Delta Ultron Series Bedienungsanleitung

Delta UPS - Ultron Family

The power behind competitiveness

www.deltapowersolutions.com

DPS Series, Three Phase

300-600 kVA

User Manual

EMERGENCY

POWER OFF

Don'toperateunlessin

emergency!

Ultron DPS Series 2

SAVE THIS MANUAL

This manual contains important instructions and warnings that you should follow during

the installation, operation, storage and maintenance of this product. Failure to heed these

instructions and warnings will void the warranty.

(“Manual”), including but not limited to the contents, information, and figures are solely

owned and reserved by Delta Electronics Inc. (“Delta”). The Manual can only be applied to

the operation or the use of this product. Any disposition, duplication, dissemination,

reproduction, modification, translation, extraction, or usage of this Manual in whole or in part

is prohibited without the prior written permission of Delta. Given that Delta will continuously

improve and develop the product, changes may be made to the information in this Manual

at any time without obligation to notify any person of such revision or changes. Delta will

make all possible efforts to secure the accuracy and the integrity of this Manual. Delta

disclaims any kinds or forms of warranty, guarantee, or undertaking, either expressly or

implicitly, including but not limited to the completeness, faultlessness, accuracy, non-

infringement, merchantability or fitness for a particular purpose of the Manual.

Table of Content

Chapter 1 : Important Safety Instructions ..............................................................................7

1.1Installation Warnings...........................................................................7

1.2Connection Warnings..........................................................................7

1.3Usage Warnings..................................................................................9

1.4Storage Warnings .............................................................................10

1.5Standard Compliance .......................................................................10

Chapter 2 : Introduction ....................................................................................................... 11

2.1General Overview ............................................................................. 11

2.2Inspection.......................................................................................... 11

2.3Functions & Features........................................................................14

2.4Exterior & Dimensions ......................................................................16

2.5 Front View.........................................................................................17

2.6Internal View .....................................................................................19

2.7 Tri-color LED Indicator & Buzzer ......................................................25

Chapter 3 : Operation Modes ..............................................................................................28

3.1On-Line Mode ...................................................................................28

3.2Battery Mode.....................................................................................29

3.3Bypass Mode ....................................................................................29

3.4Manual Bypass Mode .......................................................................30

3.5ECO Mode ........................................................................................30

3.6Frequency Conversion Mode............................................................31

Chapter 4 : Communication Interfaces ................................................................................32

4.1Communication Interfaces I: on the Front of the UPS

with the Front Door Open ..................................................................32

4.1.1Display Port.......................................................................................33

4.1.2REPO Dry Contacts ..........................................................................33

4.1.3External Battery Temperature Dry Contacts .....................................39

4.1.4External Switch/ Breaker Status Dry Contacts .................................39

4.1.5Output Dry Contacts .........................................................................40

4.1.6Input Dry Contacts ............................................................................42

4.1.7Parallel Communication Cards .........................................................44

Ultron DPS Series 4

4.1.8Parallel Ports.....................................................................................45

4.1.9SMART Slot ......................................................................................45

4.1.10USB Port & RS-232 Port...................................................................46

4.1.11Auxiliary Power Cards.......................................................................46

4.1.12Battery Start Buttons.........................................................................47

4.2Communication Interfaces II: at the Rear of the Touch Panel ..........48

Chapter 5 : Installation and Wiring ......................................................................................53

5.1Before Installation and Wiring...........................................................53

5.2Installation Environment....................................................................53

5.3Fixing the UPS ..................................................................................56

5.4Wiring................................................................................................59

5.4.1Pre-wiring Warnings..........................................................................59

5.4.2Single Input to Dual Input Modification .............................................62

5.4.3Installation of Insulating Plates for Top & Bottom Wiring ..................65

5.4.4 Single Unit Wiring .............................................................................67

5.4.5 Parallel Units Wiring..........................................................................82

5.5External Battery Cabinet Connection Warnings ...............................89

5.6Installation of Rodent Shields ...........................................................97

5.6.1Installation of 300kVA UPS’s Rodent Shields ...................................97

5.6.2Installation of 400/ 500/ 600kVA UPS’s Rodent Shields...................99

Chapter 6 : UPS Operation................................................................................................101

6.1Pre Start-up & Pre Turn-off Warnings .............................................101

6.2Start-up Procedures........................................................................102

6.2.1On-Line Mode Start-up Procedures................................................102

6.2.2Battery Mode Start-up Procedures .................................................103

6.2.3Bypass Mode Start-up Procedures.................................................104

6.2.4Manual Bypass Mode Start-up Procedures....................................105

6.2.5ECO Mode Start-up Procedures.....................................................107

6.2.6Frequency Conversion Mode Start-up Procedures ........................109

6.3Turn-off Procedures ........................................................................ 111

6.3.1On-Line Mode Turn-off Procedures ................................................ 111

6.3.2Battery Mode Turn-off Procedures.................................................. 111

6.3.3Bypass Mode Turn-off Procedures ................................................. 112

6.3.4Manual Bypass Mode Turn-off Procedures .................................... 112

6.3.5ECO Mode Turn-off Procedures ..................................................... 112

6.3.6Frequency Conversion Mode Turn-off Procedures......................... 113

6.4Start-up & Turn off Procedures for Parallel Units............................ 113

Chapter 7 : LCD Display & Settings .................................................................................. 115

7.1LCD Display Hierarchy.................................................................... 115

7.2How to Turn on the LCD ................................................................. 118

7.3Introduction of Touch Panel and Function Keys ............................. 119

7.4 Password Entry...............................................................................125

7.5Check Kilowatt-Hour .......................................................................125

7.6UPS Settings...................................................................................127

7.6.1Bypass Setting ................................................................................127

7.6.2Mode Setting...................................................................................127

7.6.3Output Setting .................................................................................128

7.6.4Battery & Charging Setting .............................................................129

7.6.5Parallel Setting................................................................................131

7.6.6Dry Contact Setting.........................................................................131

7.6.7General Setting ...............................................................................133

7.6.8IP Setting.........................................................................................134

7.6.9Control.............................................................................................134

7.7 System Maintenance ......................................................................135

7.7.1Warning...........................................................................................135

7.7.2Historical Event ...............................................................................135

7.7.3Statistics..........................................................................................136

7.7.4Test..................................................................................................136

7.7.5Clear................................................................................................136

7.7.6Advanced Diagnosis .......................................................................137

7.7.7Version & S/N..................................................................................137

Chapter 8 : Optional Accessories ......................................................................................138

8.1EMS Function on the LCD Screen..................................................140

8.2BMS Function on the LCD Screen..................................................144

8.3MFC Function on the LCD Screen..................................................146

Ultron DPS Series 6

Chapter 9 : Maintenance ...................................................................................................148

Appendix 1 : Technical Specifications ...............................................................................149

Appendix 2 : Warranty .......................................................................................................152

Chapter 1 : Important Safety Instructions

1.1 Installation Warnings

•This is a three-phase four-wire on-line uninterruptible power supply (hereafter referred

to as 'UPS'). It can be used for commercial and industrial applications.

•Install the UPS in a well-ventilated indoor area, away from excess moisture, heat, dust,

flammable gas or explosives.

•Leave adequate space around all sides of the UPS for proper ventilation and

maintenance. Please refer to 5.2 Installation Environment.

•Only authorized Delta engineers or service personnel can perform installation and

maintenance. If you want to install the UPS by yourself, please install it under the

supervision of authorized Delta engineers or service personnel.

•Follow the IEC 60364-4-42 standard to install the UPS.

1.2 Connection Warnings

•Before applying electrical power to the UPS, make sure the UPS is grounded to avoid a

possible risk of current leakage.

•You can parallel up to eight UPS units.

•The UPS must be connected with an external battery cabinet (user-supplied, handled

and configured by Delta service personnel). Please refer to 5.5 External Battery

Cabinet Connection Warnings for relevant information.

•It is necessary to connect the protective devices with the UPS when the UPS is

connected to power sources and critical loads.

•The protective devices connected to the UPS must be installed near the UPS and easily

accessible for operation.

•Protective Devices:

1. For single input, please install (1) a protective device between the main AC source

and the UPS and (2) a protective device between the connected critical loads and

the UPS.

2. For dual input, please install (1) a protective device between the main AC source

and the UPS, (2) a protective device between the bypass source and the UPS and

(3) a protective device between the connected critical loads and the UPS.

3. Each protective device could be (1) a breaker, (2) a switch connected in series with

fuses, or (3) a switch*1. For the protective device’s rated current, please refer to the

table below.

Ultron DPS Series 8

NOTE:

*1Only applicable when the UPS has the corresponding built-in fuses, and the

configurations of the UPS’s built-in fuses must meet the protective device’s

requirement No.7 below.

300kVA 400kVA 500kVA 600kVA

800A 1000A 1250A 1500A

4. Each protective device should have the functions of overcurrent protection, short circuit

protection, insulating protection and shunt trip feature. Please refer to the table below

for the UPS cut-off current (Icc).

300kVA 400kVA 500kVA 600kVA

10kA 12.12kA 15.16kA 18.18kA

5. When selecting the protective devices, please take each power cable’s current capacity

and the system’s overload capacity (please refer to Appendix 1: Technical

Specifications) into consideration. Besides, the short-circuit capacity of the upstream

protective devices must be equal to or larger than the capacity of the UPS’s input

protective devices.

6. When the UPS has abnormalities and the input short-circuit current reaches 20kA, the

UPS’s internal semi-conductor fast-acting fuses need 8 ~ 10ms to be blown. Thus, the

upstream protective devices’ reaction time should be more than 10ms so that the UPS’s

semi-conductor fast-acting fuses would have sufficient time to block the system

breakdown and let the UPS transfer to Bypass mode.

7. If the UPS is supplied by a power source whose neutral is grounded, each protective

device must be a 3-pole type. If the UPS is supplied by a power source whose neutral is

not grounded, each protective device must be a 4-pole type.

8. The recommended electrical rating of the backfeed protective device is as follows.

300kVA 400kVA 500kVA 600kVA

690V/ 630A 690V/ 800A 690V/ 1000A 690V/ 1250A

1.3 Usage Warnings

•Before installation, wiring and working on the UPS’s internal circuits, please completely

cut off all power supplying to the UPS, including the input power and battery power.

•The UPS is specifically designed for information technology equipment and used to

power computers, servers, and associated peripheral devices. If you want to connect

any capacitive loads or non-linear loads (that have serious surge current) to the UPS, it

needs to be de-rated according to on-site applications. For such special applications,

please contact Delta service personnel for the accurate UPS sizing. The UPS is not

suitable for connecting with any asymmetrical loads (e.g. half-bridge motor drivers).

•The external slits and openings in the UPS are provided for ventilation. To ensure reliable

operation of the UPS and to protect the UPS from overheating, these slits and openings

must not be blocked or covered. Do not insert any object into the slits and openings that

may hinder ventilation.

•Before applying electrical power to the UPS, you must allow the UPS to adjust to room

temperature (20°C ~ 25°C (68°F ~ 77°F)) for at least one hour to avoid moisture

condensing inside the UPS.

•Do not put beverages on the UPS, external battery cabinet(s) or any other accessory

associated with the UPS.

•Do not open or remove the covers or panels of the UPS to avoid high-voltage electric

shock. Only authorized Delta engineers or service personnel can do so for installation

or maintenance. If you want to open or remove the covers or panels, do it only under the

supervision of authorized Delta engineers or service personnel.

•It is strictly forbidden to connect the UPS to any regenerative loads (e.g. CNC machines

and lifts).

•The risk of dangerous high voltage is possible when batteries are still connected to the

UPS even if the UPS is disconnected from the power sources. Before maintenance of

the UPS, turn off each external battery cabinet’s circuit breaker to completely cut off the

battery power from the UPS.

•Do not dispose of the battery or batteries in a fire. The batteries may explode.

•Do not open or damage the battery or batteries. The released electrolyte is harmful to

the skin and eyes and may be toxic.

•The UPS is electronic equipment that runs 24 hours continuously. To ensure its normal

lifetime, regular maintenance of the UPS and batteries is of vital importance and

necessary.

•Some components like batteries, power capacitors, and fans will become worn-out due

to long-term usage, and this will increase the risk of UPS failure. To replace and maintain

the components, please contact Delta service personnel.

Ultron DPS Series 10

•A battery can present a risk of electric shock and high short-circuit current. The following

precautions should be observed before replacement of batteries:

1. Remove watches, rings, or other metal objects.

2. Use tools with insulating handles.

3. Wear insulating gloves and boots.

4. Do not lay tools or metal parts on the top of batteries.

5. Disconnect the charging source prior to connecting or disconnecting the battery

terminals.

•You must contact Delta customer service if any of the following events occurs:

1. Any liquid is poured or splashed on the UPS.

2. The UPS is deformed.

3. Any conductive powders or metals enter into the UPS.

4. The UPS does not run normally after you carefully followed the instructions in this

User Manual.

1.4 Storage Warnings

•Use the original packing materials to pack the UPS to prevent any possible damage from

rodents.

•If the UPS needs to be stored prior to installation, it should be placed in a dry indoor

area. The allowable storage temperature is below 70°C (158°F) and relative humidity is

below 95%.

1.5 Standard Compliance

•EN 62040-1

•EN 62040-2 Category C3

•EN 61000-4-2 Level 4

•EN 61000-4-3 Level 3

•EN 61000-4-6

•EN 61000-4-4 Level 4

•EN 61000-4-5 Level 4

•YD 5083-2005

•YD/ T 5096-2016

•NEBS GR-63-CORE Zone 4 Earthquake Level Qualification

Andere Handbücher für Ultron Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Delta UPS Handbücher

Delta

Delta UPS602N2004N035 Bedienungsanleitung

Delta

Delta Ultron HPH series Bedienungsanleitung

Delta

Delta UPS102R2000B0B1 Original Betriebsanleitung

Delta

Delta RT Series Bedienungsanleitung

Delta

Delta Amplon MX Series Bedienungsanleitung

Delta

Delta Amplon Series Bedienungsanleitung

Delta

Delta Amplon Series Bedienungsanleitung

Delta

Delta Amplon RT Series Bedienungsanleitung

Delta

Delta Ultron GES203HH33A035 Bedienungsanleitung

Delta

Delta DPS Series Bedienungsanleitung

Delta

Delta Amplon Series Bedienungsanleitung

Delta

Delta Amplon RT 5kVA Bedienungsanleitung

Delta

Delta Amplon RT Series Bedienungsanleitung

Delta

Delta Amplon RT Series Bedienungsanleitung

Delta

Delta 3KVA Bedienungsanleitung

Delta

Delta NH Plus series Bedienungsanleitung

Delta

Delta UPS V3 Bedienungsanleitung

Delta

Delta Amplon RT Series Bedienungsanleitung

Delta

Delta VX 600VA Original Betriebsanleitung

Delta

Delta UPS103N2004N0B0 Original Betriebsanleitung

Delta

Delta DPH series Bedienungsanleitung

Delta

Delta Amplon RT5K Bedienungsanleitung

Delta

Delta Ultron DPS-400K Bedienungsanleitung

Delta

Delta Agilon VX Series Benutzerhandbuch

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung