Denon AVR-X4100W Bedienungsanleitung

MODEL: AVR-X4100W

Model Information

INTEGRATED NETWORK AV RECEIVER

I/R Codes

Product Specifications

Upgrades/Updates

FAQ’s

Accessories

Reset Procedure

Warranty

Remote Control

Rear Panel

Front Panel

MI070115E3-1

NOTE:

This edition is missing the FAQ’s content (pages 15 and 16) ………………………………………………………..7/1/2015

This edition is missing the link to the IR Codes………………………………………………………………………....7/1/2015

Model Information

Index

Front Panel

Power operation button ( )

Used to turn the power of the MAIN ZONE

(room where this unit is located) on/off

(standby).

Power indicator

This is lit as follows according to the power status:

•White: Power on

•Off: Normal standby

•Red:

•When “HDMI Pass Through” is set to “On”

•When “HDMI Control” is set to “On”

•When “IP Control” is set to “Always On”

SOURCE SELECT knob

This selects the input source.

Remote control sensor

This receives signals from the remote control unit.

Display

This displays various pieces of information.

MASTER VOLUME knob

This adjusts the volume level.

Door

When you are using buttons and/or connectors behind the

door, press the bottom of the door to open it. Be careful not

to catch your fingers when closing the door.

1 2 3 4 56

HOME Buttons and Connectors Behind the

Compartment Door (2 of 2)

Buttons and Connectors Behind the

Compartment Door (1 of 2) 2

Buttons and Connectors Behind the Compartment Door (1 of 2)

ZONE2 ON/OFF button

This turns the power of ZONE2 on/off.

ZONE2 SOURCE button

This selects the input source for ZONE2.

ZONE3 ON/OFF button

This turns the power of ZONE3 on/off.

ZONE3 SOURCE button

This selects the input source for ZONE3.

STATUS button

Each press of this switches the status information that is shown

on the display.

Information button (INFO)

This displays the status information on the TV screen.

Cursor buttons 

These select items.

OPTION button

This displays the option menu on the TV screen.

DIMMER button

Each press of this switches the brightness of the display.

 QUICK SELECT buttons

These call up settings registered to each button, such as input

source, volume level and sound mode settings.

HOME

FRONT PANEL Buttons and Connectors Behind the

Compartment Door (2 of 2) 3

Buttons and Connectors Behind the Compartment Door (2 of 2)

 AUX1 HDMI connector

This is used to connect HDMI output compatible devices such as

video camcorders and game consoles.

 USB port

This is used to connect USB storages (such as USB memory devices)

and the USB cable supplied with iPod.

 Headphones jack (PHONES)

This is used to connect headphones.

When the headphones are plugged into this jack, audio will no longer

be output from the connected speakers or from the PRE OUT

connectors.

NOTE

To prevent hearing loss, do not raise the volume level excessively

when using headphones.

 BACK button

This returns to the previous screen.

 ENTER button

This determines the selection.

 SETUP button

This displays the menu on the TV screen.

 AUX1 INPUT connector

Used to connect analog output compatible devices such as video

camcorders and game consoles.

 SETUP MIC jack

This is used to connect the supplied Sound calibration microphone.

HOME DISPLAY

Buttons and Connectors Behind the

Compartment Door (1 of 2) 4

Display

Input signal indicators

The respective indicator will light corresponding to the input signal.

Decoder indicators

These light when Dolby or DTS signals are input or when the Dolby or DTS

decoder is running.

Audyssey®indicator

This lights when “MultEQ®XT32”, “Dynamic EQ”, “Dynamic Volume”,

“Audyssey DSX®” or “Audyssey LFCTM” is set.

Tuner reception mode indicators

These light up according to the reception conditions when the input source is

set to “HD Radio”.

TUNED: Lights up when the broadcast is properly tuned in.

STEREO: Lights up when receiving FM stereo broadcasts.

Monitor output indicator

These light according to the HDMI monitor output setting. When set to

“Auto(Dual)”, the indicators light according to connection status.

MULTI ZONE indicator

This lights up when ZONE2 or ZONE3 (separate room) power is turned on.

Sleep timer indicator

This lights when the sleep mode is selected.

MUTE indicator

This blinks while the sound is muted. link,

Volume indicator

 Information display

The input source name, sound mode, setting values and

other information are displayed here.

 Front speaker indicator

This lights according to the setting of the front A and B

speakers.

 Input/output signal channel indicators

The channel for input/output signals is displayed according to

the setting configured for “Channel Indicators”.

•When “Channel Indicators” is set to “Output” (Default)

These light when audio signals are being output from the

speakers.

•When “Channel Indicators” is set to “Input” These light

corresponding to the channels that include the input

signals.

When playing HD Audio sources, the EXT indicator lights

when a signal from an extension channel (a channel other

than the front, center, surround, surround back, front height,

front wide or LFE channel) is input.

123456789

  

HOME REAR PANEL 1

Buttons and Connectors Behind the

Compartment Door (2 of 2) 5

Rear Panel (1 of 2)

Bluetooth/wireless LAN antenna connectors

Used to connect the included external antennas for

Bluetooth/wireless connectivity when connecting to a network

via wireless LAN, or when connecting to a handheld device via

Bluetooth.

•Place the external antennas for Bluetooth/wireless

connectivity evenly over the screw terminal of rear.

•Turn clockwise until the antennas is fully connected.

•Rotate the antenna upwards for best reception.

HOME REAR PANEL 2DISPLAY

TRIGGER OUT jacks

Used to connect devices equipped with the trigger function.

Digital audio connectors (DIGITAL AUDIO)

Used to connect devices equipped with digital audio connectors.

RS-232C connector

Used to connect home automation controller devices fitted with

RS-232C connectors. Consult the owner’s manual of the home

automation controller for more information about serial control of this

unit.

REMOTE CONTROL jacks

Used to connect infrared receivers/transmitters in order to operate this

unit and external devices from a different room.

Denon Link HD connector

Used to connect a Denon Link HD compatible Blu-ray Disc player.

SIGNAL GND terminal

Used to connect a ground wire for the turntable.

Rear Panel (2 of 2)

Video connectors (VIDEO)

Used to connect devices equipped with video connectors.

HDMI connectors

Used to connect devices equipped with HDMI connectors.

NETWORK connector

Used to connect to a LAN cable when connecting to a wired LAN

network.

AC inlet (AC IN)

Used to connect the power cord.

FM/AM antenna terminals (ANTENNA)

Used to connect FM antennas and AM loop antennas.

Analog audio connectors (AUDIO)

Used to connect devices equipped with analog audio connectors.

Speaker terminals (SPEAKERS)

Used to connect speakers.

PRE OUT connectors

Used to connect a subwoofer with built-in amplifier or an external power

amplifier.

Component video connectors (COMPONENT VIDEO)

Used to connect devices equipped with component video connectors.

NOTE

Do not touch the inner pins of the connectors on the rear panel.

Electrostatic

discharge may cause permanent damage to the unit.

HOME REMOTE CONTROL 1REAR PANEL 1 7

HOME

Remote Control (1 of 3)

AVR operation buttons (AVR CONTROL MAIN, Z2, Z3)

These switch the zone (MAIN ZONE, ZONE2, ZONE3) that is operated

through the remote control unit.

Operation mode indicators

The “AVR” operation mode indicator lights when the unit is being

operated.

The “DEV.” indicator lights when an external device is being operated.

The “TV” indicator lights when the TV is being operated.

Device operation buttons (DEVICE / DEVICE MENU)

These turn the power of external devices on/off and call up menus.

Preset codes need to be registered in order to use these buttons.

Input source select buttons

These select the input source.

QUICK SELECT buttons (1 –4)

These call up settings registered to each button, such as input source,

volume level and sound mode settings.

 Channel/page search buttons (CH/PAGE )

These select radio stations registered to presets or switch pages.

 MUTE button ( )

This mutes the output audio.

REMOTE CONTROL 2REAR PANEL 2 8

HOME

Remote Control (2 of 3)

Information button (INFO)

This displays the status information on the TV screen.

Cursor buttons ()

These select items.

BACK button

This returns to the previous screen.

System buttons.

These perform playback related operations.

Skip buttons ()

Play button ()

Search buttons ()

Pause button ()

Stop button ()

Tuning up / Tuning down buttons (TUNE +, –).

These select either FM broadcast or AM broadcast.

Number / Character buttons

These enter letters or numbers into the unit.

Remote control signal transmitter

This transmits signals from the remote control unit.

POWER button (O)

This turns the power on/off.

REMOTE CONTROL 3REMOTE CONTROL 1 9

HOME

Remote Control (3 of 3)

TV operation buttons (TV X / TV MENU / TV INPUT)

These turn the TV power on/off, switch the TV input and call up

menus.

Preset codes need to be registered in order to use these buttons.

ECO Mode button ( )

This switches to ECO Mode.

VOLUME buttons ()

These adjust the volume level.

OPTION button

This displays the option menu on the TV screen.

ENTER button

This determines the selection.

 SETUP button

This displays the menu on the TV screen.

 SOUND MODE buttons

These select the sound mode.

•MOVIE button

•MUSIC button

•GAME button

•PURE button

 SLEEP button

This sets the sleep timer.

Warranty 1REMOTE CONTROL 2 10

Andere Handbücher für AVR-X4100W

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Denon Empfänger Handbücher

Denon

Denon AVR-1801 Bedienungsanleitung

Denon

Denon AVR-X2400H Bedienungsanleitung

Denon

Denon AVR-3808CI Bedienungsanleitung

Denon

Denon AVR-588 Administratorhandbuch

Denon

Denon AVR-X3000 Bedienungsanleitung

Denon

Denon AVR-2312CI Bedienungsanleitung

Denon

Denon AVR-X500 Bedienungsanleitung

Denon

Denon AVR-X1100W Bedienungsanleitung

Denon

Denon AVR-3805 Administratorhandbuch

Denon

Denon AVR1910 - Multi-Zone Home Theater Receiver Bedienungsanleitung

Denon

Denon AVR 689 - AV Receiver Abmessungen

Denon

Denon CEOL RCD-N9 Bedienungsanleitung

Denon

Denon AVR-E300 Bedienungsanleitung

Denon

Denon AVR-X6200W Bedienungsanleitung

Denon

Denon AVR-1707 Bedienungsanleitung

Denon

Denon AVR-2807 Bedienungsanleitung

Denon

Denon AVR-S920W Bedienungsanleitung

Denon

Denon AVR 988 - AV Receiver Gebrauchsanweisung

Denon

Denon DN-200WS Bedienungsanleitung

Denon

Denon AVR 988 - AV Receiver Bedienungsanleitung

Denon

Denon AVR-4520CI Bedienungsanleitung

Denon

Denon AVR-S500BT Bedienungsanleitung

Denon

Denon AVR-988 Bedienungsanleitung

Denon

Denon MULTEQXT AVR-4806 Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung