Denon AVR-X7200W Bedienungsanleitung
MODEL: AVR-X7200W
Model Information
INTEGRATED NETWORK AV RECEIVER
MI070115E3-1
I/R Codes
Product Specifications
Upgrades/Updates
FAQ’s
Accessories
Reset Procedure
Warranty
Remote Control
Rear Panel
Front Panel
NOTE:
This edition is missing the FAQ’s content (pages 16 and 17) ………………………………………………………..7/1/2015
This edition is missing the link to the IR Codes………………………………………………………………………....7/1/2015
Model Information
Index
Front Panel
Power operation button ( )
Used to turn the power of the MAIN ZONE
(room where this unit is located) on/off
(standby).
Power indicator
This is lit as follows according to the power status:
•White: Power on
•Off: Normal standby
•Red:
•When “HDMI Pass Through” is set to “On”
•When “HDMI Control” is set to “On”
•When “IP Control” is set to “Always On”
SOURCE SELECT knob
This selects the input source.
Remote control sensor
This receives signals from the remote control unit.
Display
This displays various pieces of information.
MASTER VOLUME knob
This adjusts the volume level.
Door
When you are using buttons and/or connectors behind the
door, press the bottom of the door to open it. Be careful not
to catch your fingers when closing the door.
1 2 3 4 56
7
HOME Buttons and Connectors Behind the
Compartment Door (2 of 2)
Buttons and Connectors Behind the
Compartment Door (1 of 2) 2
Buttons and Connectors Behind the Compartment Door (1 of 2)
ZONE2 ON/OFF button
This turns the power of ZONE2 on/off.
ZONE2 SOURCE button
This selects the input source for ZONE2.
ZONE3 ON/OFF button
This turns the power of ZONE3 on/off.
ZONE3 SOURCE button
This selects the input source for ZONE3.
STATUS button
Each press of this switches the status information that is shown
on the display.
Information button (INFO)
This displays the status information on the TV screen.
Cursor buttons
These select items.
OPTION button
This displays the option menu on the TV screen.
DIMMER button
Each press of this switches the brightness of the display.
QUICK SELECT buttons
These call up settings registered to each button, such as input
source, volume level and sound mode settings.
HOME
FRONT PANEL Buttons and Connectors Behind the
Compartment Door (2 of 2) 3
Buttons and Connectors Behind the Compartment Door (2 of 2)
AUX1 HDMI connector
This is used to connect HDMI output compatible devices such as
video camcorders and game consoles.
USB port
This is used to connect USB storages (such as USB memory devices)
and the USB cable supplied with iPod.
Headphones jack (PHONES)
This is used to connect headphones.
When the headphones are plugged into this jack, audio will no longer
be output from the connected speakers or from the PRE OUT
connectors.
NOTE
To prevent hearing loss, do not raise the volume level excessively
when using headphones.
BACK button
This returns to the previous screen.
ENTER button
This determines the selection.
SETUP button
This displays the menu on the TV screen.
AUX1 INPUT connector
Used to connect analog output compatible devices such as video
camcorders and game consoles.
SETUP MIC jack
This is used to connect the supplied Sound calibration microphone.
HOME DISPLAY
Buttons and Connectors Behind the
Compartment Door (1 of 2) 4
Display
Input signal indicators
The respective indicator will light corresponding to the input signal.
Decoder indicators
These light when Dolby or DTS signals are input or when the Dolby or DTS
decoder is running.
Audyssey®indicator
This lights when “MultEQ®XT32”, “Dynamic EQ”, “Dynamic Volume”,
“Audyssey DSX®” or “Audyssey LFCTM” is set.
Tuner reception mode indicators
These light up according to the reception conditions when the input source is
set to “HD Radio”.
TUNED: Lights up when the broadcast is properly tuned in.
STEREO: Lights up when receiving FM stereo broadcasts.
Monitor output indicator
These light according to the HDMI monitor output setting. When set to
“Auto(Dual)”, the indicators light according to connection status.
MULTI ZONE indicator
This lights up when ZONE2 or ZONE3 (separate room) power is turned on.
Sleep timer indicator
This lights when the sleep mode is selected.
MUTE indicator
This blinks while the sound is muted. link,
Volume indicator
Information display
The input source name, sound mode, setting values and
other information are displayed here.
Front speaker indicator
This lights according to the setting of the front A and B
speakers.
Input/output signal channel indicators
The channel for input/output signals is displayed according to
the setting configured for “Channel Indicators”.
•When “Channel Indicators” is set to “Output” (Default)
These light when audio signals are being output from the
speakers.
•When “Channel Indicators” is set to “Input” These light
corresponding to the channels that include the input
signals.
When playing HD Audio sources, the EXT indicator lights
when a signal from an extension channel (a channel other
than the front, center, surround, surround back, front height,
front wide or LFE channel) is input.
123456789
HOME REAR PANEL 1
Buttons and Connectors Behind the
Compartment Door (2 of 2) 5
Rear Panel (1 of 2)
HOME
Bluetooth/wireless LAN antenna connectors
Used to connect the included external antennas for
Bluetooth/wireless connectivity when connecting to a network
via wireless LAN, or when connecting to a handheld device via
Bluetooth.
•Place the external antennas for Bluetooth/wireless
connectivity evenly over the screw terminal of rear.
•Turn clockwise until the antennas is fully connected.
•Rotate the antenna upwards for best reception.
Denon Link HD connector
Used to connect a Denon Link HD compatible Blu-ray Disc player.
SIGNAL GND terminal
Used to connect a ground wire for the turntable.
Analog audio connectors (AUDIO)
Used to connect devices equipped with analog audio connectors.
7.1-channel input connectors (7.1CH IN)
Used to connect to a device that has multi-channel audio output connectors.
HDMI connectors
Used to connect devices equipped with HDMI connectors.
NETWORK connector
Used to connect to a LAN cable when connecting to a wired LAN network.
USB port
This is used to connect USB storages (such as USB memory devices) and the
USB cable supplied with iPod.
AC inlet (AC IN)
Used to connect the power cord.
REAR PANEL 2DISPLAY 6
FM/AM antenna terminals (ANTENNA)
Used to connect FM antennas and AM loop antennas.
TRIGGER OUT jacks
Used to connect devices equipped with the trigger function. 1@
REMOTE CONTROL jacks
Used to connect infrared receivers/transmitters in order to
operate this unit and external devices from a different room.
RS-232C connector
Used to connect home automation controller devices fitted with
RS-232C connectors. Consult the owner’s manual of the home
automation controller for more information about serial control of
this unit.
•Perform the operation below beforehand.
•Turn on the power of this unit.
•Turn off the power of this unit from the external controller.
•Check that the unit is in the standby mode.
Digital audio connectors (DIGITAL AUDIO)
Used to connect devices equipped with digital audio connectors.
Speaker terminals (SPEAKERS)
Used to connect speakers.
PRE OUT connectors
Used to connect a subwoofer with built-in amplifier or an external power
amplifier.
Video connectors (VIDEO)
Used to connect devices equipped with video connectors.
Component video connectors (COMPONENT VIDEO)
Used to connect devices equipped with component video connectors.
HOME
Rear Panel (2 of 2)
REMOTE CONTROL 1REAR PANEL 1 7
HOME
Remote Control (1 of 4)
indicator
This is lit when signals are sent from the remote control unit.
Zone select button (ZONE SELECT)
These switch the zone (MAIN ZONE, ZONE2, ZONE3) that is operated
through the remote control unit.
AVR operation button
When preset codes are registered to the remote control unit, press
this button and then operate the menu on the unit.
Display
1. Zone select indicators
2. Information indicator
•This displays “AVR” when operating this unit.
•This displays the input source name when operating an external
device.
•This displays “TV” when operating TV.
•This displays details about the setting on the remote control unit.
Device operation buttons (DEVICE / DEVICE MENU)
These turn the power of external devices on/off and call up menus.
Preset codes need to be registered in order to use these buttons.
Input source select buttons
These select the input source.
REMOTE CONTROL 2REAR PANEL 2 8
HOME
Remote Control (2 of 4)
QUICK SELECT buttons (1 – 4).
These call up settings registered to each button, such as input source,
volume level and sound mode settings.
Channel/page search buttons (CH/PAGE ▲▼).
These select radio stations registered to presets or switch pages.
MUTE button ().
This mutes the output audio.
Information button (INFO).
This displays the status information on the TV screen.
Cursor buttons ( ).
These select items.
BACK button.
This returns to the previous screen.
System buttons.
These perform playback related operations.
Skip buttons ()
Play button ()
Search buttons ()
Pause button ()
Stop button ()
Tuning up / Tuning down buttons (TUNE +, –).
These select either FM broadcast or AM broadcast.
REMOTE CONTROL 3REMOTE CONTROL 1 9
HOME
Remote Control (3 of 4)
Number / Character buttons
These enter letters or numbers into the unit.
Remote control signal transmitter
This transmits signals from the remote control unit.
POWER button ( )
This turns the power on/off.
TV operation buttons (TV / TV MENU / TV INPUT)
These turn the TV power on/off, switch the TV input and call up
menus.
Preset codes need to be registered in order to use these buttons.
ECO Mode button ( )
This switches to ECO Mode.
VOLUME buttons ()
These adjust the volume level.
OPTION button
This displays the option menu on the TV screen.
ENTER button
This determines the selection.
REMOTE CONTROL 4REMOTE CONTROL 2 10
Andere Handbücher für AVR-X7200W
7
Inhaltsverzeichnis
Andere Denon Empfänger Handbücher
Denon
Denon AVR-S500BT Bedienungsanleitung
Denon
Denon AVR-X250BT Bedienungsanleitung
Denon
Denon AVR 4310CI Bedienungsanleitung
Denon
Denon AVR-5805CI AV Bedienungsanleitung
Denon
Denon AVR-X500 Bedienungsanleitung
Denon
Denon AVR-X4100W Bedienungsanleitung
Denon
Denon AVR-X4200W Bedienungsanleitung
Denon
Denon AVR-591 Bedienungsanleitung
Denon
Denon AVR-5805-UPGRADE Bedienungsanleitung
Denon
Denon AVR-5805CI AV Bedienungsanleitung
Denon
Denon AVR-1513 Bedienungsanleitung
Denon
Denon AVR-S950H Series Bedienungsanleitung
Denon
Denon AVR-987 Bedienungsanleitung
Denon
Denon AVR-X2400H Bedienungsanleitung
Denon
Denon AVR-1609 Bedienungsanleitung
Denon
Denon AVR-488 Bedienungsanleitung
Denon
Denon AVR 2808CI - AV Receiver Bedienungsanleitung
Denon
Denon AVR-E300 Bedienungsanleitung
Denon
Denon AVR-X2400H Bedienungsanleitung
Denon
Denon AVR 689 - AV Receiver Bedienungsanleitung
