Denso BHT-300BWB Handbuch

DENSO WAVE INCORPORATED does not assume any product liability arising

out of, or in connection with, the application or use of any product, circuit, or

application described herein.

If it is judged by DENSO WAVE INCORPORATED that malfunction of the product

is due to the product having been dropped or subjected to impact, repairs will be

made at a reasonable charge even within the warranty period.

Intellectual Property Precaution

DENSO WAVE INCORPORATED ("DENSO WAVE") takes reasonable

precautions to ensure its products do not infringe upon any patent of other

intellectual property rights of other(s), but DENSO WAVE cannot be responsible

for any patent or other intellectual property right infringement(s) or violation(s)

which arise from (i) the use of DENSO WAVE's product(s) in connection or in

combination with other component(s), product(s), data processing system(s) or

equipment or software not supplied from DENSO WAVE; (ii) the use of DENSO

WAVE's products in a manner for which the same were not intended nor

designed; or (iii) any modification of DENSO WAVE's products by other(s) than

DENSO WAVE.

Bluetooth®is a trademark owned by its proprietor. DENSO WAVE uses Bluetooth®

wireless technology under license.

Related Publications

BHT-300BWB User’s Manual (Contained in the Manual Pack CD. Download available at

our URL printed on the back cover of this operator’s guide.)

Instructions for using the handy terminal (BHT-300BWB) and optical

communication unit (CU-300).

BHT-BASIC Programmer’s Manual (BHT-300 series)

(Contained in the BHT-BASIC Compiler CD and Manual Pack CD)

Description for developing application programs of the handy terminal in

BHT-BASIC.

BHT-BASIC 4.0 Transfer Utility Guide (that comes with BHT-BASIC 4.0 Transfer Utility)

Description about software that transmits data and programs between the handy

terminal and computer.

Related Publications

BHT-300BWB User's Manual (Contained in the Manual Pack CD. Download available at

our URL printed on the back cover of this operator's guide.)

Instructions for using the handy terminal (BHT-300BWB) and optical

communication unit (CU-300).

BHT-BASIC Programmer's Manual (BHT-300 series)

(Contained in the BHT-BASIC Compiler CD and Manual Pack CD)

Description for developing application programs of the handy terminal in

BHT-BASIC.

BHT-BASIC 4.0 Transfer Utility Guide (that comes with BHT-BASIC 4.0 Transfer Utility)

Description about software that transmits data and programs between the handy

terminal and computer.

Contents

SAFETY PRECAUTIONS...........................................................................................................5

Components and Functions........................................................................................................9

Reading 2D Codes and Bar Codes ..........................................................................................11

Using Radio Link and Bluetooth®Wireless Communication Link .............................................13

Using Infrared Link....................................................................................................................14

Setting the Backlight .................................................................................................................15

Adjusting the LCD Contrast & Beeper Volume and Switching the Beeper & Vibrator..............16

Displaying the Battery Voltage Level........................................................................................17

Loading the Battery Cartridge...................................................................................................18

Battery Replacement Notes......................................................................................................19

BHT Turning-off Notes..............................................................................................................20

Error Messages ........................................................................................................................21

Proper Care of the BHT ............................................................................................................26

Handling Notes .........................................................................................................................27

US and Canada Regulations ....................................................................................................28

Labeling ....................................................................................................................................29

Customer Registration Form.....................................................................................................30

SAFETY PRECAUTIONS

Be sure to observe all these safety precautions.

Strict observance of these warnings and cautions is a MUST for preventing

accidents that could result in bodily injury and substantial property damage. Make

sure you fully understand all definitions of these terms and symbols given below

before you proceed to the text itself.

Alerts you to those conditions that could cause

serious bodily injury or death if the instructions are

not followed correctly.

Alerts you to those conditions that could cause minor

bodily injury or substantial property damage if the

instructions are not followed correctly.

Meaning of Symbols

A triangle ( ) with a picture inside alerts you to a warning of danger.

Here you see the warning for electrical shock.

A diagonal line through a circle ( ) warns you of something you should

not do; it may or may not have a picture inside. Here you see a

screwdriver inside the circle, meaning that you should not disassemble.

A black circle ( ) with a picture inside alerts you to something you

MUST do. This example shows that you MUST unplug the power cord.

To System Designers:

•When introducing BHTs in those systems that could affect human lives

(e.g., medicines management system), develop applications carefully

through redundancy and safety design which avoids the feasibility of

affecting human lives even if a data error occurs.

Handling the battery cartridge

•Never disassemble or heat the battery cartridge, nor put it into fire or

water; doing so could cause battery-rupture or leakage of battery fluid,

resulting in a fire or bodily injury.

•Do not carry or store the battery cartridge together with metallic

ball-point pens, necklaces, coins, hairpins, etc.

Doing so could short-circuit the terminal pins, causing the batteries to

rupture or the battery fluid to leak, resulting in a fire or bodily injury.

•Avoid dropping the battery cartridge or letting it undergo any shock or

impact.

Doing so could cause the batteries to break, generate heat, rupture or

burn.

•Only use the dedicated charger for charging the battery cartridge.

Using a different type of charger could cause battery-rupture or leakage

of battery fluid and result in a fire, bodily injury, or serious damage to

property.

•Never charge the battery cartridge where any inflammable gases may

be emitted; doing so could cause fire.

Handling the BHT

• The BHT uses a laser light for indicating the scanning range. The

intensity of the laser light might be too low to inflict bodily injury.

However, do not look into the laser beam.

The BHT complies with IEC 60825-1:1993+A2:2001 and 21 CFR

1040.10, 1040.11 except for deviations pursuant to laser notice No.

50, dated July 26, 2001.

In accordance with Clause 5, IEC 60825-1, the following information

is provided to the user:

Caution - Use of controls or adjustments or performance of

procedures other than those specified herein may result in hazardous

laser light exposure.

LASER LIGHT

DO NOT STARE INTO BEAM

CLASS 2 LASER PRODUCT

Handling the battery cartridge

•Never charge a wet or damp rechargeable battery cartridge.

Doing so could cause the batteries to break, generate heat, rupture or

burn.

Handling the BHT

•Never put the BHT in places where there are excessively high tempera-

tures, such as inside closed-up automobiles, or in places exposed to

direct sunlight.

Doing so could affect the housing or parts, resulting in a fire.

•Avoid using the BHT in extremely humid or dusty areas, or where there

are drastic temperature changes.

Moisture or dust will get into the BHT, resulting in malfunction, fire or

electrical shock.

•Never disassemble or modify the BHT; doing so could result in an

accident such as break or fire.

Never

disas-

semble

•If smoke, abnormal odors or noises come from the BHT, immediately

turn off the power, pull out the battery cartridge, and contact your

nearest dealer.

Failure to do so could cause smoke or fire.

•If foreign material or water gets into the BHT, immediately turn off the

power, pull out the battery cartridge, and contact your nearest dealer.

Failure to do so could cause smoke or fire.

•If you drop the BHT so as to damage its housing, immediately turn off

the power, pull out the battery cartridge, and contact your nearest

dealer.

Failure to do so could cause smoke or fire.

•Do not use batteries or power sources other than the specified ones;

doing so could generate heat or cause malfunction.

•In environments where static electricity can build into significant

charges (e.g., if you wipe off the plastic plate with a dry cloth), do not

operate the BHT. Doing so will result in malfunction or machine failure.

•When connecting or disconnecting the direct-connect interface cable

to/from the BHT, do no plug or unplug at an angle and do not pull the

cable strongly. Doing so will result in a machine failure.

•If the BHT has been stored in a hot (50°C to 60°C, 122°F to 140°F) and

humid place, allow it to sit at room temperature and humidity for at least

one day before use. Using the BHT with its inside being hot will fail to

scan or result in a machine failure.

 Limited Warranty on Software Products

In no event will DENSO WAVE INCORPORATED be liable for direct, indirect,

special, incidental, or consequential damages (including imaginary profits or

damages resulting from interruption of operation or loss of business information)

resulting from any defect in the software or its documentation or resulting from

inability to apply the software or its documentation.

Components and Functions

Liquid crystal display (LCD)

Shows the characters and graphic patterns.

Indication LED

Illuminates in green when the BHT has successfully read a 2D code or bar code.

Trigger switch (M4 key)

Press this switch to start code reading.

Trigger switch

(M3 key)

Press this switch to start code

reading.

IrD

interface port

Used to exchange data/programs

with the host computer via its

integrated IR port or via the optical

communication unit CU-300.

Hand strap

Be sure to put your hand

through this strap to

prevent you from dropping

the BHT accidentally.

Reading window

Battery cover lock

Use this lock to lock/unlock the battery

cover.

Battery cover

Remove this cover to replace the

battery cartridge.

Built-in antenna

Do not cover this antenna

section with metal-evaporated

tape or by hand.

Doing so may result in

communications failures.

Connector cover

Inside this cover is the direct-connect

interface port.

Trigger switch

(M3 key)

Trigger switch

(M4 key)

Magic keys (M1 to M4)

Each of the M3 and M4 keys

is assigned a trigger switch

by default.

Depending upon definition in

System Mode or in user

programs, M1 to M4 keys can

be used as any of the SF key,

ENT key, and backlight

function on/off key. These

keys can be also assigned

string data.

Cursor keys (F5 to F8)

Used to move up to the

preceding line, down to the next

line, to the preceding character,

and to the next character.

Numerical keys

Used for data input.

ENT (Enter) ke

Finalizes the input data or

operations, and starts the

corresponding processing.

Function keys

Used for choosing

functions.

C (Clear) ke

Clears the last inputted data or

returns to the original screen.

SF (Shift) ke

Used in combination with

numerical keys for special input

procedures.

Power ke

Turns the BHT on or off.

BS (Backspace)

key

Moves back one

character.

Inhaltsverzeichnis

Andere Denso Barcode-Lesegerät Handbücher

Denso

Denso BHT-800 Series Handbuch

Denso

Denso BHT-1700BWB Gebrauchsanweisung

Denso

Denso BHT-400-CE Bedienungsanleitung

Denso

Denso BHT-805BWB Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Denso

Denso BHT-202Q-CE Handbuch

Denso

Denso BHT-8000 Bedienungsanleitung

Denso

Denso BHT-8000 Bedienungsanleitung

Denso

Denso BHT-4000 Bedienungsanleitung

Denso

Denso BHT-904B Bedienungsanleitung

Denso

Denso BHT-700-WM Bedienungsanleitung

Denso

Denso BHT-1505B Bedienungsanleitung

Denso

Denso BHT-302B Bedienungsanleitung

Denso

Denso BHT-904BB Bedienungsanleitung

Denso

Denso BHT-700-CE Bedienungsanleitung

Denso

Denso BHT-300B Bedienungsanleitung

Denso

Denso BHT-8000 Installationshandbuch

Denso

Denso GT10Q-SR Bedienungsanleitung

Denso

Denso GT10B-SM Bedienungsanleitung

Denso

Denso BHT-7500S Bedienungsanleitung

Denso

Denso BHT-805B Bedienungsanleitung

Denso

Denso BHT-6000 Bedienungsanleitung

Denso

Denso AT20B-SM Bedienungsanleitung

Denso

Denso 400BW-CE Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung

Atid

Atid AT188N Plus Bedienungsanleitung