DFI AD73 Pro Bedienungsanleitung
AD73 Pro
Rev. A+
System Board User’s Manual
Carte Mère Manuel Pour Utilisateur
System-Platine Benutzerhandbuch
Manual del Usuario de Placas Base
55100205
Copyright
This publication contains information that is protected by copyright.
No part of it may be reproduced in any form or by any means or
used to make any transformation/adaptation without the prior
written permission from the copyright holders.
This publication is provided for informational purposes only. The
manufacturer makes no representations or warranties with respect to
the contents or use of this manual and specifically disclaims any
express or implied warranties of merchantability or fitness for any
particular purpose. The user will assume the entire risk of the use or
the results of the use of this document. Further, the manufacturer
reserves the right to revise this publication and make changes to its
contents at any time, without obligation to notify any person or
entity of such revisions or changes.
© 00 . All Rights Reserved.
Trademarks
Microsoft® MS-DOS®, WindowsTM, Windows® 95, Windows® 98,
Windows® 98 SE, Windows® ME, Windows® 000, Windows NT®
4.0 and Windows® XP are registered trademarks of Microsoft
Corporation. AMD, AthlonTM and DuronTM
are registered trademarks
of Advanced Micro Devices, Inc. VIA is a registered trademark of
VIA Technologies, Inc. Award is a registered trademark of Award
Software, Inc. Other trademarks and registered trademarks of
products appearing in this manual are the properties of their
respective holders.
Caution
To avoid damage to the system:
• Use the correct AC input voltage range.
To reduce the risk of electric shock:
• Unplug the power cord before removing the system chassis
cover for installation or servicing. After installation or servicing,
cover the system chassis before plugging the power cord.
Battery:
• Danger of explosion if battery incorrectly replaced.
• Replace only with the same or equivalent type recommend by
the manufacturer.
• Dispose of used batteries according to the battery
manufacturer’s instructions.
Joystick or MIDI port:
• Do not use any joystick or MIDI device that requires more than
10A current at 5V DC. There is a risk of fire for devices that
exceed this limit.
CC and DOC Statement on Class B
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio TV technician for
help.
Notice:
1. The changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate the equipment.
. Shielded interface cables must be used in order to comply with
the emission limits.
4
Quick Setup Guide
1
Quick Setup
Guide
Table of Contents
Chapter 1
Quick Setup Guide.............................................
Chapter 2
English......................................................................
Chapter 3
Français (French).................................................
Chapter 4
Deutsch (Ger an)................................................
Chapter 5
Español (Spanish)..................................................
5
23
41
61
81
Note:
The user’s manual in the provided CD contains detailed information
about the system board. If, in some cases, some information doesn’t
match those shown in this manual, this manual should always be
regarded as the most updated version.
5
1
Quick Setup Guide
Quick Setup
Guide
Chapter 1 - Quick Setup Guide
Table of Contents
1.1 System Board Layout..................................................................................................
1. Jumpers.....................................................................................................................................
1.3 Ports and Connectors................................................................................................
1.4 Award BIOS Setup Utility.......................................................................................
6
7
10
18
Important:
To ensure proper boot up and operation of your system, you must
power-off the system then turn off the power supply’s switch or
unplug the AC power cord prior to altering the setting of a umper
or replacing the CPU.
6
Quick Setup Guide
1
Quick Setup
Guide
1.1 Syste Board Layout
J6
KB
Mouse
USB
USB 1
(J7)
USB
COM 1 (J1)
Parallel (J8)
COM 2 (J2)
Game/MIDI (J12)
Line
out
(J3)
Line
in
(J4)
Mic
in
(J5) CD-in (J13)
AUX-in (J14)
CPU fan
(J16)
Power select
USB 1 (JP4)for
PS/2 power
select (JP3)
Socket 462
(Socket A)
DIMM
standby
power LED
DDR SDRAM
DIMM 1
DDR SDRAM
DIMM 2
DDR SDRAM
DIMM 3
Primary IDE (J22)
Secondary IDE (J23)
VIA
KT-266A
VIA
VT8233ACD
CPU FSB
select (JP8)
Wake-On-Ring
(J26)
FDD (J24)
Wake-On-LAN J19
Clear CMOS (JP9)
PWR-LED
ATX-SW
G-LED G-SW
Chassis fan
(J21)
HD-LED RESET SPEAKER
USB 2 (J20)
CNR setting (JP6) Power select
USB 2 (JP7)for
Winbond
W83697HF
BIOS
JP1
JP2
IrDA
(J11)
Onboard audio
codec settings
(JP1 & JP2)
AC’97 PCI standby power LED
3.3VSB standby for PCI (JP5)
AGP Slot
PCI Slot 1
PCI Slot 2
PCI Slot 3
PCI Slot 4
PCI Slot 5
CNR Slot
TAD (J15)
Front audio
(J9)
ATX powe r
(J17)
Second chassis
fan (J18)
9
10 2
1
1
11
5
15 J25
USB 1
(Black)
Mouse
(Green)
KB
(Purple)
COM 1 COM 2
Parallel
(Burgundy)
Game/MIDI
(Gold)
Line-In
(Light Blue)
Line-Out
(Lime)
Mic-In
(Pink)
USB 2
(Black)
(Teal/Turquoise)
7
1
Quick Setup Guide
Quick Setup
Guide
1.2 Ju pers
321
Clear
CMOS (JP9)
1.2.1 Clear CMOS Data - JP9
-3 On:
Clear CMOS Data
1- On:
Normal (default)
321
321
1.2.2 Onboard Audio Codec - JP1 and JP2
1- On:
Enable the
Onboard Audio
Codec (default)
-3 On: Disable
the Onboard
Audio Codec
If you are not using the onboard audio codec, set pins and 3 to On
(Disabled) and set the “VIA-3058 AC97 Audio” (“VIA OnChip PCI
Device” field) in the Integrated Peripherals submenu of the BIOS to
Disabled.
JP1
Onboard audio
codec settings
(JP1 & JP2)
321
JP2
JP1
321
JP2
JP1
JP2
321
8
Quick Setup Guide
1
Quick Setup
Guide
1.2.4 Po er Select for USB 1 (JP4) and USB 2 (JP7)
-3 On:
5VSB
1- On:
5V (default)
1.2.3 CPU’s Front Side Bus - JP8
On: 100MHz
( 00MHz DDR) CPU
(default)
Off: 133MHz
( 66MHz DDR) CPU
To ensure proper boot up and operation of your system, you must power-
off the system then turn off the power supply’s switch or unplug the AC
power cord prior to altering the setting of the jumper.
When using a 1. GHz CPU under Windows® XP operating system, the
VIA KT- 66A chip must be installed with a fan that is connected to the
“second chassis fan” connector.
1
2
CPU FSB
select (JP8)
21
21
Power select
USB 2 (JP7
)
for
Power select
USB 1 (JP4)for
1
2
3
321
1
2
3
JP4
1
2
3
JP4
JP7
JP7
321
321
9
1
Quick Setup Guide
Quick Setup
Guide
1.2.6 CNR Settings - JP6
-3 On:
Secondary
1- On:
Primary (default)
1.2.5 Po er Select for PS/2 Keyboard/Mouse (JP3)
PS/2 power
select (JP3)
1
2
3
1
2
3
1
2
3
-3 On:
5VSB
1- On:
5V (default)
321
CNR setting
(JP6)
321
321
10
Quick Setup Guide
1
Quick Setup
Guide
1.3 Ports and Connectors
1.31 PS/2 Mouse and PS/2 Keyboard Ports
Make sure to turn off your computer
prior to connecting or disconnecting a
mouse or keyboard. Failure to do so
may damage the system board.
PS/ Mouse
PS/ Keyboard
1.3.2 Parallel Port
Parallel Port
J6
Mouse
(Green)
KB
(Purple)
Parallel
(Burgundy)
J8
Andere Handbücher für AD73 Pro
2
Inhaltsverzeichnis
Andere DFI Hauptplatine Handbücher
DFI
DFI G586IPC Bedienungsanleitung
DFI
DFI SR100-L20C Bedienungsanleitung
DFI
DFI 915P-TAL Bedienungsanleitung
DFI
DFI LANPARTY DK X58-T3EH6 Bedienungsanleitung
DFI
DFI 845PE-ML Bedienungsanleitung
DFI
DFI AM33-EC Bedienungsanleitung
DFI
DFI BW171 Bedienungsanleitung
DFI
DFI Blood-Iron G41-T33 Bedienungsanleitung
DFI
DFI SD630-H110 Bedienungsanleitung
DFI
DFI G7L332-L Bedienungsanleitung
DFI
DFI CMS310-Q470E Bedienungsanleitung
DFI
DFI AD73 Pro Bedienungsanleitung
DFI
DFI SB630-CRM Bedienungsanleitung
DFI
DFI LanParty nF4 Bedienungsanleitung
DFI
DFI 790fx-m2r Bedienungsanleitung
DFI
DFI CT930-B Bedienungsanleitung
DFI
DFI BT160 Bedienungsanleitung
DFI
DFI 915G-TMGF Bedienungsanleitung
DFI
DFI GH551 Bedienungsanleitung
DFI
DFI CS62-TC Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
Biostar
Biostar M7VIT Bravo Bedienungs- und Montageanleitung
