Denso BHT-805BW Handbuch



Introduction

Preparation

Using the BHT

Charging

Troubleshooting

ŶUsage Precautions ..................................1

ŶWireless Equipment.................................2

ŶProduct Contents Check..........................3

ŶProper Care of the BHT...........................4

ŶComponents and Functions.....................5

ŶInput Method............................................9

ŶPreparation............................................10

ŶStep 1 Charging.....................................10

ŶStep 2 Attaching the Hand Strap............15

ŶStep 3 Turning ON the Power................16

ŶScanning Barcodes ...............................18

ŶChanging the Default Settings...............20

ŶTransmitting Data ..................................22

ŶBattery Power Level Indicator................25

ŶReplacing the Battery Cartridge.............26

ŶUsing the BHT after Long Periods .........28

ŶTroubleshooting Guideäääääää29

Operator’s Guide

BHT-805BW

Thank you for using the BHT-805BW DENSO WAVE Barcode Handy Terminal.

Please read this manual thoroughly prior to operation to ensure full use of the

product’s functionality, and store safely in a convenient location for quick reference

even after reading.

This manual contains only the basic details required for operation.

Please refer to the User’s Manual for further details on general operation.

The User’s Manual can be downloaded free of charge from the DENSO WAVE Web

site (QBdirect).

The latest precision manufacturing technology yields LCD panels with an effective

resolution of 99.99% or higher. The downside, however, is that up to 0.01% of the

pixels can remain permanently dark or lit on today’s state-of-the-art panels.

Furthermore, please be aware that individual differences may occur in the screen

color and brightness due to the characteristics of the white LEDs used in the LCD

display backlight.

About this Manual

ƔDue to improvements and so on, the content of this manual may be subject to

change without prior notice.

ƔThe reproduction or duplication of the whole or part of this manual is strictly

prohibited without prior consent.

ƔPlease contact DENSO WAVE if this manual is lost.

ƔEvery attempt has been made to ensure that the content of this manual is

thorough and up to date, however, we kindly ask that any questionable content,

mistakes, or omissions be reported to DENSO WAVE.

Related Manuals

The following manuals can all be downloaded free of charge from the DENSO WAVE

Web site (QBdirect).

http://www.qbdirect.net

BHT-805BW User’s Manual

Instructions for using the handy terminal (BHT-805BW) and optical communication

unit (CU-800)

BHT-BASIC Application Development Manual (For Beginners)

Description of commonly used functions intended for those developing applications

with BHT-BASIC for the first time

BHT-BASIC Programmer’s Manual (For BHT-800 Series)

Description for developing application programs of the handy terminal in

BHT-BASIC

BHT-BASIC 4.0 Transfer Utility User’s Guide

Description about software that transmits data and programs between the handy

terminal and computer

iii

Liability Limitations

xDENSO WAVE INCORPORATED does not assume any product liability (including

damages for lost profits, interruption of operations, or the loss of business-related

information) arising out of, or in connection with, the use of, or inability to use the

BHT system software or related manuals.

xDENSO WAVE INCORPORATED (“DENSO WAVE”) takes reasonable precautions

to ensure its products do not infringe upon any patents or other intellectual property

rights of other(s). However, DENSO WAVE cannot be responsible for any patent or

other intellectual property right infringement(s) or violation(s) arising from any of

the following.

(1) The use of DENSO WAVE’s products in connection or in combination with

other components, products, devices, data processing systems or software

not supplied by DENSO WAVE.

(2) The use of DENSO WAVE’s products in a manner for which they were not

intended nor designed.

(3) The modification of DENSO WAVE’s products by parties other than DENSO

WAVE.

xIf it is judged by DENSO WAVE INCORPORATED that malfunction of the product

is due to the product having been dropped or subjected to impact, repairs will be

made at a reasonable charge even within the warranty period.

Customer Registration

To allow us to provide our customers with comprehensive service and support, we

request that all customers complete a Member Registration Form. Registered

members will be offered the following privileges.

xThe latest upgrade information

xFree exhibition and event information for new products

xFree Web-information service “QBdirect.”

QBdirect Service Contents

Information searching

service (FAQ) Offers detailed information on each product.

Download service Offers download of repair modules for the latest BHT

Series systems or software, and sample programs.

E-mail inquiries Product related queries can be sent in by e-mail.

* Please note that these privileges may be subject to change without prior notice.

How to Register

Access the URL below and follow the instructions provided.

http://www.qbdirect.net

SAFETY PRECAUTIONS

Be sure to observe all these safety precautions.

Strict observance of these warning and caution indications are a MUST for preventing

accidents which could result in bodily injury and substantial property damage. Make

sure you fully understand all definitions of these terms and related symbols given

below, before you proceed on to the text itself.

Alerts you to those conditions which could cause

serious bodily injury or death if the instructions are

not followed correctly.

Alerts you to those conditions which could cause

minor bodily injury or substantial property damage if

the instructions are not followed correctly.

Meaning of Symbols

A triangle ( ) with a picture inside alerts you to a warning of danger.

Here you see the warning for electrical shock.

A diagonal line through a circle ( ) alerts you to something you should

not do; it may or may not have a picture inside. Here you see a

screwdriver inside the circle, meaning that you should not disassemble.

A black circle ( ) with a picture inside alerts you to something you

MUST do. This example shows that you MUST unplug the power cord.

To System Designers:

xWhen introducing BHTs in those systems that could affect human

lives (e.g., medicines management system), develop applications

carefully through redundancy and safety design which avoids the

feasibility of affecting human lives even if a data error occurs.

Handling the battery cartridge

xNever disassemble or heat the rechargeable battery cartridge, nor

put it into fire or water; doing so could cause battery-rupture or

leakage of battery fluid, resulting in a fire or bodily injury.

xDo not carry or store the battery cartridge together with metallic

ballpoint pens, necklaces, coins, hairpins, etc.

Doing so could short-circuit the terminal pins, causing the batteries to

rupture or the battery fluid to leak, resulting in a fire or bodily injury.

xNever put the battery cartridge into a microwave oven or

high-pressure container.

Doing so could cause the batteries to break, generate heat, rupture

or burn.

xAvoid dropping the battery cartridge or letting it undergo any shock or

impact.

Doing so could cause the batteries to break, generate heat, rupture

or burn.

xNever charge the rechargeable battery cartridge where any

inflammable gases may be emitted; doing so could cause fire.

xOnly use the dedicated charger for charging the rechargeable battery

cartridge.

Using a different type of charger could cause battery-rupture or

leakage of battery fluid and result in a fire, bodily injury, or serious

damage to property.

Handling the BHT

xNever put the BHT into a microwave oven or high-pressure container.

Doing so could cause the BHT to break, generate heat, rupture or

burn.

vii

Handling the battery cartridge

xNever charge a wet or damp rechargeable battery cartridge.

Doing so could cause the batteries to break, generate heat, rupture

or burn.

Handling the BHT

xIf smoke, abnormal odors or noises come from the BHT, immediately

turn off the power, pull out the battery cartridge, and contact your

nearest dealer.

Failure to do so could cause smoke or fire.

xIf foreign material or water gets into the BHT, immediately turn off the

power, pull out the battery cartridge, and contact your nearest dealer.

Failure to do so could cause smoke or fire.

xIf you drop the BHT so as to damage its housing, immediately turn off

the power, pull out the battery cartridge, and contact your nearest

dealer.

Failure to do so could cause smoke or fire.

xDo not use batteries or power sources other than the specified ones;

doing so could generate heat or cause malfunction.

xWhen using the hand strap or neck strap, exercise due care to avoid

getting them caught in other objects or entangled in rotating

machinery.

Failure to do so could result in accident or injury.

Never

disas-

sembly

xNever disassemble or modify the BHT; doing so could result in an

accident such as breakage or fire.

xNever put the BHT in places where there are excessively high

temperatures, such as inside closed-up automobiles, or in places

exposed to direct sunlight.

Doing so could affect the housing or parts, resulting in a fire.

xAvoid using the BHT in extremely humid or dusty areas, or where

there are drastic temperature changes.

Moisture or dust will get into the BHT, resulting in malfunction, fire or

electrical shock.

viii

xIn environments where static electricity can build into significant

charges (e.g., if you wipe off the plastic plate with a dry cloth), do not

operate the BHT. Doing so will result in malfunction or machine

failure.

xWhen connecting or disconnecting the direct-connect interface cable

to/from the BHT, do not plug or unplug it at an angle, and do not pull

the cable strongly. Doing so will result in a machine failure.

x Do not place magnetic cards or the like near the BHT speaker.

Doing so may result in the loss of magnetic data from cash

cards, credit cards, etc.

x Do not place your ear near the speaker when tones are being

emitted. Doing so may result in hearing loss.

xIf the BHT has been stored in a hot (50°C to 60°C, 122°F to 140°F)

and humid place, allow it to sit at room temperature and humidity for

at least one day before use. Using the BHT with the inside being hot

will result in a scanning or machine failure.

FCC and IC Regulations

This device complies with Part 15 of the FCC Rules, Canada ICES-003, RSS-210

and RSS-Gen of IC Rules.

Operation is subject to the following two conditions :

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

FCC WARNING : Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his

own expense.

FCC Radiation Exposure Statement

This transmitter must not be co-located or operated in conjunction with any other

antenna or transmitter.

FCC/ IC Radiation Exposure Statement

The available scientific evidence does not show that any health problems are

associated with using low power wireless devices. There is no proof, however, that

these low power wireless devices are absolutely safe. Low power wireless devices

emit low levels of radio frequency energy (RF) in the microwave range while being

used. Whereas high levels of RF can produce health effects (by heating tissue),

exposure to low-level RF that does not produce heating effects causes no known

adverse health effects. Many studies of low-level RF exposures have not found any

biological effects. Some studies have suggested that some biological effects might

occur, but such findings have not been confirmed by additional research. This

Barcode Handy Terminal (BHT-805BW) that is installed DWWL001 (FCC ID:

PZWDWWL001/ IC: 1551C-DWWL001) has been tested and found to comply with

FCC/ IC radiation exposure limits set forth for an uncontrolled equipment and meets

the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65㩷and

RSS-102 of the IC radio frequency (RF) Exposure rules.

Inhaltsverzeichnis

Andere Denso Barcode-Lesegerät Handbücher

Denso

Denso BHT-7500S Bedienungsanleitung

Denso

Denso BHT-700-WM Bedienungsanleitung

Denso

Denso BHT-800 Series Handbuch

Denso

Denso BHT-604B Bedienungsanleitung

Denso

Denso GT20Q-SB Bedienungsanleitung

Denso

Denso BHT-300B Bedienungsanleitung

Denso

Denso 400BW-CE Bedienungsanleitung

Denso

Denso GT10B-SM Bedienungsanleitung

Denso

Denso GT10B-SB Bedienungsanleitung

Denso

Denso BHT-8000 Installationshandbuch

Denso

Denso BHT-500B Bedienungsanleitung

Denso

Denso BHT-1505B Bedienungsanleitung

Denso

Denso BHT-7000 Bedienungsanleitung

Denso

Denso GT10Q-SR Bedienungsanleitung

Denso

Denso GT10Q-SR Bedienungsanleitung

Denso

Denso BTH-300BW Bedienungsanleitung

Denso

Denso BHT-1700 Series Bedienungsanleitung

Denso

Denso BHT-1700BWB Gebrauchsanweisung

Denso

Denso BHT-100B Bedienungsanleitung

Denso

Denso BHT-302B Bedienungsanleitung

Denso

Denso BHT-400-CE Bedienungsanleitung

Denso

Denso BHT-6000 Bedienungsanleitung

Denso

Denso BHT-904BB Bedienungsanleitung

Denso

Denso GT10B-SU Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung

Atid

Atid AT188N Plus Bedienungsanleitung