368-1

UL/cUL recognized UL 60950-1 and CSA C22.2 No. 60950-1 (File No. E191395),

UL 62368-1 and CSA C22.2 No. 62368-1 (File No. E191395)

cCSAus

CSA C22.2 No. 60950-1 and UL 60950-1 (File No. 181564)

CB Scheme

IEC 60950-1, IEC 62368-1

BIS

IS 13252-1

UKCA

BS EN 62368-1

Industrial Control Equipment

UL/cUL listed

UL 508 and CSA C22.2 No. 107.1-01 (File No. E315355)

cCSAus

CSA C22.2 No. 107.1-01 (File No. 181564)

CE In conformance with EMC Directive 2014/30/EU and

Low Voltage Directive 2014/35/EU

UKCA In conformance with Electrical Equipment

(Safety) Regulations

2016 No. 1011 and

The Electromagnetic Compatibility Regulations 2016 No. 1091

Galvanic Isolation Input to Output 4.0 KVac

Input to Ground

1.5 KVac

Output to Ground

1.5 KVac

TECHNICAL DATASHEET

CliQ DIN Rail Power

Supply

24 V 60 W 1

Phase

/ DRP024V060W1AZ

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (September 2021, Rev. 10)

EMC

Emissions (CE & RE) Generic Standards: CISPR 32, KN 32, EN/BS EN 55032,

CISPR 11, EN/BS EN 55011, FCC Title 47: Class B

Immunity Generic Standards: EN/BS EN 55024, KN 35,

EN/BS EN 61000-6-1

Electrostatic Discharge IEC 61000-4-2 Level 4 Criteria A1)

Air Discharge: 15 kV

Contact Discharge: 8 kV

Radiated Field IEC 61000-4-3 Level 2 Criteria A1)

80 MHz-1GHz, 3 V/M, 80% modulation (1kHz)

Electrical Fast Transient / Burst IEC 61000-4-4 Level 3 Criteria A1)

2 kV

Surge IEC 61000-4-5 Level 3 Criteria A1)

Common Mode2): 2 kV

Differential Mode

: 2 kV

Conducted IEC 61000-4-6 Level 2 Criteria A1)

150 kHz-80 MHz, 3 Vrms

Power Frequency Magnetic Fields IEC 61000-4-8 Criteria A1)

1 A/Meter

Voltage Dips and Interruptions

IEC 61000-4-11

100% dip; 1 cycle (20ms); Self Recoverable

Low Energy Pulse Test (Ring Wave) IEC 61000-4-12 Level 3 Criteria A1)

Common Mode2): 2 kV

Differential Mode

: 1 kV

Voltage Fluctuation and Flicker

IEC/EN/BS EN 61000-3-3

1) Criteria A: Normal performance within the specification limits

2) Asymmetrical: Common mode (Line to earth)

3) Symmetrical: Differential mode (Line to line)

TECHNICAL DATASHEET

CliQ DIN Rail Power

Supply

24 V 60 W 1

Phase

/ DRP024V060W1AZ

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (September 2021, Rev. 10)

Block Diagram

Device Description

1) Input terminal block connector

2) Output terminal block connector

3) DC Voltage adjustment potentiometer

4) DC OK control LED (Green)

5) Universal mounting rail system

TECHNICAL DATASHEET

CliQ DIN Rail Power

Supply

24 V 60 W 1

Phase

/ DRP024V060W1AZ

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (September 2021, Rev. 10)

Dimensions

L x W x D: 120.6 x 32 x 113 mm (4.75 x 1.26 x 4.45 inch)

Engineering Data

Output Load De-rating VS Surrounding Air Temperature

Note

1. Power supply components may degrade, or

be damaged, when the power supply is

continuously used outside the shaded region,

refer to the graph shown in Fig. 1.

2. If the output capacity is not reduced when the

surrounding air temperature exceeds its

specification as defined on Page 3 under

“Environment”, the device may run into Over

Temperature Protection. When activated, the

output voltage will go into bouncing mode and

will recover when the surrounding air

temperature is lowered or the load is reduced

as far as necessary to keep the device in

working condition.

3. In order for the device to function in the

manner intended, it is also necessary to keep

a safety distance as recommended in the

safety instructions while the device is in

operation.

4. Depending on the surrounding air temperature

and output load

delivered by the power

supply, the device can be very hot!

5. If the device has to be mounted in any other

orientation, please contact info@deltapsu.com

for more details.

Fig. 1 De-rating for Vertical Mounting Orientation

-10°C to -20°C output power is 80% of rated power,

< 0°C de-rate power by 2% / °C,

> 50°C de-rate power by 2.5% / °C

De-rating for Horizontal Mounting Orientation

-10°C to -20°C output power is 80% of rated power,

< 0°C de-rate power by 2% / °C,

> 50°C de-rate power by 2.5% / °C,

> 70°C de-rate power by 4% / °C

TECHNICAL DATASHEET

CliQ DIN Rail Power

Supply

24 V 60 W 1

Phase

/ DRP024V060W1AZ

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (September 2021, Rev. 10)

Output Load De-rating VS Input Voltage

Assembly & Installation

The power supply unit (PSU) can be mounted on 35 mm DIN rails in accordance with EN 60715. The device should be installed with

input terminal block at the bottom.

Each device is delivered ready to install.

Mounting

In accordance to EN 60950 / UL 60950 and EN 62368 / UL 62368, flexible cables require ferrules.

Use appropriate copper cables designed to sustain operating temperature of at least 75°C or more to fulfill UL requirements.

Dismounting

Fig. 2.1 Mounting

Snap on the DIN rail as shown in Fig. 2.1:

1. Tilt the unit upwards and insert it onto the DIN rail.

2. Push downwards until stopped.

3. Press against the bottom front side for locking.

4. Shake the unit slightly to ensure that it is secured.

Fig. 2.2 Dismounting

To uninstall, pull or slide down the latch with screw driver as

shown in Fig. 2.2. Then slide the power supply unit (PSU) in the

opposite direction, release the latch and pull out the power

supply unit (PSU) from the rail.

No output power de-rating across the entire

input voltage range

TECHNICAL DATASHEET

CliQ DIN Rail Power

Supply

24 V 60 W 1

Phase

/ DRP024V060W1AZ

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (September 2021, Rev. 10)

Safety Instructions

Vertical Mounting

•ALWAYS switch mains of input power OFF before connecting and disconnecting the input voltage to the unit. If mains are not turned

OFF, there is risk of explosion / severe damage.

•To guarantee sufficient convection cooling, please refer to the following instructions to ensure sufficient clearance around

the device.

Vertical Mounting: 50 mm (1.97 inch) above and below the device as well as a lateral distance of 20 mm (0.79 inch) to other

units.

Horizontal Mounting: 50 mm (1.97 inch) above and below the device as well as a lateral distance of 50 mm (1.97 inch) to

other units.

•Note that the enclosure of the device can become very hot depending on the surrounding air temperature and load of the power

supply. Risk of burns!

•Only plug in and unplug connectors when power is turned off!

•DO NOT insert any objects into the unit.

•Hazardous voltages may be present for up to 5 minutes after the input mains voltage is disconnected. Do not touch the unit during

this time.

Horizontal Mounting

TECHNICAL DATASHEET

CliQ DIN Rail Power

Supply

24 V 60 W 1

Phase

/ DRP024V060W1AZ

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (September 2021, Rev. 10)

Functions

Graph illustrating the Start-up Time, Rise Time, and Hold-up Time

Start-up Time

The time required for the output voltage to reach 90% of its final steady state set value, after the input voltage is applied.

Rise Time

The time required for the output voltage to change from 10% to 90% of its final steady state set value.

Hold-up Time

Time between the collapse of the AC input voltage, and the output falling to 95% of its steady state set value.

Inrush Current

Inrush current is the peak, instantaneous, input current measured

and, occurs when the input voltage is first applied. For AC input

voltages, the maximum peak value of inrush current will occur

during the first half cycle of the applied AC voltage. This peak value

decreases exponentially during subsequent cycles of AC voltage.

Dynamic Response

The power supply output voltage will remains within ±5% of its

steady state value, when subjected to a dynamic load from 10% to

90% of its rated current.

50% duty cycle / 5 Hz to 1 KHz

Inhaltsverzeichnis

Andere Delta Stromversorgung Handbücher

Delta

Delta PMT-36V350W1A Series Bedienungsanleitung

Delta

Delta GPS-550LB E A22 Bedienungsanleitung

Delta

Delta PMR-V320WD Series Bedienungsanleitung

Delta

Delta sync 24V 100W Series Bedienungsanleitung

Delta

Delta A9000 Bedienungsanleitung

Delta

Delta LZ-16/POL/R19 Bedienungsanleitung

Delta

Delta PMC-24V300W1BA Bedienungsanleitung

Delta

Delta CliQ II DRP024V060W1B Bedienungsanleitung

Delta

Delta LYTE II Bedienungsanleitung

Delta

Delta PMC-24V600W1RW Bedienungsanleitung

Delta

Delta Platinum GPS-650LB A A22 Bedienungsanleitung

Delta

Delta PMT2 75 W Series Bedienungsanleitung

Delta

Delta PMU-27V155WC A Series Bedienungsanleitung

Delta

Delta PMU-27V155WC A Series Bedienungsanleitung

Delta

Delta PMC-24V035W1AA Bedienungsanleitung

Delta

Delta HDS 3000 Bedienungsanleitung

Delta

Delta PMT-24V350W1AK Bedienungsanleitung

Delta

Delta LYTE DRL-24V240W1A Series Bedienungsanleitung

Delta

Delta CliQ DRP024V120W1AA Kurzanleitung

Delta

Delta PMC-24V035W1AA Bedienungsanleitung

Delta

Delta HPH-20KA01KAT Bedienungsanleitung

Delta

Delta CliQ DRP024V060W1AA Bedienungsanleitung

Delta

Delta DRP048V060W1B Series Bedienungsanleitung

Delta

Delta PMC-05V015W1A Series Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung