DEXIS SCAN EXAM Bedienungsanleitung
SCAN EXAM™
Digital imaging plate scanner
User Manual
224361-PTU rev. 1
ENGLISH
III
Copyright © 2022-05 by PaloDEx Group Oy.
All rights reserved.
DEXIS™ is a registered trademark or a common law
trademark of Dental Imaging Technologies Corporation.
Scan eXam™ and CLINIVIEW™ are either registered
trademark or trademark of PaloDEx Group Oy in the United
States and/or other countries.
All other trademarks are property of their respective owners.
Documentation, trademark and the software are copyrighted
with all rights reserved. Under the copyright laws the
documentation may not be copied, photocopied, reproduced,
translated, or reduced to any electronic medium or machine
readable form in whole or part, without the prior written
permission of PaloDEx Group Oy.
The original language of this manual is English.
PaloDEx Group Oy reserves the right to make changes in
specification and features shown herein, or discontinue the
product described at any time without notice or obligation.
Contact your PaloDEx Group Oy representative for the most
current information.
PaloDEx Group Oy
Nahkelantie 160,
FI-04300 Tuusula,
FINLAND
Tel. +358 10 270 2000
www.dexis.com
For service, contact your local distributor.
Copyright
Manufactured by
IV
V
Contents
1. Scan eXam™ ..................................................................................................... 1
1.1 Introduction.................................................................................................. 1
1.2 System installation....................................................................................... 2
2. Intraoral imaging plate unit ............................................................................. 4
2.1 Main parts and controls ............................................................................... 4
2.2 Accessories ................................................................................................. 5
2.3 Display symbols and what they mean ......................................................... 7
3 Using the system...............................................................................................11
3.1 General.......................................................................................................11
3.2 Preparing the system..................................................................................11
3.3 Preparing an IP for exposure..................................................................... 13
3.4 Imaging plate holders ................................................................................ 15
3.5 Taking an exposure ................................................................................... 16
3.6 Reading an imaging plate.......................................................................... 18
3.7 Removing IPs from the plate collector....................................................... 23
3.8 Standby mode ........................................................................................... 23
3.9 Retrieve last image.................................................................................... 24
3.10 Shutting down the unit ............................................................................ 25
3.11 IP erasing mode (Initial erasing of the IPs).............................................. 26
3.12 Taking an occlusal projection image........................................................ 27
3.13 Errors and warnings ................................................................................ 28
4. Handling and care of imaging plates............................................................. 30
4.1 General...................................................................................................... 30
4.2 Handling .................................................................................................... 30
4.3 Cleaning .................................................................................................... 31
4.4 Storage ...................................................................................................... 31
4.5 Replacement ............................................................................................. 32
4.6 Disposal..................................................................................................... 32
5. Unit care and maintenance............................................................................. 33
5.1 Cleaning the unit........................................................................................ 33
5.2 Disinfecting the unit ................................................................................... 33
5.3 Maintenance .............................................................................................. 34
5.4 Repair........................................................................................................ 34
5.5 Disposal..................................................................................................... 34
VI
6. Symbols that may appear on the unit and accessories............................... 35
7. Warnings and precautions ............................................................................. 38
Appendix A. Technical Specifications..............................................................A-1
A.1 Unit...........................................................................................................A-1
A.2 Imaging Plates and hygiene bags ............................................................A-2
A.3 Main dimensions ......................................................................................A-3
A.4 Device labels............................................................................................A-4
A.5 Electromagnetic Compatibility (EMC) tables............................................A-5
Appendix B. Installation and setup...................................................................B-1
B.1 System installation ...................................................................................B-1
B.2 Connecting the unit to a PC / LAN ...........................................................B-2
B.3 Setup options in CLINIVIEW ..................................................................B-10
B.4. Scan eXam settings with DTX Studio™ Core .......................................B-21
B.5 Troubleshooting......................................................................................B-26
SCAN EXAM 1
1. Scan eXam™
1. Scan eXam™
1.1 Introduction
This manual describes how to use the Scan eXam
digital imaging plate scanner (the unit) which is
part of the digital intraoral imaging plate system
(the system). The complete system comprises the
following:
- the Scan eXam digital imaging plate unit (the
unit).
- Dental Imaging Plates (IPs), protective covers,
hygiene bags and other related imaging plate
accessories.
- A PC (not supplied) in which suitable dental
imaging software.
- A local area network (LAN) cable (not supplied)
will be required if the system is to be used in a
network.
The unit is a laser scanning device designed to
automatically read reusable dental intraoral imaging
plate sizes 0, 1, 2, and 3. The Occlusal 4C kit also
allows two size 3 imaging plates to be used to take
an occlusal projection image. After reading the
images can be viewed on the PC using the dental
imaging sofware.
The unit can either be connection directly to the PC
or to network via the LAN cable.
The unit can be set up to work with a single PC, the
single user configuration, or with several PCs, the
Express Share (multiple user) configuration.
With the Express Share configuration up to eight
PCs can be used, one at a time, with the unit.
NOTICE:
Only personnel trained and authorized by the
manufacturer of the unit are allowed to install and
configure the unit.
2 SCAN EXAM
1. Scan eXam™
Only use the imaging plates, protective covers and
hygiene bags supplied by the manufacturer of the
unit.
Please read the section 7. Warnings and
precautions before using the unit.
1.2 System installation
Positioning the unit
Do not position the unit in direct sunlight or near
bright light. Sunlight or bright light must not be
allowed to shine directly on the unit door into which
the IPs are inserted.
Position the unit on a stable flat surface so that
vibrations will not degrade the image quality.
The unit can also be attached to a wall, under or on
a shelf with the optional mounting kit.
The unit must not be positioned so that it it touching
other equipment. It must not be placed on top of or
under other equipment.
The unit can be positioned within the environment in
which the patient is examined and treated (patient
environment).
SCAN EXAM 3
1. Scan eXam™
Positioning the PC
The PC connected to the unit should not be used in
the patient environment.
The minimum horizontal distance between the
patient and the PC is 1.5 m (4.5 ft).
The minimum vertical distance between the patient
and the PC is 2.5 m (6.5 ft).
Other devices
DO NOT connect any other devices to the unit or
the PC connected to the unit that are:
- not part of the supplied system
- not supplied by the manufacturer of the unit
- not recommended by the manufacturer of the
unit.
4 SCAN EXAM
2. Intraoral imaging plate unit
2. Intraoral imaging plate unit
2.1 Main parts and controls
Inhaltsverzeichnis
