Denon AVR-X2200W Bedienungsanleitung

Model Information

INTEGRATED NETWORK AV RECEIVER

I/R Codes

Product Specifications

Upgrades/Updates

FAQ’s

Accessories

Reset Procedure

Warranty

Remote Control

Rear Panel

Front Panel

MODEL: AVR-X2200W

MI070115E3-1

NOTE:

This edition is missing the FAQ’s content (pages 16 and 17) ………………………………………………………..7/1/2015

This edition is missing the link to the IR Codes………………………………………………………………………....7/1/2015

Model Information

Index

Power operation button ( )

Used to turn the power of the MAIN ZONE (room where this unit is located)

on/off (standby).

Power indicator

This is lit as follows according to the power status:

White: Power on

Off: Normal standby

Red:

oWhen “HDMI Control” is set to “On”

oWhen “HDMI Pass Through” is set to “On”

oWhen “Network Control” is set to “Always On”

SOURCE SELECT knob

This selects the input source.

Remote control sensor

This receives signals from the remote control unit.

Display

This displays various pieces of information.

MASTER VOLUME knob

This adjusts the volume level.

Tuner preset channel buttons

(TUNER PRESET CH +, –)

These select preset broadcast stations.

ZONE2 ON/OFF button

This turns the power of ZONE2 (separate room) on/off.

ZONE2 SOURCE button

This selects the input source for ZONE2.

DIMMER button

Each press of this switches the brightness of the display.

STATUS button

Each press of this switches the status information that is shown on the

display.

Front Panel (1 of 2)

HOME FRONT PANEL 2DISPLAY 1 2

QUICK SELECT buttons

With a single press of any of these buttons, you can call up various

settings you’ve registered to each button such as the input source,

volume level and sound mode settings.

Headphones jack (PHONES)

This is used to connect headphones.

When the headphones are plugged into this jack, audio will no longer

be output from the connected speakers or from the PRE OUT

connectors.

NOTE:

To prevent hearing loss, do not raise the volume level excessively when

using headphones.

AUX1-HDMI connector

This is used to connect HDMI output compatible devices such as video

camcorders and game consoles.

USB port

This is used to connect USB storages (such as USB memory devices)

and the USB cable supplied with iPod.

SETUP MIC jack

This is used to connect the supplied Sound calibration microphone.

Front Panel (2 of 2)

HOME DISPLAY 1FRONT PANEL 1 3

Input mode indicators

These light according to the audio input mode settings of each input

source.

Surround back indicator

This lights when audio signals are being output from the surround back

speakers.

Decoder indicators

These light when Dolby or DTS signals are input or when the Dolby or

DTS decoder is running.

Audyssey® indicator

This lights when “MultEQ® XT”, “Dynamic EQ” or “Dynamic Volume”

has been set up.

Tuner reception mode indicators

These light up according to the reception conditions when the input

source is set to “Tuner”.

TUNED: Lights up when the broadcast is properly tuned in.

STEREO: Lights up when receiving FM stereo broadcasts.

Sleep timer indicator

This lights when the sleep mode is selected.

Circle indicator

This is displayed when the input source is “Online Music” or “iPod/USB”

when you are playing back music.

Display (1 of 2)

HOME DISPLAY 2FRONT PANEL 2 4

HOME REAR PANEL 1DISPLAY 1

Display (2 of 2)

Volume indicator

MUTE indicator

This blinks while the sound is muted.

Information display

The input source name, sound mode, setting values and other

information are displayed here.

Input signal indicators

The respective indicator will light corresponding to the input signal.

ZONE2 indicator

This lights up when ZONE2 (separate room) power is turned on.

Rod antennas for Bluetooth/wireless LAN

Stand this antenna upright when connecting to a network via wireless

LAN, or when connecting to a handheld device via Bluetooth.

Analog audio connectors (AUDIO)

Used to connect devices equipped with analog audio connectors.

•“Connecting a set-top box (Satellite tuner/cable TV)”

•“Connecting a DVD player or Blu-ray Disc player”

NETWORK connector

Used to connect to a LAN cable when connecting to a wired LAN network.

Video connectors (VIDEO)

Used to connect devices equipped with video connectors.

•“Connecting a set-top box (Satellite tuner/cable TV)”

•“Connecting a DVD player or Blu-ray Disc player”

HOME

DISPLAY 2 REAR PANEL 2

Rear Panel (1 of 3)

The antenna clip can be removed from the rear panel.

A Rotate the antenna clip 90 degrees to the left.

B Pull the antenna clip out towards yourself.

•The antenna clip is needed when transporting this unit.

Keep it in a safe place.

•Attach the antenna clip by following the steps for

removing it in reverse.

Digital audio connectors (DIGITAL AUDIO)

Used to connect devices equipped with digital audio connectors.

•“Connection 2 : TV equipped with an HDMI connector and

incompatible with the ARC (Audio Return Channel)”

•“Connection 3 : TV equipped without an HDMI connector”.

REMOTE CONTROL jacks

Used to connect infrared receivers/transmitters in order to operate this

unit and external devices from a different room.

HOME REAR PANEL 3REAR PANEL 1

Rear Panel (2 of 3)

HDMI connectors

Used to connect devices equipped with HDMI connectors.

•“Connection 1 : TV equipped with an HDMI connector and compatible with the

RC (Audio Return Channel)”

•“Connection 2 : TV equipped with an HDMI connector and incompatible with

the ARC (Audio Return Channel)”

•“Connecting a set-top box (Satellite tuner/cable TV)”

•“Connecting a DVD player or Blu-ray Disc player”

AC inlet (AC IN)

Used to connect the power cord.

RS-232C connector

Used to connect home automation controller devices fitted with RS-232C

connectors. Consult the owner’s manual of the home automation controller for

more information about serial control of this unit.

Perform the operation below beforehand.

ATurn on the power of this unit.

BTurn off the power of this unit from the external controller.

CCheck that the unit is in the standby mode.

FM/AM antenna terminals (ANTENNA)

Used to connect FM antennas and AM loop antennas.

Speaker terminals (SPEAKERS)

Used to connect speakers.

PRE OUT connectors

Used to connect a subwoofer with built-in amplifier or an external power

amplifier.

•“Connecting the subwoofer”

•“Connection 3 : Connection using an external amplifier”

Component video connectors (COMPONENT VIDEO)

Used to connect devices equipped with component video connectors.

•“Connection 3 : TV equipped without an HDMI connector”

•“Connecting a set-top box (Satellite tuner/cable TV)”

•“Connecting a DVD player or Blu-ray Disc player”

NOTE

Do not touch the inner pins of the connectors on the rear panel. Electrostatic

discharge may cause permanent damage to the unit.

HOME REMOTE CONTROL 1REAR PANEL 2

Rear Panel (3 of 3)

ZONE SELECT buttons

These switch the zone (MAIN ZONE, ZONE2) that is operated through

the remote control unit.

•“Playback in ZONE2”

•“Menu operations”

Input source select buttons

These selects the input source.

•“Selecting the input source”

•“Playback in ZONE2”

Channel/page search buttons (CH/PAGE )

These select radio stations registered to presets or switch pages.

MUTE button ()

This mutes the output audio.

•“Turning off the sound temporarily (Muting)”

•“Turning off the sound temporarily (Muting) (ZONE2)”

Information button (INFO)

This displays the status information on the TV screen.

Cursor buttons ()

These select items.

HOME REMOTE CONTROL 2REAR PANEL 3

Remote Control (1 of 3)

BACK button

This returns to the previous screen.

System buttons

These perform playback related operations.

Tuning up / Tuning down buttons (TUNE +, –)

These select either FM broadcast or AM broadcast.

QUICK SELECT buttons (1 –4)

These call up settings registered to each button, such as input source,

volume level and sound mode settings.

SOUND MODE buttons

These select the sound mode.

Remote control signal transmitter

This transmits signals from the remote control unit.

SLEEP button

This sets the sleep timer.

HOME REMOTE CONTROL 3REMOTE CONTROL 1

Remote Control (2 of 3)

Andere Handbücher für AVR-X2200W

Inhaltsverzeichnis

Andere Denon Empfänger Handbücher

Denon

Denon AVR-4520CI Bedienungsanleitung

Denon

Denon AVR-2105 Bedienungsanleitung

Denon

Denon AVR-4520CI Bedienungsanleitung

Denon

Denon DRA-697CI Administratorhandbuch

Denon

Denon AVR-3808CI Gebrauchs- und Pflegehandbuch

Denon

Denon AVR-1513 Bedienungsanleitung

Denon

Denon AVR 4310CI Bedienungsanleitung

Denon

Denon AVR-5805 Bedienungsanleitung

Denon

Denon AVR 688 - AV Receiver Bedienungsanleitung

Denon

Denon AVR-X7200W Bedienungsanleitung

Denon

Denon AVR-2112CI Bedienungsanleitung

Denon

Denon AVR-1913 Bedienungsanleitung

Denon

Denon AVR-3310CI Bedienungsanleitung

Denon

Denon AVR 2308CI - AV Receiver Bedienungsanleitung

Denon

Denon AVR-2105 Bedienungsanleitung

Denon

Denon AVR2310CI - Multi-Zone Home Theater Receiver Abmessungen

Denon

Denon AVR-X3000 Bedienungsanleitung

Denon

Denon AVR-3312CI Bedienungsanleitung

Denon

Denon DN-202WR Bedienungsanleitung

Denon

Denon AVR 4308CI - AV Network Receiver Bedienungsanleitung

Denon

Denon RC-7001RCI - Remote Control RF/IR Base... Bedienungsanleitung

Denon

Denon AVR-1913 Bedienungsanleitung

Denon

Denon AVR 3802 Bedienungsanleitung

Denon

Denon ADV-M71 Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung