Deta-Elis DeVita Professional Bedienungsanleitung

Note the meaning of below terms used in the manual:

THERAPY = HEALTH IMPROVEMENT and DIAGNOSTICS = PROGNOSIS OF HEALTH STATUS

Note the meaning of below terms used in the manual:

THERAPY = HEALTH IMPROVEMENT and

DIAGNOSTICS = PROGNOSIS OF HEALTH STATUS

Note the meaning of below terms used in the manual:

THERAPY = HEALTH IMPROVEMENT and DIAGNOSTICS = PROGNOSIS OF HEALTH STATUS

Note the meaning of below terms used in the manual:

THERAPY = HEALTH IMPROVEMENT and DIAGNOSTICS = PROGNOSIS OF HEALTH STATUS

6.7. CONTRAINDICATIONS TO USING VRT MEASURES ..............................................................................................

6.8. QUADRANT TESTING .................................................................................................................................................................

Setting up for quadrant testing ...........................................................................................................................................

Conducting quadrant testing ................................................................................................................................................

Interpreting the quadrant testing results .....................................................................................................................

7. WELLNESS MODES ................................................................................................................................................................................

7.1. BIORESONANCE (BRT) EFFECT MODE ..........................................................................................................................



Using BRT against allergies ..................................................................................................................................................

Wellness with BRT, autonosodes and ES ..........................................................................................................





Checking that BRT is working ............................................................................................................................................

7.2. ELECTROACUPUNCTURE EFFECT MODE .................................................................................................................

7.3. ELECTROMAGNETIC EFFECT MODE ..............................................................................................................................

Auto mode .......................................................................................................................................................................................

Manual mode (without swing) ............................................................................................................................................

Manual mode (with swing) ...................................................................................................................................................

7.4. QUANTUM EFFECT MODE ....................................................................................................................................................

7.5. COMPLEX EFFECT MODE .....................................................................................................................................................

8. PREPARING HOMEOPATHIC REMEDIES ................................................................................................................................

Copying homeopathic vials ..................................................................................................................................................

Preparing homaccord copies of single homeopathic remedies using the ES ...................................

Making homeopathic homaccords using the ES ...................................................................................................

How do we do this? .....................................................................................................................................................................

9. STORAGE .....................................................................................................................................................................................................

10. TRASPORTATION ................................................................................................................................................................................

11. ENVIRONMENT PROTECTION .....................................................................................................................................................

12. CERTIFICATE OF ACCEPTANCE .................................................................................................................................................

13. MANUFACTURER’S WARRANTY ............................................................................................................................................

14. APPENDIX. Manufacturer EC Declaration of Conformity ...........................................................................

CONTENT

1. INTRODUCTION ...........................................................................................................................................................................................

2. SPECIFICATION ...........................................................................................................................................................................................

The measure mode ....................................................................................................................................................................





Electronic selector (ES) ...............................................................................................................................................



Power ...........................................................................................................................................................................................

Operating conditions ...................................................................................................................................................................



Package contents ..........................................................................................................................................................................

3. RULES FOR USING THE DEVICE ...................................................................................................................................................

Operating conditions ...................................................................................................................................................................

Safety measures ...........................................................................................................................................................................

4. SETTING UP THE DEVICE - BASIC SETUP ..............................................................................................................................

5. EXPLANATION OF THE BASIC MODULES OF THE PROFESSIONAL .....................................................................

Measuring Module ......................................................................................................................................................................

Electronic Selector Module ....................................................................................................................................................

Wellness Module –Therapy Unit .........................................................................................................................................

Wellness Module - Bioresonance Unit ...........................................................................................................................

6. MEASURE MODE – BASIC PRINCIPLES .................................................................................................................................

6.1. MEASURE ....................................................................................................................................................................................

Setting up the device for measure ....................................................................................................................................

VRT Testing Using the Electronic Selector (ES) .........................................................................................................

VRT testing using the resonator (honeycomb) with ampoules ......................................................................

6.2. ELECTRONIC SELECTOR (ES) .............................................................................................................................................

6.3. SETTING UP FOR BIORESONANCE MEASURES ......................................................................................................

Search Techniques and Electrical Parameter Measurement of Biological

Active Points (BAP) ......................................................................................................................................................................

6.4. DIRECT BIORESONANCE TESTING ...................................................................................................................................

Where in the body? What organ? .......................................................................................................................................





6.5. IS IT POSSIBLE TO TEST DIFFERENT THINGS AT THE SAME TIME? ..........................................................

6.6. USING COMPLEX FILTERS TO PRIORITIZE ...................................................................................................................



Note the meaning of below terms used in the manual:

THERAPY = HEALTH IMPROVEMENT and DIAGNOSTICS = PROGNOSIS OF HEALTH STATUS

Note the meaning of below terms used in the manual:

THERAPY = HEALTH IMPROVEMENT and DIAGNOSTICS = PROGNOSIS OF HEALTH STATUS

1. INTRODUCTION



on its circulation was expressed by ancient Esculapians of China, India, and Egypt. Every human

          

factors, modern life full of stresses, bad environment, its frequencies deviate from their natural

parameters, and a risk of reduction of body defences can occur.





its energy balance either in the whole or locally.

The most important advantage of DeVita Professional is the availability of device for measuring

the level of the body's condition and programs for health support by sessions. This allows you to

choose an individual prophylactic course for each person.

Wellness technique is a healthy diet, moderate physical exercises, fresh air, and cessation from

harmful habits - largely reduces the risk of various diseases. However, in today’s world it is not

always possible to commit oneself to the concept of wellness consistently. This is especially true

for large cities, with their constant stresses, rapid way of life and a poisoned environment.

DeVita-Professional devices are designed to help the body to maintain vitality at a high level, to



years to come.

2. SPECIFICATION

The measure mode

In the measure mode, measurements can be made according to the methods of Dr. Voll

and Dr. Schimmel. Parameters used are:

• Conductivity indicator ranges from 0 to 100

• Accuracy of measurement, ± 1%

• Voltage between the measure probe and hand electrode is 1.25 V

• Measure current is not greater than 12.5 mkA



• LED lights for «LOW POWER» and «VEGATEST» mode





• The Output signal can be of positive polarity, negative polarity, bipolar, bipolar inverse

• Pulse duration at level of 0.5 = 1 ms

• Range of pulse repetition rate, 0.1-99.99 Hz

• Maximum error of frequency setting, not more than ± 5%





• Output signal is a bipolar pulse bundle with a high frequency

• Range of pulse packet repetition rate, 0.1- 99.99 Hz

• Maximum frequency error of frequency setting, not more than ± 5%

Electronic selector (ES)



• 22800 digitized remedies of a wide variety of homeopathics

• A further 25200 empty memory slots to input your own remedies, foods and homeopathic

remedies

• The maximum number of remedies that can be given simultaneously to the visitor is 18





• Dynamic range, 0.1-99.99Hz

• Maximum error of frequency setting, not more than ± 5%

• Optic range, nm 468, 525, 590, 660, 880

Power

• AC adapter 220V/50Hz 12V/0.5A

• Current consumption, not more than, 0.33A

Operating conditions

• Ambient temperature from 10 to 35°C

• Relative humidity 80% at 25 °C



• PC connection assembly interface “BS-8”

• Average service life, not less than 5 years



• Weight: without accessories and spare parts 3 kg; as a whole unit 7 kg

Package Contents

1 x Device «DeVita Professional»

2 x Brass hand electrodes cylinders

2 x Brass foot electrode plates

1 x Universal measure probe

Note the meaning of below terms used in the manual:

THERAPY = HEALTH IMPROVEMENT and DIAGNOSTICS = PROGNOSIS OF HEALTH STATUS

Note the meaning of below terms used in the manual:

THERAPY = HEALTH IMPROVEMENT and DIAGNOSTICS = PROGNOSIS OF HEALTH STATUS

1 x Honeycomb cell for ampules

1 x Round metallic dish

1 x Beaker with lid

1 x Electrodes for recording on water



1 x External Antenna unit

1 x Computer interface «BS-8» with «EAVPRO 5.0» program

1 x Power supply unit

1 x Cables set

1 x Documentation set

3. RULES FOR USING THE DEVICE

Operating conditions



an antistatic mat and avoid carpet that tends to accumulate static charge. Shoes should be worn

as bare feet can also accumulate static charge. Wooden chairs are best, covered with cotton fabric,

not synthetic. High frequency electrical equipment should not be close by, not computers and radio



be kept to a minimum.

Safety measures

Do not connect the device to an AC adapter with a damaged power cord. Do not attempt to

repair the device yourself. If a fault occurs, please contact a service centre.



The device can be set up relatively easily by following these simple instructions:

1. Connect the AC adapter to the «12V» socket on the device (see Fig.3, number 2). The polarity

of the voltage does not matter.

2. Insert the AC adapter into a wall socket with 220V voltage.

3. Turn on the device with the «12V» switch. On the front of the device, the «PROB» LED should

illuminate.



unplug the AC adapter.

Warning: The «LOW POWER» LED indicates a reduced voltage power supply. In this case, the

exact correspondences of the technical parameters of the apparatus to the indicated standards

are not guaranteed.



OF THE PROFESSIONAL

The «DeVita Professional» device includes the following basic modules (Fig. 1).

  – used for measuring the level of the body's condition according

to Dr. Voll and VRT testing according to Dr. Schimmel.

   – contains 22, 800 digitized remedies of a wide variety

of homeopathics, as well as a further 25, 200 empty memory slots to input your own remedies,

foods and homeopathic remedies.

3-Wellness  Unit – controls for using Electroacupuncture,



4-Wellness  Unit      

on the body. On the right side of the device are sockets to connect the individual modules

together (Fig. 2).

Fig. 1: External view of the DEVITA PROFESSIONAL

Note the meaning of below terms used in the manual:

THERAPY = HEALTH IMPROVEMENT and DIAGNOSTICS = PROGNOSIS OF HEALTH STATUS

Note the meaning of below terms used in the manual:

THERAPY = HEALTH IMPROVEMENT and DIAGNOSTICS = PROGNOSIS OF HEALTH STATUS

Socets (Fig. 2)

1 - «INPUT BRT» – Bioresonance Unit Input;

2 - «OUTPUT BRT» – Bioresonance Unit Output;

3 - «SEL» – Electronic Selector output;

4 - «ACTIVE» – active electrode Output.

Connected to the PROBE;

5 - «PASSIVE» – 1st passive electrode Outputs;

6 - «PASSIVE» – 2nd passive electrode Outputs;

7 - «PROBE» – universal Probe Input connection.

Key and Socets (Fig. 3)

1 - POWER ON/OFF «12V» Switch

2 - Power supply unit input «12V»

3 - QUANTUM light connector



5 - BS-8 interface block connector – for computer connection

Fig. 2: Right side view

1 2 3 4 5 6 7 8 9

10 11

Abduction or quadrant section



Output for quadrant leads;

9 - «RH» – «right hand»

Output for quadrant leads;



Output for quadrant leads;

11 - «RF» – «right foot»

Output for quadrant leads.

43 5

Fig. 3: Rear view



6.1 MEASURE

Setting up the device for measure

In order to begin using the bioresonance measures using the Universal probe (we will refer to it

 panel

(see Fig. 4, number 4).

In this case, the «PROB» LED illuminates green (Fig. 4, number 2).

Then on the «THERAPY» panel (Fig. 6), set the «THERAPY/DIAGNOSTICS» button to the

«DIAGNOSTICS» position.



to do the following:

1. Connect a wire from the «PASSIVE» socket (Fig. 2) to a brass hand electrode

2. Connect a short wire from the selector output «SEL» to the second socket «PASSIVE» (Fig. 2)

3. Insert the Measure probe (Fig. 5) into the socket «PROBE» (Fig. 2).

The DeVita Professional device allows for

measure according to the methods developed

by Dr. Voll and Dr. Schimmel. The «

panel to control the measure mode is shown

in Fig. 4.

There are three indicator LED lights on

       

GREEN in colour accept when in

Electroacupuncture mode when it will turn

         

POWER indicator if the correct voltage is

not being maintained. The second LED light

(no. 2) will be green when the PROBE button

is pressed on the panel. The third LED light

is the VEGATEST light which will be green

when the device is in the VRT MEASURE mode

(pressing the second button on the Measure



on the  panel (see Fig. 6).

4 65 7 8



Note the meaning of below terms used in the manual:

THERAPY = HEALTH IMPROVEMENT and DIAGNOSTICS = PROGNOSIS OF HEALTH STATUS

Note the meaning of below terms used in the manual:

THERAPY = HEALTH IMPROVEMENT and DIAGNOSTICS = PROGNOSIS OF HEALTH STATUS

VRT Testing Using the Electronic Selector (ES)



Testing (VRT) according to Dr. Schimmel, the following set-up is required – see summary in

Diagram 1 below:

1 2



The protocols used for using bioresonance

measures and determining the deviations from

wellness standards are beyond the scope of this

manual. It will be taught in the intensive wellness

practicum that is an essential part of training to

use this sophisticated device. The manual is only

designed to help the practitioner set the device

up and it is good to really familiarize yourselves

with this. 

Diagram 1: VRT Testing Using the Electronic Selector (ES)

1. Connect

HAND ELECTRODE

(brass cylinder)

to PASSIVE

connector

VOLL OR VRT MODE

CONNECTING THE ELECTRONIC SELECTOR

2. Connect SEL

to PASSIVE together

with short wire

3. Connect PROBE

to connector

The procedure is summarized in Diagram 2 below:

1. On the «THERAPY» panel, set the «THERAPY/DIAGNOSTICS» key to the «DIAGNOSTICS»

position (see Fig. 6).

2. On the « panel, press the «PROBE» button (see Fig. 4, number 4). In this case, the

«PROB» LED illuminates green.

3. For working with the Selector, it is necessary to connect a wire to the «PASSIVE» socket

(see Fig. 2), located on the right side of the device with the brass hand electrode.

4. Connect a short wire to the selector output «SEL» (see Fig. 2) and then to the second socket

«PASSIVE».

5. Insert the measure probe (Fig. 5) into the socket «PROBE» (Fig. 2).

For VRT testing, it is necessary to switch from Voll testing to the vegetative resonance «VRT»

test mode.



showing a low reading – usually around 20 – as it is in the Voll Testing Mode.

In order to begin testing in the VRT mode, it is necessary to place the probe on the point to

be measured, and then press and hold button «2» on the probe (see Fig. 5) for about 1 second,



Measure Mode- Press «PROBE»

LED turns green when the PROBE is pressed

Press to «DIAGNOSTICS»

MEASURES MODE

Note the meaning of below terms used in the manual:

THERAPY = HEALTH IMPROVEMENT and DIAGNOSTICS = PROGNOSIS OF HEALTH STATUS

Note the meaning of below terms used in the manual:

THERAPY = HEALTH IMPROVEMENT and DIAGNOSTICS = PROGNOSIS OF HEALTH STATUS

until the «VEGATEST» LED on the device illuminates. You will now be in the VRT testing mode,

and the indicator will automatically jump from the 20 in Voll Mode to 80 in the VRT mode. This is

summarized in Diagram 3.

Button «2» will not work if the probe is not on the point to be measured.

                 



device will now transfer back to the Voll measure mode.



to MANUAL on the «THERAPY» panel. To switch the sound ON, switch to AUTO on the THERAPY

PANEL. This is summarized in Diagram 4.



Press the BUTTON 2 on PROBE for 2 seconds

to enter VRT Mode-VEGATEST. LED will show GREEN.

Press the BUTTON 2 again when exiting

the VRT Mobe and back to VOLL Mobe

Enable Sound-press

on «AUTO» SOUND CONTROL

FOR EFFECT

Mute Sound-press

on «MANUAL»

Diagram 4: Sound Control

VRT testing using the resonator (honeycomb)

with ampoules

1. On the measures panel, press the «PROBE» button (Fig. 4, number 4). In this case, the «PROB»

LED illuminates.

2. On the «THERAPY» panel, set the «THERAPY/DIAGNOSTICS» button to the «DIAGNOSTICS»

position (see Fig. 6).

3. Now connect a long wire from the «PASSIVE» socket (see Fig. 2) with the brass hand electrode.

4. Place the «resonator plate» (Fig. 7) on the table and connect this with a wire to the second

«PASSIVE» connector (see Fig. 2).

5. Insert the measure probe into the socket «PROBE».

6. To conduct a measure test, place the ampoule in the resonator plate. One can also test

allergies to allopathic drugs, cosmetics, jewelry, and other allergens by placing these on the

resonator plate, including food intolerances.

You are now ready for testing in the VRT mode – simply place the ampoules that you wish to

test on the resonator block and use VRT testing. This is summarized in Diagram 5 below.

If one does not want to use the digitized remedies in the

Selector, one has a choice to use their own external ampoules with

homeopathic remedies, foods and the like.

In order to set this up, we need to connect the metallic

honeycomb or «resonator plate»(Fig. 7) with the device. This is how

we do this:

Fig. 7: Honeycomb or



Diagram 5 - VRT Testing Using the Resonator

WORKING & TESTING WITH AMPOULES

2. Connect the Resonator

or Honeycmb on the second

PASSIVE connector

1. Connect HAND ELECTRODE (brass cylinder)



3. Connect PROBE

to connector

VRT TESTING MODE

SOUND CONTROL

RESONATOR TESTING

Note the meaning of below terms used in the manual:

THERAPY = HEALTH IMPROVEMENT and DIAGNOSTICS = PROGNOSIS OF HEALTH STATUS

Note the meaning of below terms used in the manual:

THERAPY = HEALTH IMPROVEMENT and DIAGNOSTICS = PROGNOSIS OF HEALTH STATUS

Once the code number corresponding to the remedy is entered and the Star key (*) is pressed,

the selector will show the name of the remedy on the screen of the Professional. The remedy is

now stored in memory and ready to be administered.

In order to begin to administer this remedy to the visitor, the «OUT» button must be pressed.

Immediately on the screen a message will be displayed.

e.g. «Substance issued: N».

N - Indicates the number of remedies being administered concomitantly.

To stop administering the remedies you have to press the «OUT» key again.





that will be administered together with the previous one, you need to press the UP arrow to move

to another level – this will be indicated on the screen as numbers 1, 2, 3 and so on up to level 18.

When you change levels with the UP arrow, then it is a simple case of entering the code number

for the next remedy that you wish to use.

As mentioned above, it is possible to administer up to 18 remedies simultaneously. These can

be seen on the screen by scrolling using the UP and DOWN arrows on the Selector.

If you wish to erase a remedy from the list, then you simply enter the number zero - «0» - and

it will be erased.

ELECTRONIC SELECTOR

6.2 ELECTRONIC SELECTOR (ES)

On the «PREPARATIONS» display, the message:



remedy you wish to use, taken from the remedy manuals provided. Press « ». When you enter a

wrong number, amend it by pressing the « » key.

              

remedy, you are interested in administering. These are found in the number of remedy manuals

containing all the homeopathic and homotoxicology remedies from companies such as Heel,

Pascoe, Waleda, Regweg and more.



«POWER»

«LIGHT»

• The ELECTRONIC Selector has 18 LEVELS or FILTERS

• Use SCROLL buttons

• Use number «0» to delete input

The Electronic Selector enables one to access the 22, 000 or so

digitized remedies or ampoules stored in the memory banks of the

DeVita Professional. It enables the practitioner to access any of these

remedies in order to copy onto sugar pills as homeopathics that

can be given to the visitor, or as a direct remedy that can be given



The appearance of the module of the electronic selector is shown

in Fig. 8.

Switch on the selector with the «POWER» button. Connect «SEL»

socket and «PASSIVE» socket with a short cable (Fig. 2).

If necessary, turn on the back light indicator with the «LIGHT» key. Fig. 8: ES

«ES» PANEL

Diagram 7: Electronic Selector

The displey «PREPARATIONS» should appear as:



If you enter the wrong number, press



equivalent to ENTER. To begin

broadcastingn press OUT - selector

will display «Provide substance: N»

designation numbers.

Note the meaning of below terms used in the manual:

THERAPY = HEALTH IMPROVEMENT and DIAGNOSTICS = PROGNOSIS OF HEALTH STATUS

Note the meaning of below terms used in the manual:

THERAPY = HEALTH IMPROVEMENT and DIAGNOSTICS = PROGNOSIS OF HEALTH STATUS

6.3 SETTING UP FOR BIORESONANCE MEASURES

Before you begin bioresonance testing, you need to set up the Professional device as follows:

Connect a short length of wire on the side of the device from the SEL connector to the PASSIVE

connector – you can use any of the two passive connectors, it does not matter as they are the

same (see Fig. 2).

Connect the hand electrode to a long wire from the remaining PASSIVE connector.

Press the PROBE button (see Fig. 4).

On the SELECTOR section of the device, press POWER and LIGHT

On the «THERAPY» panel of the device, where we see the THERAPY/DIAGNOSTICS switch, place

this on the DIAGNOSTICS section.

You are now ready for bioresonance testing.





In order to be successful in bioresonance testing using the Probe, it is important to identify the





conductivity indicator should show the same. This is the energetic point that interests us.

On a technical level, there are two points to bear in mind:

• We need to get the indicator correct by applying the correct pressure - this is known as

«opening» the point or energizing the point.

• Then we can ask the question and get the answer through the indicator.

It is known as bioresonance as we use a voltage input into

the energetic point (Voltage between the measure probe and

hand electrode is 1.25 V, current is not greater than 12.5 mkA).

If the energetic signature is the same as there is no

resonance, then there will not be an indicator drop. However, if

there is resonance then there will be a stress on the Autonomic

Nervous System and we will witness an indicator drop.

It is similar to the tuning fork phenomenon.



pressure of about 100 – 150 grams.



        

reliable reading.

We need to use the lightest pressure that gives us the best reading. Using too much pressure

will result in «killing» the point and then we would need to calibrate with another point.

Always wet the probe point with a moistened cotton wool swab or use the swab directly on the



a 0.1% saline solution to moisten the cotton wool ball.

If the indicator on the Voll setting (not VRT setting) gives us a reading above 20 unit then this



     

minimal movement of the skin so will not interfere with our readings.

At the point where you place the measure probe, there will be a little hollow like a little «hole».

This takes a little practice to master but persistence and patience is what is required to master this

crucially important technique.







the pressure of your measure probe – it should not be more than 100 – 150 g.

On the second time we can release the pressure to make certain that there is an indicator





The more one practices, the better the measurement will become as our muscles get trained

to use the same pressure consistently.

When you have found the point on the Voll testing mode and the reading is above 20 unit, then



to enter the VRT mode, the indicator should automatically go to 80 (see Fig. 5, button 2).

Fig. 9

Inhaltsverzeichnis

Andere Deta-Elis Messgerät Handbücher

Deta-Elis

Deta-Elis DETA-RITM-10 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung