Denali T3 Bedienungsanleitung

Instruction Rev00

0mm 10 20 30 40 50 60 70 80 90

Thank you for choosing DENALI

We know you would rather be riding your bike than wrenching on it, so we go the extra

mile to make sure our instructions are clear and as easy to understand as possible. If

you have any questions, comments, or suggestions don’t hesitate to give our gear

experts a call at 401.360.2550 or visit WWW.DENALIELECTRONICS.COM

Please Read Before Installing

DENALI products should always be installed by a qualified motorcycle technician. If

you are unsure of your ability to properly install a product, please have the product

installed by your local motorcycle dealer. DENALI takes no responsibility for damages

caused by improper installation. Caution: When installing electronics it is extremely

important to pay close attention to how wires are routed, especially when mounting

products to the front fender, front forks, or fairing of your motorcycle. Always be sure

to turn the handlebars fully left, fully right, and fully compress the suspension to

ensure the wires will not bind and have enough slack for your motorcycle to operate

properly.

Installation Tips

We strongly recommend using medium strength liquid thread locker on all screws,

nuts, and bolts. It is also important to ensure that all hardware is tightened to the

proper torque specifications as listed in your owner’s manual. For included accessory

hardware please refer to the default torque specifications provided below. Inspect all

hardware after the first 30 miles to ensure proper torque specifications are

maintained.

Hardware Sizing Guide

Not sure what size bolt you have? Use this ruler to measure screws, bolts, spacers, etc.

Remember, the length of a screw or bolt is measured from the start of the “mounting

surface” to the end of the screw, so only include the screw head when measuring

countersunk screws.

M3 10.0 in-lbs - 1.0 Nm

M4 23.0 in-lbs - 2.5 Nm

M5 44.5 in-lbs 3.5 ft-lbs 5.0 Nm

M6 78.0 in-lbs 6.5 ft-lbs 9.0 Nm

M8 - 13.5 ft-lbs 18.0 Nm

M10 - 30.0 ft-lbs 41.0 Nm

M12 - 52.0 ft-lbs 71.0 Nm

in-lbs

ft-lbs NmBolt Size

0in 1 2 3

What’s In The Box?

DENALIELECTRONICS.COM

T3 License Plate Mount Kit

LAH.T3.10200

Instruction Manual

(a) Mounting Bracket ................................................................Qty 2

(b) M6x16 ISO 7380.................................................................Qty 4

(d) M3x10 DIN 912...................................................................Qty 4

Kit Contents Tools Required

2.5mm Allen Key, 4mm Allen Key, 10mm Wrench

(b)

(a) (c)

(d)

1. Assembling The License Plate Mounts

2. Installing The License Plate Mounts

1.1 - Assembling The Mount

Step One: Feed the harness through the center of the Mounting Bracket

(a).

Step Two: Use the M3x10 Screws (d) to attach the T3 Light Pod to the

Mounting Bracket (a).

Repeat steps One & Two using the second Mounting Bracket and T3 Pod.

DENALIELECTRONICS.COM

2.1 - Installing To The Plate Holder

Step One: Mount the T3 Light Pods behind the license plate and use the

M6X16 Bolts (b) and Nuts (c) to firmly sandwich the mounts between the

license plate and

M3x10

T3 Light Pod (Sold Separately)

Fender Mounting Bracket

T3 Light Pod w/ Plate Mount

Nut

Bolt

Plate

Plate Holder

Dieses Handbuch passt für folgende Modelle

Andere Denali Motorradzubehör Handbücher

Denali

Denali HMT.07.11000 Bedienungsanleitung

Denali

Denali DNL.WHS.084 Bedienungsanleitung

Denali

Denali SoundBomb TT-SB.10100.B Bedienungsanleitung

Denali

Denali LAH.08.10700 Bedienungsanleitung

Denali

Denali ALG.003 Bedienungsanleitung

Denali

Denali LAH.07.11000 Bedienungsanleitung

Denali

Denali HMT.08.10300 Bedienungsanleitung

Denali

Denali LAH.00.10000.B Bedienungsanleitung

Denali

Denali DialDim Bedienungsanleitung

Denali

Denali DialDim DNL.WHS.22800 Bedienungsanleitung

Denali

Denali CANsmart Controller GEN II Bedienungsanleitung

Denali

Denali LAH.08.10900 Bedienungsanleitung

Denali

Denali LAH.00.11600 Bedienungsanleitung

Denali

Denali LAH.07.11300 Bedienungsanleitung

Denali

Denali MA11729 Bedienungsanleitung

Denali

Denali LAH.23.10100 Bedienungsanleitung

Denali

Denali HMT.22.10100 Bedienungsanleitung

Denali

Denali KLR650 Bedienungsanleitung

Denali

Denali SoundBomb DNL.SB.050 Bedienungsanleitung

Denali

Denali DNL.WHS.24200 Bedienungsanleitung

Denali

Denali B6 Bedienungsanleitung

Denali

Denali DialDim DNL.WHS.23900 Bedienungsanleitung

Denali

Denali LAH.04.10700 Bedienungsanleitung

Denali

Denali MBK.22.10000 Bedienungsanleitung

Beliebte Motorradzubehör Handbücher anderer Marken

SRC

SRC B-TRK502-01-01-SL Bedienungsanleitung

hepco & becker

hepco & becker 6307520 00 01 Bedienungsanleitung

HOMCOM

HOMCOM AA0-077 Bedienungsanleitung

hepco & becker

hepco & becker 6307558 00 01 Bedienungsanleitung

Wunderkind Custom

Wunderkind Custom 106503-F15 Benutzerhandbuch

Dräger

Dräger HPS 3500 Bedienungsanleitung

M-WAVE

M-WAVE SKI Bedienungsanleitung

Kuryakyn

Kuryakyn 6212 Bedienungsanleitung

hepco & becker

hepco & becker 6507504 00 01 Bedienungsanleitung

Tool it

Tool it PROMAX LCD 9.13G Bedienungsanleitung

Custom Dynamics

Custom Dynamics TruWrapz Bedienungsanleitung

Roof

Roof RO200 CARBON Bedienungsanleitung

Kabuto

Kabuto Japan IBUKI Bedienungsanleitung

PUIG

PUIG 5051 Bedienungsanleitung

rizoma

rizoma ZTH050 Bedienungsanleitung

Joubert

Joubert 10001711 Bedienungsanleitung

SW-Motech

SW-Motech SBL.01.971.10000/B Bedienungsanleitung

GÜDE

GÜDE GSH 180-TC-2 Bedienungsanleitung